Subject: [PATCH 1/2] ARM: dts: meson: organize devices in their corresponding busses

From: [email-masked] (Kevin Hilman)
Date: Fri, 19 May 2017 15:49:12 -0700

Martin Blumenstingl <[email-masked]> writes:

> The Amlogic Meson SoCs have most of the internal peripherals organized
> in busses. Use them to make the dts easier to read and to avoid
> duplicated register (bus) offset definitions.
>
> The bus information is taken from the vendor kernel:
> 	#define IO_CBUS_PHY_BASE        0xc1100000  ///2M
> 	#define IO_AOBUS_PHY_BASE       0xc8100000  ///1M
>
> There are more internal busses (such as the abp bus which seems to
> contain audio, HDMI and Mali registers), but since we don't have
> drivers for them yet these are not added (yet).
>
> Signed-off-by: Martin Blumenstingl <[email-masked]>

I tested this series on my meson8b-odroidc1 and it boots fine.

Series looks fine to me, except...

[...]

>  
>  		ethmac: ethernet at c9410000 {
>  			compatible = "amlogic,meson6-dwmac", "snps,dwmac";
>  			reg = <0xc9410000 0x10000
> -			       0xc1108108 0x4>;
> +			0xc1108108 0x4>;

stray tab removal?

I fixed that up locally and applied to v4.13/dt64 branch.

Thanks for the patches!

Kevin