Subject: Re: [PATCH v4 1/3] dt-bindings: display: bridge: analogix-dp: Add data-lanes support for endpoint

From: Sebastian Reichel <[email-masked]>
Date: Mon, 1 Jun 2026 13:55:36 +0200

Hi,

On Fri, May 29, 2026 at 12:05:28PM +0800, Damon Ding wrote:
> Add data-lanes property support to the port@1 endpoint for physical
> lane mapping configuration.
> 
> Lane mapping is mainly used for below scenarios:
> 1. Correct PCB lane swap and differential line routing crossover
>    without hardware changes;
> 2. Adapt mismatched lane pin definitions between SoC and eDP panel;
> 3. Support multiple panel hardware variants on the same board
>    by configuring data-lanes in device tree only.
> 
> Additionally, add data-lanes setting in Rockchip eDP DT node example
> to show actual lane mapping usage.
> 
> Signed-off-by: Damon Ding <[email-masked]>
> 
> ---

Reviewed-by: Sebastian Reichel <[email-masked]>

Greetings,

-- Sebastian

> Changes in v2:
> - Add lane mapping application scenarios in commit message.
> - Remove redundant deprecated property 'data-lanes' for eDP node.
> - Update port@1 $ref to /schemas/graph.yaml#/$defs/port-base.
> 
> Changes in v3:
> - Squash data-lanes adjustment of Rockchip eDP DT example into this
>   commit.
> - Add unevaluatedProperties: false to both the port@1 and endpoint
>   nodes.
> ---
>  .../bindings/display/bridge/analogix,dp.yaml  | 19 ++++++++++++++-----
>  .../rockchip/rockchip,analogix-dp.yaml        |  1 +
>  2 files changed, 15 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
> index 62f0521b0924..ecf206871cdd 100644
> --- a/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
> @@ -42,13 +42,22 @@ properties:
>      properties:
>        port@0:
>          $ref: /schemas/graph.yaml#/properties/port
> -        description:
> -          Input node to receive pixel data.
> +        description: Input node to receive pixel data.
>  
>        port@1:
> -        $ref: /schemas/graph.yaml#/properties/port
> -        description:
> -          Port node with one endpoint connected to a dp-connector node.
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description: Port node with one endpoint connected to sink device node.
> +        properties:
> +          endpoint:
> +            $ref: /schemas/media/video-interfaces.yaml#
> +            unevaluatedProperties: false
> +            properties:
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +                items:
> +                  enum: [ 0, 1, 2, 3 ]
>  
>      required:
>        - port@0
> diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml
> index d99b23b88cc5..f690ee393fdb 100644
> --- a/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml
> +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml
> @@ -117,6 +117,7 @@ examples:
>            reg = <1>;
>  
>            edp_out_panel: endpoint {
> +            data-lanes = <0 1>;
>              remote-endpoint = <&panel_in_edp>;
>            };
>          };
> -- 
> 2.34.1
>