Subject: linux-next: manual merge of the usb tree with the qcom tree

From: Stephen Rothwell <[email-masked]>
Date: Mon, 6 Jan 2025 15:17:12 +1100

Hi all,

Today's linux-next merge of the usb tree got a conflict in:

  arch/arm64/boot/dts/qcom/x1e80100-qcp.dts

between commit:

  ab8f487d2f89 ("arm64: dts: qcom: x1e80100-qcp: Enable SD card support")

from the qcom tree and commit:

  42943457e49d ("arm64: dts: qcom: x1e80100-qcp: Add FSUSB42 USB switches")

from the usb tree.

I fixed it up (see below) and can carry the fix as necessary. This
is now fixed as far as linux-next is concerned, but any non trivial
conflicts should be mentioned to your upstream maintainer when your tree
is submitted for merging.  You may also want to consider cooperating
with the maintainer of the conflicting tree to minimise any particularly
complex conflicts.

-- 
Cheers,
Stephen Rothwell

diff --cc arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
index 9a7b45066be2,f45df1396eae..000000000000
--- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
@@@ -943,13 -977,79 +1048,86 @@@
  		};
  	};
  
 +	sdc2_card_det_n: sdc2-card-det-state {
 +		pins = "gpio71";
 +		function = "gpio";
 +		drive-strength = <2>;
 +		bias-pull-up;
 +	};
 +
+ 	usb_1_ss0_sbu_default: usb-1-ss0-sbu-state {
+ 		mode-pins {
+ 			pins = "gpio166";
+ 			function = "gpio";
+ 			bias-disable;
+ 			drive-strength = <2>;
+ 			output-high;
+ 		};
+ 
+ 		oe-n-pins {
+ 			pins = "gpio168";
+ 			function = "gpio";
+ 			bias-disable;
+ 			drive-strength = <2>;
+ 		};
+ 
+ 		sel-pins {
+ 			pins = "gpio167";
+ 			function = "gpio";
+ 			bias-disable;
+ 			drive-strength = <2>;
+ 		};
+ 
+ 	};
+ 
+ 	usb_1_ss1_sbu_default: usb-1-ss1-sbu-state {
+ 		mode-pins {
+ 			pins = "gpio177";
+ 			function = "gpio";
+ 			bias-disable;
+ 			drive-strength = <2>;
+ 			output-high;
+ 		};
+ 
+ 		oe-n-pins {
+ 			pins = "gpio179";
+ 			function = "gpio";
+ 			bias-disable;
+ 			drive-strength = <2>;
+ 		};
+ 
+ 		sel-pins {
+ 			pins = "gpio178";
+ 			function = "gpio";
+ 			bias-disable;
+ 			drive-strength = <2>;
+ 		};
+ 	};
+ 
+ 	usb_1_ss2_sbu_default: usb-1-ss2-sbu-state {
+ 		mode-pins {
+ 			pins = "gpio169";
+ 			function = "gpio";
+ 			bias-disable;
+ 			drive-strength = <2>;
+ 			output-high;
+ 		};
+ 
+ 		oe-n-pins {
+ 			pins = "gpio171";
+ 			function = "gpio";
+ 			bias-disable;
+ 			drive-strength = <2>;
+ 		};
+ 
+ 		sel-pins {
+ 			pins = "gpio170";
+ 			function = "gpio";
+ 			bias-disable;
+ 			drive-strength = <2>;
+ 		};
+ 	};
+ 
  	wcd_default: wcd-reset-n-active-state {
  		pins = "gpio191";
  		function = "gpio";