Subject: linux-next: manual merge of the block tree with the jc_docs tree

From: Stephen Rothwell <[email-masked]>
Date: Tue, 25 Jun 2019 14:42:26 +1000

Hi all,

Today's linux-next merge of the block tree got a conflict in:

  Documentation/fault-injection/nvme-fault-injection.txt

between commit:

  10ffebbed550 ("docs: fault-injection: convert docs to ReST and rename to *.rst")

from the jc_docs tree and commit:

  7e31d8215fd8 ("Documentation: nvme: add an example for nvme fault injection")

from the block tree.

I fixed it up (I removed the file and applied the following patch) and
can carry the fix as necessary. This is now fixed as far as linux-next
is concerned, but any non trivial conflicts should be mentioned to your
upstream maintainer when your tree is submitted for merging.  You may
also want to consider cooperating with the maintainer of the conflicting
tree to minimise any particularly complex conflicts.

From: Stephen Rothwell <[email-masked]>
Date: Tue, 25 Jun 2019 14:39:46 +1000
Subject: [PATCH] Documentation: nvme: fix for change to rst

Signed-off-by: Stephen Rothwell <[email-masked]>
---
 .../fault-injection/nvme-fault-injection.rst  | 58 +++++++++++++++++++
 1 file changed, 58 insertions(+)

diff --git a/Documentation/fault-injection/nvme-fault-injection.rst b/Documentation/fault-injection/nvme-fault-injection.rst
index bbb1bf3e8650..cdb2e829228e 100644
--- a/Documentation/fault-injection/nvme-fault-injection.rst
+++ b/Documentation/fault-injection/nvme-fault-injection.rst
@@ -118,3 +118,61 @@ Message from dmesg::
     cpu_startup_entry+0x6f/0x80
     start_secondary+0x187/0x1e0
     secondary_startup_64+0xa5/0xb0
+
+Example 3: Inject an error into the 10th admin command
+------------------------------------------------------
+
+::
+
+  echo 100 > /sys/kernel/debug/nvme0/fault_inject/probability
+  echo 10 > /sys/kernel/debug/nvme0/fault_inject/space
+  echo 1 > /sys/kernel/debug/nvme0/fault_inject/times
+  nvme reset /dev/nvme0
+
+Expected Result::
+
+  After NVMe controller reset, the reinitialization may or may not succeed.
+  It depends on which admin command is actually forced to fail.
+
+Message from dmesg::
+
+  nvme nvme0: resetting controller
+  FAULT_INJECTION: forcing a failure.
+  name fault_inject, interval 1, probability 100, space 1, times 1
+  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.2.0-rc2+ #2
+  Hardware name: MSI MS-7A45/B150M MORTAR ARCTIC (MS-7A45), BIOS 1.50 04/25/2017
+  Call Trace:
+   <IRQ>
+   dump_stack+0x63/0x85
+   should_fail+0x14a/0x170
+   nvme_should_fail+0x38/0x80 [nvme_core]
+   nvme_irq+0x129/0x280 [nvme]
+   ? blk_mq_end_request+0xb3/0x120
+   __handle_irq_event_percpu+0x84/0x1a0
+   handle_irq_event_percpu+0x32/0x80
+   handle_irq_event+0x3b/0x60
+   handle_edge_irq+0x7f/0x1a0
+   handle_irq+0x20/0x30
+   do_IRQ+0x4e/0xe0
+   common_interrupt+0xf/0xf
+   </IRQ>
+  RIP: 0010:cpuidle_enter_state+0xc5/0x460
+  Code: ff e8 8f 5f 86 ff 80 7d c7 00 74 17 9c 58 0f 1f 44 00 00 f6 c4 02 0f 85 69 03 00 00 31 ff e8 62 aa 8c ff fb 66 0f 1f 44 00 00 <45> 85 ed 0f 88 37 03 00 00 4c 8b 45 d0 4c 2b 45 b8 48 ba cf f7 53
+  RSP: 0018:ffffffff88c03dd0 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffdc
+  RAX: ffff9dac25a2ac80 RBX: ffffffff88d53760 RCX: 000000000000001f
+  RDX: 0000000000000000 RSI: 000000002d958403 RDI: 0000000000000000
+  RBP: ffffffff88c03e18 R08: fffffff75e35ffb7 R09: 00000a49a56c0b48
+  R10: ffffffff88c03da0 R11: 0000000000001b0c R12: ffff9dac25a34d00
+  R13: 0000000000000006 R14: 0000000000000006 R15: ffffffff88d53760
+   cpuidle_enter+0x2e/0x40
+   call_cpuidle+0x23/0x40
+   do_idle+0x201/0x280
+   cpu_startup_entry+0x1d/0x20
+   rest_init+0xaa/0xb0
+   arch_call_rest_init+0xe/0x1b
+   start_kernel+0x51c/0x53b
+   x86_64_start_reservations+0x24/0x26
+   x86_64_start_kernel+0x74/0x77
+   secondary_startup_64+0xa4/0xb0
+  nvme nvme0: Could not set queue count (16385)
+  nvme nvme0: IO queues not created
-- 
2.20.1

-- 
Cheers,
Stephen Rothwell