Subject: Re: [PATCH v3 3/4] mmc: mediatek: command queue support

From: Matthias Brugger <[email-masked]>
Date: Mon, 17 Feb 2020 10:47:23 +0100

On 17/02/2020 07:56, Chun-Hung Wu wrote:
> Support command queue for mt6779 platform.
> a. Add msdc_set_busy_timeout() to calculate emmc write timeout
> b. Connect mtk msdc driver to cqhci driver through
>    host->cq_host->ops = &msdc_cmdq_ops;
> c. msdc_cmdq_irq() will link up with cqchi_irq(). Besides, it provides
>    more irq error messages like RSPCRCERR/CMDTO/DATACRCERR/DATTMO.
> d. Use the options below to separate support for CQHCI or not, because
>    some of our platform does not support CQHCI hence no kernel option:
>    CONFIG_MMC_CQHCI.
>    #if IS_ENABLED(CONFIG_MMC_CQHCI)
>    XXX //Support CQHCI
>    #else
>    XXX //Not support CQHCI
>    #endif
> 
> Signed-off-by: Chun-Hung Wu <[email-masked]>
> ---
>  drivers/mmc/host/mtk-sd.c | 119 ++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 119 insertions(+)
> 
> diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> index 127b0cf..b132397 100644
> --- a/drivers/mmc/host/mtk-sd.c
> +++ b/drivers/mmc/host/mtk-sd.c
> @@ -31,6 +31,8 @@
>  #include <linux/mmc/sdio.h>
>  #include <linux/mmc/slot-gpio.h>
>  
> +#include "cqhci.h"
> +
>  #define MAX_BD_NUM          1024
>  
>  /*--------------------------------------------------------------------------*/
> @@ -151,6 +153,7 @@
>  #define MSDC_INT_DMA_BDCSERR    (0x1 << 17)	/* W1C */
>  #define MSDC_INT_DMA_GPDCSERR   (0x1 << 18)	/* W1C */
>  #define MSDC_INT_DMA_PROTECT    (0x1 << 19)	/* W1C */
> +#define MSDC_INT_CMDQ           (0x1 << 28)	/* W1C */
>  
>  /* MSDC_INTEN mask */
>  #define MSDC_INTEN_MMCIRQ       (0x1 << 0)	/* RW */
> @@ -181,6 +184,7 @@
>  /* SDC_CFG mask */
>  #define SDC_CFG_SDIOINTWKUP     (0x1 << 0)	/* RW */
>  #define SDC_CFG_INSWKUP         (0x1 << 1)	/* RW */
> +#define SDC_CFG_WRDTOC          (0x1fff  << 2)  /* RW */
>  #define SDC_CFG_BUSWIDTH        (0x3 << 16)	/* RW */
>  #define SDC_CFG_SDIO            (0x1 << 19)	/* RW */
>  #define SDC_CFG_SDIOIDE         (0x1 << 20)	/* RW */
> @@ -228,6 +232,7 @@
>  #define MSDC_PATCH_BIT_SPCPUSH    (0x1 << 29)	/* RW */
>  #define MSDC_PATCH_BIT_DECRCTMO   (0x1 << 30)	/* RW */
>  
> +#define MSDC_PB1_BUSY_CHECK_SEL   (0x1 << 7)    /* RW */
>  #define MSDC_PATCH_BIT1_STOP_DLY  (0xf << 8)    /* RW */
>  
>  #define MSDC_PATCH_BIT2_CFGRESP   (0x1 << 15)   /* RW */
> @@ -431,6 +436,7 @@ struct msdc_host {
>  	struct msdc_save_para save_para; /* used when gate HCLK */
>  	struct msdc_tune_para def_tune_para; /* default tune setting */
>  	struct msdc_tune_para saved_tune_para; /* tune result of CMD21/CMD19 */
> +	struct cqhci_host *cq_host;
>  };
>  
>  static const struct mtk_mmc_compatible mt8135_compat = {
> @@ -527,6 +533,18 @@ struct msdc_host {
>  	.use_internal_cd = true,
>  };
>  
> +static const struct mtk_mmc_compatible mt6779_compat = {
> +	.clk_div_bits = 12,

I suppose
.hs400_tune = false,
and with this the driver is basically the same as mt8183. So you should put in
the binding description:
"mediatek,mt6779-mmc" "mediatek,mt8183-mmc": for mmc host ip compatible with mt6779

> +	.hs400_tune = false,
> +	.pad_tune_reg = MSDC_PAD_TUNE0,
> +	.async_fifo = true,
> +	.data_tune = true,
> +	.busy_check = true,
> +	.stop_clk_fix = true,
> +	.enhance_rx = true,
> +	.support_64g = true,
> +};
> +
>  static const struct of_device_id msdc_of_ids[] = {
>  	{ .compatible = "mediatek,mt8135-mmc", .data = &mt8135_compat},
>  	{ .compatible = "mediatek,mt8173-mmc", .data = &mt8173_compat},
> @@ -536,6 +554,7 @@ struct msdc_host {
>  	{ .compatible = "mediatek,mt7622-mmc", .data = &mt7622_compat},
>  	{ .compatible = "mediatek,mt8516-mmc", .data = &mt8516_compat},
>  	{ .compatible = "mediatek,mt7620-mmc", .data = &mt7620_compat},
> +	{ .compatible = "mediatek,mt6779-mmc", .data = &mt6779_compat},

With the above mentioned, not needed.
The driver will use the fallback compatible mt8183-mmc. If in the future we find
anything special with mt6779-mmc we can still add an entry here.

Regards,
Matthias

>  	{}
>  };
>  MODULE_DEVICE_TABLE(of, msdc_of_ids);
> @@ -739,6 +758,15 @@ static void msdc_set_timeout(struct msdc_host *host, u64 ns, u64 clks)
>  		      (u32)(timeout > 255 ? 255 : timeout));
>  }
>  
> +static void msdc_set_busy_timeout(struct msdc_host *host, u64 ns, u64 clks)
> +{
> +	u64 timeout;
> +
> +	timeout = msdc_timeout_cal(host, ns, clks);
> +	sdr_set_field(host->base + SDC_CFG, SDC_CFG_WRDTOC,
> +		      (u32)(timeout > 8191 ? 8191 : timeout));
> +}
> +
>  static void msdc_gate_clock(struct msdc_host *host)
>  {
>  	clk_disable_unprepare(host->src_clk_cg);
> @@ -1425,6 +1453,36 @@ static void msdc_enable_sdio_irq(struct mmc_host *mmc, int enb)
>  		pm_runtime_put_noidle(host->dev);
>  }
>  
> +#if IS_ENABLED(CONFIG_MMC_CQHCI)
> +static irqreturn_t msdc_cmdq_irq(struct msdc_host *host, u32 intsts)
> +{
> +	int cmd_err = 0, dat_err = 0;
> +
> +	if (intsts & MSDC_INT_RSPCRCERR) {
> +		cmd_err = (unsigned int)-EILSEQ;
> +		dev_err(host->dev, "%s: CMD CRC ERR", __func__);
> +	} else if (intsts & MSDC_INT_CMDTMO) {
> +		cmd_err = (unsigned int)-ETIMEDOUT;
> +		dev_err(host->dev, "%s: CMD TIMEOUT ERR", __func__);
> +	}
> +
> +	if (intsts & MSDC_INT_DATCRCERR) {
> +		dat_err = (unsigned int)-EILSEQ;
> +		dev_err(host->dev, "%s: DATA CRC ERR", __func__);
> +	} else if (intsts & MSDC_INT_DATTMO) {
> +		dat_err = (unsigned int)-ETIMEDOUT;
> +		dev_err(host->dev, "%s: DATA TIMEOUT ERR", __func__);
> +	}
> +
> +	if (cmd_err || dat_err) {
> +		dev_err(host->dev, "cmd_err = %d, dat_err =%d, intsts = 0x%x",
> +			cmd_err, dat_err, intsts);
> +	}
> +
> +	return cqhci_irq(host->mmc, 0, cmd_err, dat_err);
> +}
> +#endif
> +
>  static irqreturn_t msdc_irq(int irq, void *dev_id)
>  {
>  	struct msdc_host *host = (struct msdc_host *) dev_id;
> @@ -1461,6 +1519,16 @@ static irqreturn_t msdc_irq(int irq, void *dev_id)
>  		if (!(events & (event_mask & ~MSDC_INT_SDIOIRQ)))
>  			break;
>  
> +#if IS_ENABLED(CONFIG_MMC_CQHCI)
> +		if ((host->mmc->caps2 & MMC_CAP2_CQE) &&
> +		    (events & MSDC_INT_CMDQ)) {
> +			msdc_cmdq_irq(host, events);
> +			/* clear interrupts */
> +			writel(events, host->base + MSDC_INT);
> +			return IRQ_HANDLED;
> +		}
> +#endif
> +
>  		if (!mrq) {
>  			dev_err(host->dev,
>  				"%s: MRQ=NULL; events=%08X; event_mask=%08X\n",
> @@ -2144,6 +2212,36 @@ static int msdc_get_cd(struct mmc_host *mmc)
>  		return !val;
>  }
>  
> +static void msdc_cqe_enable(struct mmc_host *mmc)
> +{
> +	struct msdc_host *host = mmc_priv(mmc);
> +
> +	/* enable cmdq irq */
> +	writel(MSDC_INT_CMDQ, host->base + MSDC_INTEN);
> +	/* enable busy check */
> +	sdr_set_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL);
> +	/* default write data / busy timeout 20s */
> +	msdc_set_busy_timeout(host, 20 * 1000000000ULL, 0);
> +	/* default read data timeout 1s */
> +	msdc_set_timeout(host, 1000000000ULL, 0);
> +}
> +
> +void msdc_cqe_disable(struct mmc_host *mmc, bool recovery)
> +{
> +	struct msdc_host *host = mmc_priv(mmc);
> +
> +	/* disable cmdq irq */
> +	sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INT_CMDQ);
> +	/* disable busy check */
> +	sdr_clr_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL);
> +
> +	if (recovery) {
> +		sdr_set_field(host->base + MSDC_DMA_CTRL,
> +			      MSDC_DMA_CTRL_STOP, 1);
> +		msdc_reset_hw(host);
> +	}
> +}
> +
>  static const struct mmc_host_ops mt_msdc_ops = {
>  	.post_req = msdc_post_req,
>  	.pre_req = msdc_pre_req,
> @@ -2160,6 +2258,11 @@ static int msdc_get_cd(struct mmc_host *mmc)
>  	.hw_reset = msdc_hw_reset,
>  };
>  
> +static const struct cqhci_host_ops msdc_cmdq_ops = {
> +	.enable         = msdc_cqe_enable,
> +	.disable        = msdc_cqe_disable,
> +};
> +
>  static void msdc_of_property_parse(struct platform_device *pdev,
>  				   struct msdc_host *host)
>  {
> @@ -2311,6 +2414,22 @@ static int msdc_drv_probe(struct platform_device *pdev)
>  		host->dma_mask = DMA_BIT_MASK(32);
>  	mmc_dev(mmc)->dma_mask = &host->dma_mask;
>  
> +#if IS_ENABLED(CONFIG_MMC_CQHCI)
> +	if (mmc->caps2 & MMC_CAP2_CQE) {
> +		host->cq_host = devm_kzalloc(host->mmc->parent,
> +					     sizeof(*host->cq_host),
> +					     GFP_KERNEL);
> +		host->cq_host->caps |= CQHCI_TASK_DESC_SZ_128;
> +		host->cq_host->mmio = host->base + 0x800;
> +		host->cq_host->ops = &msdc_cmdq_ops;
> +		cqhci_init(host->cq_host, mmc, true);
> +		mmc->max_segs = 128;
> +		/* cqhci 16bit length */
> +		/* 0 size, means 65536 so we don't have to -1 here */
> +		mmc->max_seg_size = 64 * 1024;
> +	}
> +#endif
> +
>  	host->timeout_clks = 3 * 1048576;
>  	host->dma.gpd = dma_alloc_coherent(&pdev->dev,
>  				2 * sizeof(struct mt_gpdma_desc),
> 

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel