Subject: Re: [PATCH v5 00/18] add thermal driver for h6

From: Clément Péron <[email-masked]>
Date: Sun, 11 Aug 2019 23:14:30 +0200

Hi Yangtao,

On 10/08/2019 07:28, Yangtao Li wrote:
> This patchset add support for A64, H3, H5, H6 and R40 thermal sensor.

Could you add the device-tree configuration in the same series?
This will allow user to test it.

Thanks,
Clément

> 
> Thx to Icenowy and Vasily.
> 
> BTY, do a cleanup in thermal makfile.
> 
> Icenowy Zheng (3):
>    thermal: sun8i: allow to use custom temperature calculation function
>    thermal: sun8i: add support for Allwinner H5 thermal sensor
>    thermal: sun8i: add support for Allwinner R40 thermal sensor
> 
> Vasily Khoruzhick (1):
>    thermal: sun8i: add thermal driver for A64
> 
> Yangtao Li (14):
>    thermal: sun8i: add thermal driver for h6
>    dt-bindings: thermal: add binding document for h6 thermal controller
>    thermal: fix indentation in makefile
>    thermal: sun8i: get ths sensor number from device compatible
>    thermal: sun8i: rework for sun8i_ths_get_temp()
>    thermal: sun8i: get ths init func from device compatible
>    thermal: sun8i: rework for ths irq handler func
>    thermal: sun8i: support mod clocks
>    thermal: sun8i: rework for ths calibrate func
>    dt-bindings: thermal: add binding document for h3 thermal controller
>    thermal: sun8i: add thermal driver for h3
>    dt-bindings: thermal: add binding document for a64 thermal controller
>    dt-bindings: thermal: add binding document for h5 thermal controller
>    dt-bindings: thermal: add binding document for r40 thermal controller
> 
>   .../bindings/thermal/sun8i-thermal.yaml       | 157 +++++
>   MAINTAINERS                                   |   7 +
>   drivers/thermal/Kconfig                       |  14 +
>   drivers/thermal/Makefile                      |   9 +-
>   drivers/thermal/sun8i_thermal.c               | 596 ++++++++++++++++++
>   5 files changed, 779 insertions(+), 4 deletions(-)
>   create mode 100644 Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml
>   create mode 100644 drivers/thermal/sun8i_thermal.c
> ---
> v5:
> -add more support
> -some trival fix
> ---
> 2.17.1
> 
> 

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel