Subject: Re: linux-next: Tree for September 3

From: Andrew Morton <[email-masked]>
Date: Thu, 4 Sep 2008 01:25:44 -0700

On Thu, 4 Sep 2008 01:02:10 -0700 (PDT) Linus Torvalds <[email-masked]> wrote:

> So this all looks ok. I'd be happier if you also actually had some actual 
> _device_ in the Cardbus slot and reported that that works, but the patch 
> clearly 

<rummages for ten minutes>

<found it!>

<plugs it in>

cs: pcmcia_socket0: unable to apply power.
pccard: CardBus card inserted into slot 0
pci 0000:07:00.0: supports D1
pci 0000:07:00.0: supports D2
pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:07:00.0: PME# disabled

sony:/home/akpm> lspci -s07:00
07:00.0 Ethernet controller: 3Com Corporation 3cCFE575CT CardBus [Cyclone] (rev 10)

seems OK.

<applies the patch, enables 3c59x.ko>

<reboots, plugs in card>

cs: pcmcia_socket0: unable to apply power.
pccard: CardBus card inserted into slot 0
pci 0000:07:00.0: supports D1
pci 0000:07:00.0: supports D2
pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:07:00.0: PME# disabled
calling  vortex_init+0x0/0x9e [3c59x]
3c59x 0000:07:00.0: enabling device (0000 -> 0003)
3c59x 0000:07:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
3c59x: Donald Becker and others.
0000:07:00.0: 3Com PCI 3CCFE575CT Tornado CardBus at f8cb2000.
3c59x 0000:07:00.0: setting latency timer to 64
initcall vortex_init+0x0/0x9e [3c59x] returned 0 after 36 msecs

can't complain about that, apart from the apparently-bogus "unable to
apply power".