Subject: Re: [PATCH v3] ARM: dts: dra7: Fix duplicate USB4 target module node

From: Tony Lindgren <[email-masked]>
Date: Thu, 27 May 2021 08:48:01 +0300

Hi,

* Gowtham Tammana <[email-masked]> [210526 21:30]:
> diff --git a/arch/arm/boot/dts/am5718.dtsi b/arch/arm/boot/dts/am5718.dtsi
> index ebf4d3cc1cfb..6d7530a48c73 100644
> --- a/arch/arm/boot/dts/am5718.dtsi
> +++ b/arch/arm/boot/dts/am5718.dtsi
> @@ -17,17 +17,13 @@ / {
>   * VCP1, VCP2
>   * MLB
>   * ISS
> - * USB3, USB4
> + * USB3
>   */
>  
>  &usb3_tm {
>  	status = "disabled";
>  };
>  
> -&usb4_tm {
> -	status = "disabled";
> -};
> -
>  &atl_tm {
>  	status = "disabled";
>  };

The above makes sense as usb4 is only on dra74x and should not be even
available otherwise.

> diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
> index 149144cdff35..648d23f7f748 100644
> --- a/arch/arm/boot/dts/dra7-l4.dtsi
> +++ b/arch/arm/boot/dts/dra7-l4.dtsi
> @@ -4129,28 +4129,6 @@ usb3: usb@10000 {
>  			};
>  		};
>  
> -		usb4_tm: target-module@140000 {		/* 0x48940000, ap 75 3c.0 */
> -			compatible = "ti,sysc-omap4", "ti,sysc";
> -			reg = <0x140000 0x4>,
> -			      <0x140010 0x4>;
> -			reg-names = "rev", "sysc";
> -			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
> -			ti,sysc-midle = <SYSC_IDLE_FORCE>,
> -					<SYSC_IDLE_NO>,
> -					<SYSC_IDLE_SMART>,
> -					<SYSC_IDLE_SMART_WKUP>;
> -			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> -					<SYSC_IDLE_NO>,
> -					<SYSC_IDLE_SMART>,
> -					<SYSC_IDLE_SMART_WKUP>;
> -			/* Domains (P, C): l3init_pwrdm, l3init_clkdm */
> -			clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS4_CLKCTRL 0>;
> -			clock-names = "fck";
> -			#address-cells = <1>;
> -			#size-cells = <1>;
> -			ranges = <0x0 0x140000 0x20000>;
> -		};
> -

But let's keep the target-module@140000 here as it puts it in the right
location rather than directly on the ocp. Let's mark it with
status = "disabled" in dra7-l4.dtsi, and add a comment noting it's only
available on dra74x. So similar to what you had in your v1 patch, except
disabled.

> diff --git a/arch/arm/boot/dts/dra71x.dtsi b/arch/arm/boot/dts/dra71x.dtsi
> index cad0e4a2bd8d..9c270d8f75d5 100644
> --- a/arch/arm/boot/dts/dra71x.dtsi
> +++ b/arch/arm/boot/dts/dra71x.dtsi
> @@ -11,7 +11,3 @@
>  &rtctarget {
>  	status = "disabled";
>  };
> -
> -&usb4_tm {
> -	status = "disabled";
> -};
> diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
> index d403acc754b6..f3e934ef7d3e 100644
> --- a/arch/arm/boot/dts/dra72x.dtsi
> +++ b/arch/arm/boot/dts/dra72x.dtsi
> @@ -108,7 +108,3 @@ &pcie1_ep {
>  &pcie2_rc {
>  	compatible = "ti,dra726-pcie-rc", "ti,dra7-pcie";
>  };
> -
> -&usb4_tm {
> -	status = "disabled";
> -};

Then the above change can be kept.

> diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
> index e1850d6c841a..60f2ab8d34d5 100644
> --- a/arch/arm/boot/dts/dra74x.dtsi
> +++ b/arch/arm/boot/dts/dra74x.dtsi
> @@ -49,7 +49,7 @@ dsp2_system: dsp_system@41500000 {
>  			reg = <0x41500000 0x100>;
>  		};
>  
> -		target-module@48940000 {
> +		usb4_tm: target-module@48940000 {
>  			compatible = "ti,sysc-omap4", "ti,sysc";
>  			reg = <0x48940000 0x4>,
>  			      <0x48940010 0x4>;

And in dra74x.dtsi just set it enabled then :)

Other than that looks good to me.

Regards,

Tony

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel