Subject: Re: [PATCH 1/3] iommu/arm-smmu-v3: Print PCI vendor:device ID in SMMU translation fault logs

From: Pranjal Shrivastava <[email-masked]>
Date: Thu, 7 May 2026 17:01:13 +0000

On Wed, May 06, 2026 at 03:05:37PM +0000, Yigit Oguz wrote:
> From: Lilit Janpoladyan <[email-masked]>
> 
> For translation, address-size, access, and permission faults, look up
> the pci_dev from the event and append the PCI vendor:device ID after
> the device name, e.g.:
> 
>   event: F_TRANSLATION client: 0001:02:02.4 [1d0f:8061] sid: ...
> 
> For non-PCI devices or unassigned SIDs the output is unchanged.
> 
> Signed-off-by: Lilit Janpoladyan <[email-masked]>
> Signed-off-by: Yigit Oguz <[email-masked]>
> ---
>  drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 29 ++++++++++++++++++---
>  1 file changed, 25 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
> index e8d7dbe495f0..ab1afa36965a 100644
> --- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
> +++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
> @@ -2213,12 +2213,30 @@ static void arm_smmu_dump_raw_event(struct arm_smmu_device *smmu, u64 *raw,
>  
>  #define ARM_SMMU_EVT_KNOWN(e)	((e)->id < ARRAY_SIZE(event_str) && event_str[(e)->id])
>  #define ARM_SMMU_LOG_EVT_STR(e) ARM_SMMU_EVT_KNOWN(e) ? event_str[(e)->id] : "UNKNOWN"
> -#define ARM_SMMU_LOG_CLIENT(e)	(e)->dev ? dev_name((e)->dev) : "(unassigned sid)"
> +
> +/* "SSSS:BB:DD.F [VVVV:DDDD]\0" — 12 + 1 + 11 + 1 = 25; round to power of 2 */
> +#define ARM_SMMU_CLIENT_LEN	32
> +

Nit: s/ARM_SMMU_CLIENT_LEN/ARM_SMMU_LOG_CLIENT_LEN to maintain the
convention?

> +static const char *arm_smmu_fmt_client(struct arm_smmu_event *e, char *buf, size_t sz)
> +{
> +	struct pci_dev *p;

Minor nit: maybe we could intialized it here?

struct pci_dev *p = to_pci_dev(e->dev);

Not a strong opinion though.

> +
> +	if (!e->dev)
> +		return "(unassigned sid)";
> +	if (!dev_is_pci(e->dev))
> +		return dev_name(e->dev);
> +
> +	p = to_pci_dev(e->dev);
> +	snprintf(buf, sz, "%s [%04x:%04x]", dev_name(e->dev), p->vendor, p->device);
> +	return buf;
> +}
>  
>  static void arm_smmu_dump_event(struct arm_smmu_device *smmu, u64 *raw,
>  				struct arm_smmu_event *evt,
>  				struct ratelimit_state *rs)
>  {
> +	char clientbuf[ARM_SMMU_CLIENT_LEN];

Nit: s/clientbuf/client_str ?

I was able to test this with 7.1-rc1 & it looks good:

   [  106.880820] arm-smmu-v3 9050000.smmuv3: event: F_TRANSLATION client: 0000:00:01.0 [8086:10c9] sid: 0x8 ssid: 0x0 iova: 0xffffc000 ipa: 0x0
   [  106.880855] arm-smmu-v3 9050000.smmuv3: unpriv data read s1 "Input address caused fault" stag: 0x0
   [  106.880894] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
   [  106.880922] arm-smmu-v3 9050000.smmuv3:     0x0000000800000010
   [  106.880948] arm-smmu-v3 9050000.smmuv3:     0x0000020800000000
   [  106.880974] arm-smmu-v3 9050000.smmuv3:     0x00000000ffffc004
   [  106.881001] arm-smmu-v3 9050000.smmuv3:     0x0000000000000000
   [  106.881030] arm-smmu-v3 9050000.smmuv3: event: F_TRANSLATION client: 0000:00:01.0 [8086:10c9] sid: 0x8 ssid: 0x0 iova: 0xffffc004 ipa: 0x0
   [  106.881061] arm-smmu-v3 9050000.smmuv3: unpriv data read s1 "Input address caused fault" stag: 0x0
   [  106.881104] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
   [  106.881136] arm-smmu-v3 9050000.smmuv3:     0x0000000800000010
   [  106.881163] arm-smmu-v3 9050000.smmuv3:     0x0000020800000000
   [  106.881189] arm-smmu-v3 9050000.smmuv3:     0x00000000ffffc008
   [  106.881215] arm-smmu-v3 9050000.smmuv3:     0x0000000000000000

Apart from the nits above:

Reviewed-by: Pranjal Shrivastava <[email-masked]>
Tested-by: Pranjal Shrivastava <[email-masked]>

Thanks,
Praan