Hi all, On Thu, 4 Sep 2025 10:23:19 +0100 Lee Jones wrote: > > On Thu, 04 Sep 2025, Bartosz Golaszewski wrote: > > > On Thu, 4 Sept 2025 at 08:30, Lee Jones wrote: > > > > > > On Thu, 04 Sep 2025, Stephen Rothwell wrote: > > > > > > > After merging the mfd tree, today's linux-next build (x86_64 allmodconfig) > > > > failed like this: > > > > > > > > x86_64-linux-gnu-ld: vmlinux.o: in function `stmpe_gpio_get': > > > > gpio-stmpe.c:(.text+0x21a7c29): undefined reference to `stmpe_reg_read' > > > > x86_64-linux-gnu-ld: vmlinux.o: in function `stmpe_gpio_get_direction': > > > > gpio-stmpe.c:(.text+0x21a7db2): undefined reference to `stmpe_reg_read' > > > > x86_64-linux-gnu-ld: vmlinux.o: in function `stmpe_gpio_irq_sync_unlock': > > > > gpio-stmpe.c:(.text+0x21a8166): undefined reference to `stmpe_reg_write' > > > > x86_64-linux-gnu-ld: gpio-stmpe.c:(.text+0x21a82ef): undefined reference to `stmpe_reg_read' > > > > x86_64-linux-gnu-ld: gpio-stmpe.c:(.text+0x21a8372): undefined reference to `stmpe_reg_read' > > > > x86_64-linux-gnu-ld: vmlinux.o: in function `stmpe_gpio_irq': > > > > gpio-stmpe.c:(.text+0x21a8c27): undefined reference to `stmpe_block_read' > > > > x86_64-linux-gnu-ld: gpio-stmpe.c:(.text+0x21a8f05): undefined reference to `stmpe_reg_write' > > > > x86_64-linux-gnu-ld: gpio-stmpe.c:(.text+0x21a8f89): undefined reference to `stmpe_reg_write' > > > > x86_64-linux-gnu-ld: vmlinux.o: in function `stmpe_gpio_disable': > > > > gpio-stmpe.c:(.text+0x21a91dc): undefined reference to `stmpe_disable' > > > > x86_64-linux-gnu-ld: vmlinux.o: in function `stmpe_gpio_set': > > > > gpio-stmpe.c:(.text+0x21a93a4): undefined reference to `stmpe_reg_write' > > > > x86_64-linux-gnu-ld: gpio-stmpe.c:(.text+0x21a941e): undefined reference to `stmpe_set_bits' > > > > x86_64-linux-gnu-ld: vmlinux.o: in function `stmpe_gpio_direction_output': > > > > gpio-stmpe.c:(.text+0x21a95a4): undefined reference to `stmpe_set_bits' > > > > x86_64-linux-gnu-ld: vmlinux.o: in function `stmpe_gpio_direction_input': > > > > gpio-stmpe.c:(.text+0x21a9705): undefined reference to `stmpe_set_bits' > > > > x86_64-linux-gnu-ld: vmlinux.o: in function `stmpe_gpio_request': > > > > gpio-stmpe.c:(.text+0x21a983e): undefined reference to `stmpe_set_altfunc' > > > > x86_64-linux-gnu-ld: vmlinux.o: in function `stmpe_dbg_show_one': > > > > gpio-stmpe.c:(.text+0x21a99c0): undefined reference to `stmpe_reg_read' > > > > x86_64-linux-gnu-ld: gpio-stmpe.c:(.text+0x21a9b8c): undefined reference to `stmpe_reg_read' > > > > x86_64-linux-gnu-ld: gpio-stmpe.c:(.text+0x21a9bb1): undefined reference to `stmpe_reg_read' > > > > x86_64-linux-gnu-ld: gpio-stmpe.c:(.text+0x21a9c61): undefined reference to `stmpe_reg_read' > > > > x86_64-linux-gnu-ld: gpio-stmpe.c:(.text+0x21a9e6c): undefined reference to `stmpe_reg_read' > > > > x86_64-linux-gnu-ld: vmlinux.o: in function `stmpe_gpio_probe': > > > > gpio-stmpe.c:(.text+0x21aa5b2): undefined reference to `stmpe_enable' > > > > x86_64-linux-gnu-ld: gpio-stmpe.c:(.text+0x21aa83e): undefined reference to `stmpe_disable' > > > > > > > > Presumably caused by commit > > > > > > > > e160dd0ac8c3 ("mfd: stmpe: Allow building as module") > > > > > > Okay, I have removed this patch until it can be better tested. > > > > > > > I have used the mfd tree from next-20250903 for today. > > > > > > > > Note that commit > > > > > > > > 03db20aaa3ba ("gpio: stmpe: Allow to compile as a module") > > > > > > > > is in the gpio-brgl tree which has not been merged into linux-next at > > > > this point. > > > > > > Okay, perhaps these need to go in together then. > > > > > > Thanks Stephen. > > > > > > > I can take it through the GPIO tree if you will and set up an > > immutable branch for you. Or not if the potential conflict is minimal. > > An IB would be good. Thank you. I am still seeing this failure. -- Cheers, Stephen Rothwell