Subject: linux-next: Tree for March 12, r8169 does not work

From: Максим Котов<[email-masked]>
Date: Tue, 16 Mar 2010 17:02:48 +0300

Hi!

r8169 is loaded, ifconfig says that interface is up, there are egress
packets in stat, but no ingress.
Link on remote switch is active and no packets from linux box. So
actually i think network card totally doesn't work.

I can provide some more info but i don't know what exactly is required.

Some info is below and in attachment. You may amswer directly at
linux-next@.... , i'm subscribed.
----------------------------

ckopnuo@ckopnuo ~ % uname -a
Linux ckopnuo 2.6.34-rc1-next-20100312.m-desktop+ #6 SMP Mon Mar 15
17:09:14 MSK 2010 i686 GNU/Linux

gcc -v
Using built-in specs.
Target: i486-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Debian
4.4.3-3' --with-bugurl=file:///usr/share/doc/gcc-4.4/README.Bugs
--enable-languages=c,c++,fortran,objc,obj-c++ --prefix=/usr
--enable-shared --enable-multiarch --enable-linker-build-id
--with-system-zlib --libexecdir=/usr/lib --without-included-gettext
--enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.4
--program-suffix=-4.4 --enable-nls --enable-clocale=gnu
--enable-libstdcxx-debug --enable-objc-gc --enable-targets=all
--with-arch-32=i486 --with-tune=generic --enable-checking=release
--build=i486-linux-gnu --host=i486-linux-gnu --target=i486-linux-gnu
Thread model: posix
gcc version 4.4.3 (Debian 4.4.3-3)

And dmesg

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.34-rc1-next-20100312.m-desktop+
(root@ckopnuo) (gcc version 4.4.3 (Debian 4.4.3-3) ) #6 SMP Mon Mar 15
17:09:14 MSK 2010
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f690000 (usable)
[ 0.000000] BIOS-e820: 000000003f690000 - 000000003f69e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f69e000 - 000000003f6d0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f6d0000 - 000000003f6de000 (reserved)
[ 0.000000] BIOS-e820: 000000003f6e0000 - 000000003f700000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000
(usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3f690 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03F700000 mask FFFF00000 uncachable
[ 0.000000] 2 base 03F800000 mask FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 00a00000
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 15000-1b000
[ 0.000000] RAMDISK: 2ef06000 - 2f92b1a5
[ 0.000000] ACPI: RSDP 000fb7c0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 3f690100 00054 (v01 A_M_I_ OEMXSDT 02000924
MSFT 00000097)
[ 0.000000] ACPI: FACP 3f690290 000F4 (v03 A_M_I_ OEMFACP 02000924
MSFT 00000097)
[ 0.000000] ACPI: DSDT 3f6905c0 07C37 (v01 A0846 A0846000 00000000
INTL 20051117)
[ 0.000000] ACPI: FACS 3f69e000 00040
[ 0.000000] ACPI: APIC 3f690390 0006C (v01 A_M_I_ OEMAPIC 02000924
MSFT 00000097)
[ 0.000000] ACPI: MCFG 3f690400 0003C (v01 A_M_I_ OEMMCFG 02000924
MSFT 00000097)
[ 0.000000] ACPI: OEMB 3f69e040 00080 (v01 A_M_I_ AMI_OEM 02000924
MSFT 00000097)
[ 0.000000] ACPI: HPET 3f698200 00038 (v01 A_M_I_ OEMHPET 02000924
MSFT 00000097)
[ 0.000000] ACPI: GSCI 3f69e0c0 02024 (v01 A_M_I_ GMCHSCI 02000924
MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] could not find any ACPI SRAT memory areas.
[ 0.000000] failed to get NUMA memory information from SRAT table
[ 0.000000] NUMA - single node, flat memory mode
[ 0.000000] node 0 pfn: [0 - 3f690]
[ 0.000000] Reserving 2560 pages of KVA for lmem_map of node 0 at 3ec00
[ 0.000000] remove_active_range (0, 257024, 259584)
[ 0.000000] Reserving total of a00 pages for numa KVA remap
[ 0.000000] kva_start_pfn ~ 36e00 max_low_pfn ~ 379fe
[ 0.000000] max_pfn = 3f690
[ 0.000000] 124MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] max_low_pfn = 379fe, highstart_pfn = 379fe
[ 0.000000] Low memory ends at vaddr f79fe000
[ 0.000000] node 0 will remap to vaddr f6e00000 - f7800000
[ 0.000000] allocate_pgdat: node 0 NODE_DATA f6e00000
[ 0.000000] remap_numa_kva: node 0
[ 0.000000] remap_numa_kva: f6e00000 to pfn 0003ec00
[ 0.000000] remap_numa_kva: f7000000 to pfn 0003ee00
[ 0.000000] remap_numa_kva: f7200000 to pfn 0003f000
[ 0.000000] remap_numa_kva: f7400000 to pfn 0003f200
[ 0.000000] remap_numa_kva: f7600000 to pfn 0003f400
[ 0.000000] High memory starts at vaddr f79fe000
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x0003f690
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003ec00
[ 0.000000] 0: 0x0003f600 -> 0x0003f690
[ 0.000000] On node 0 totalpages: 257055
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 250 pages used for memmap
[ 0.000000] HighMem zone: 29080 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] early_res array is doubled to 64 at [18000 - 187ff]
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 3f700000 (gap:
3f700000:bf700000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4
nr_node_ids:16
[ 0.000000] PERCPU: Embedded 13 pages/cpu @c1200000 s29972 r0 d23276 u524288
[ 0.000000] pcpu-alloc: s29972 r0 d23276 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 255025
[ 0.000000] Policy zone: HighMem
[ 0.000000] Kernel command line:
BOOT_IMAGE=/vmlinuz-2.6.34-rc1-next-20100312.m-desktop+
root=/dev/mapper/ckopnuo-root ro nosplash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Subtract (49 early reservations)
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE
[ 0.000000] #2 [0000100000 - 0000527f44] TEXT DATA BSS
[ 0.000000] #3 [002ef06000 - 002f92b1a5] RAMDISK
[ 0.000000] #4 [0000528000 - 000052d220] BRK
[ 0.000000] #5 [00000ff790 - 0000100000] BIOS reserved
[ 0.000000] #6 [00000ff780 - 00000ff790] MP-table mpf
[ 0.000000] #7 [000009fc00 - 00000f1900] BIOS reserved
[ 0.000000] #8 [00000f1a54 - 00000ff780] BIOS reserved
[ 0.000000] #9 [00000f1900 - 00000f1a54] MP-table mpc
[ 0.000000] #10 [0000010000 - 0000011000] TRAMPOLINE
[ 0.000000] #11 [0000011000 - 0000015000] ACPI WAKEUP
[ 0.000000] #12 [0000015000 - 0000018000] PGTABLE
[ 0.000000] #13 [003ec00000 - 003f600000] KVA RAM
[ 0.000000] #14 [0036e00000 - 0037800000] KVA PG
[ 0.000000] #15 [0001000000 - 0001001000] BOOTMEM
[ 0.000000] #16 [0020000000 - 00200000c0] BOOTMEM
[ 0.000000] #17 [0001001000 - 000100d000] BOOTMEM
[ 0.000000] #18 [000100d000 - 0001019000] BOOTMEM
[ 0.000000] #19 [0001019000 - 0001025000] BOOTMEM
[ 0.000000] #20 [0001025000 - 000102502d] BOOTMEM
[ 0.000000] #21 [0001025080 - 00010250af] BOOTMEM
[ 0.000000] #22 [0001025100 - 000102528c] BOOTMEM
[ 0.000000] #23 [0001025300 - 0001025340] BOOTMEM
[ 0.000000] #24 [0001025380 - 00010253c0] BOOTMEM
[ 0.000000] #25 [0001025400 - 0001025440] BOOTMEM
[ 0.000000] #26 [0001025480 - 00010254c0] BOOTMEM
[ 0.000000] #27 [0001025500 - 0001025540] BOOTMEM
[ 0.000000] #28 [0001025580 - 00010255c0] BOOTMEM
[ 0.000000] #29 [0001025600 - 0001025640] BOOTMEM
[ 0.000000] #30 [0001025680 - 00010256c0] BOOTMEM
[ 0.000000] #31 [0001025700 - 0001025740] BOOTMEM
[ 0.000000] #32 [0001025780 - 00010257c0] BOOTMEM
[ 0.000000] #33 [0001025800 - 0001025810] BOOTMEM
[ 0.000000] #34 [0001025880 - 00010258e2] BOOTMEM
[ 0.000000] #35 [0001025900 - 0001025962] BOOTMEM
[ 0.000000] #36 [0001200000 - 000120d000] BOOTMEM
[ 0.000000] #37 [0001280000 - 000128d000] BOOTMEM
[ 0.000000] #38 [0001300000 - 000130d000] BOOTMEM
[ 0.000000] #39 [0001380000 - 000138d000] BOOTMEM
[ 0.000000] #40 [0001027980 - 0001027984] BOOTMEM
[ 0.000000] #41 [0001027a00 - 0001027a04] BOOTMEM
[ 0.000000] #42 [0001027a80 - 0001027a90] BOOTMEM
[ 0.000000] #43 [0001027b00 - 0001027b10] BOOTMEM
[ 0.000000] #44 [0001027b80 - 0001027c18] BOOTMEM
[ 0.000000] #45 [0001027c80 - 0001027cb8] BOOTMEM
[ 0.000000] #46 [0001027d00 - 000102bd00] BOOTMEM
[ 0.000000] #47 [000102bd00 - 00010abd00] BOOTMEM
[ 0.000000] #48 [00010abd00 - 00010ebd00] BOOTMEM
[ 0.000000] 18 20 - 80 9f
[ 0.000000] 52e 540 - 1000 1000
[ 0.000000] 1026 - 1027
[ 0.000000] 10ec 1100 - 1200 1200
[ 0.000000] 120d 1220 - 1280 1280
[ 0.000000] 128d 12a0 - 1300 1300
[ 0.000000] 130d 1320 - 1380 1380
[ 0.000000] 138d 13a0 - 20000 20000
[ 0.000000] 20001 20020 - 2ef00 2ef06
[ 0.000000] 2f92c 2f940 - 36e00 36e00
[ 0.000000] 37800 37800 - 379e0 379fe
[ 0.000000] Initializing HighMem for node 0 (000379fe:0003f690)
[ 0.000000] Memory: 1002124k/1038912k available (2104k kernel code,
26096k reserved, 1320k data, 376k init, 117320k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc0459000 - 0xc04b7000 ( 376 kB)
[ 0.000000] .data : 0xc030e275 - 0xc0458284 (1320 kB)
[ 0.000000] .text : 0xc0100000 - 0xc030e275 (2104 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0,
CPUs=4, Nodes=16
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 5242880 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3250.042 MHz processor.
[ 0.001004] Calibrating delay loop (skipped), value calculated using
timer frequency.. 6500.08 BogoMIPS (lpj=3250042)
[ 0.001175] Security Framework initialized
[ 0.001254] TOMOYO Linux initialized
[ 0.001335] Mount-cache hash table entries: 512
[ 0.002096] Initializing cgroup subsys ns
[ 0.002174] Initializing cgroup subsys cpuacct
[ 0.002252] Initializing cgroup subsys memory
[ 0.002339] Initializing cgroup subsys devices
[ 0.002416] Initializing cgroup subsys freezer
[ 0.002493] Initializing cgroup subsys net_cls
[ 0.002570] Initializing cgroup subsys blkio
[ 0.002667] CPU: Physical Processor ID: 0
[ 0.002743] CPU: Processor Core ID: 0
[ 0.002820] mce: CPU supports 6 MCE banks
[ 0.002899] CPU0: Thermal monitoring enabled (TM2)
[ 0.003003] using mwait in idle threads.
[ 0.003083] Performance Events: Core2 events, Intel PMU driver.
[ 0.003198] ... version: 2
[ 0.003274] ... bit width: 40
[ 0.003349] ... generic registers: 2
[ 0.003425] ... value mask: 000000ffffffffff
[ 0.003503] ... max period: 000000007fffffff
[ 0.003581] ... fixed-purpose events: 3
[ 0.003656] ... event mask: 0000000700000003
[ 0.003735] Checking 'hlt' instruction... OK.
[ 0.008321] ACPI: Core revision 20100121
[ 0.016042] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.016259] Mapping cpu 0 to node 0
[ 0.016500] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.026799] CPU0: Intel Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 06
[ 0.026999] Booting Node 0, Processors #1
[ 0.001999] Initializing CPU#1
[ 0.001999] Mapping cpu 1 to node 0
[ 0.098010] Brought up 2 CPUs
[ 0.099001] Total of 2 processors activated (12999.71 BogoMIPS).
[ 0.100488] devtmpfs: initialized
[ 0.100591] regulator: core version 0.5
[ 0.101029] NET: Registered protocol family 16
[ 0.101114] ACPI: bus type pci registered
[ 0.101114] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.101167] PCI: not using MMCONFIG
[ 0.101356] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
[ 0.101435] PCI: Using configuration type 1 for base access
[ 0.102018] bio: create slab <bio-0> at 0
[ 0.103660] ACPI: EC: Look up EC in DSDT
[ 0.104683] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.109966] ACPI: SSDT 3f6a00f0 00190 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.110484] ACPI: SSDT 3f6a0280 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.110886] ACPI: Interpreter enabled
[ 0.111006] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.111180] ACPI: Using IOAPIC for interrupt routing
[ 0.111289] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.112724] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in
ACPI motherboard resources
[ 0.112860] PCI: Using MMCONFIG for extended config space
[ 0.119109] ACPI: No dock devices found.
[ 0.119186] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.120055] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.120153] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.120234] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.120315] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.120448] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.120581] pci_root PNP0A08:00: host bridge window [mem 0x3f700000-0xffffffff]
[ 0.120754] pci 0000:00:02.0: reg 10: [mem 0xfe980000-0xfe9fffff]
[ 0.120757] pci 0000:00:02.0: reg 14: [io 0xcc00-0xcc07]
[ 0.120760] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff pref]
[ 0.120763] pci 0000:00:02.0: reg 1c: [mem 0xfe800000-0xfe8fffff]
[ 0.120840] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.121023] pci 0000:00:1c.0: PME# disabled
[ 0.121089] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.121092] pci 0000:00:1c.1: PME# disabled
[ 0.121130] pci 0000:00:1d.0: reg 20: [io 0xc400-0xc41f]
[ 0.121167] pci 0000:00:1d.1: reg 20: [io 0xc480-0xc49f]
[ 0.121204] pci 0000:00:1d.2: reg 20: [io 0xc800-0xc81f]
[ 0.121241] pci 0000:00:1d.3: reg 20: [io 0xc880-0xc89f]
[ 0.121277] pci 0000:00:1d.7: reg 10: [mem 0xfe97bc00-0xfe97bfff]
[ 0.121318] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.121321] pci 0000:00:1d.7: PME# disabled
[ 0.121413] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by
ICH6 ACPI/GPIO/TCO
[ 0.121548] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.121632] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294
(mask 0003)
[ 0.121797] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.121801] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.121806] pci 0000:00:1f.1: reg 18: [io 0x08f0-0x08f7]
[ 0.121811] pci 0000:00:1f.1: reg 1c: [io 0x08f8-0x08fb]
[ 0.121816] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf]
[ 0.121844] pci 0000:00:1f.2: reg 10: [io 0xc080-0xc087]
[ 0.121848] pci 0000:00:1f.2: reg 14: [io 0xc000-0xc003]
[ 0.121852] pci 0000:00:1f.2: reg 18: [io 0xbc00-0xbc07]
[ 0.121857] pci 0000:00:1f.2: reg 1c: [io 0xb880-0xb883]
[ 0.121861] pci 0000:00:1f.2: reg 20: [io 0xb800-0xb80f]
[ 0.121879] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.121881] pci 0000:00:1f.2: PME# disabled
[ 0.121917] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.121967] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.122002] pci 0000:00:1c.0: bridge window [io f000 - 0000] reg reading
[ 0.122005] pci 0000:00:1c.0: bridge window [mem 0xfff00000 -
0x000fffff] reg reading
[ 0.122010] pci 0000:00:1c.0: bridge window [mem 0xfff00000 - 000fffff
pref] reg reading
[ 0.122066] pci 0000:01:00.0: reg 10: [io 0xd800-0xd8ff]
[ 0.122083] pci 0000:01:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 0.122095] pci 0000:01:00.0: reg 20: [mem 0xfdfe0000-0xfdfeffff 64bit pref]
[ 0.122102] pci 0000:01:00.0: reg 30: [mem 0xfeaf0000-0xfeafffff pref]
[ 0.122136] pci 0000:01:00.0: supports D1 D2
[ 0.122137] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.122141] pci 0000:01:00.0: PME# disabled
[ 0.124017] pci 0000:00:1c.1: PCI bridge to [bus 01-01]
[ 0.124108] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.124111] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.124116] pci 0000:00:1c.1: bridge window [mem 0xfdf00000-0xfdffffff
64bit pref]
[ 0.124152] pci 0000:03:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.124192] pci 0000:03:00.0: supports D1 D2
[ 0.124215] pci 0000:03:01.0: reg 10: [io 0xec00-0xec7f]
[ 0.124220] pci 0000:03:01.0: reg 14: [mem 0xfebffc00-0xfebffc7f]
[ 0.124240] pci 0000:03:01.0: reg 30: [mem 0xfebc0000-0xfebdffff pref]
[ 0.124256] pci 0000:03:01.0: supports D1 D2
[ 0.124257] pci 0000:03:01.0: PME# supported from D1 D2 D3hot
[ 0.124260] pci 0000:03:01.0: PME# disabled
[ 0.124296] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.124379] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.124382] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.124386] pci 0000:00:1e.0: bridge window [mem 0xfff00000 - 000fffff
pref] reg reading
[ 0.124388] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7]
(subtractive decode)
[ 0.124390] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff]
(subtractive decode)
[ 0.124391] pci 0000:00:1e.0: bridge window [mem
0x000a0000-0x000bffff] (subtractive decode)
[ 0.124393] pci 0000:00:1e.0: bridge window [mem
0x000d0000-0x000dffff] (subtractive decode)
[ 0.124395] pci 0000:00:1e.0: bridge window [mem
0x3f700000-0xffffffff] (subtractive decode)
[ 0.124408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.124511] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.124580] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.124622] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.130404] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.131027] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.131382] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.131732] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.132068] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 0.132506] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 0.132943] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 0.133403] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.133717] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.133717] vgaarb: loaded
[ 0.134018] PCI: Using ACPI for IRQ routing
[ 0.134084] PCI: pci_cache_line_size set to 64 bytes
[ 0.134134] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.134136] reserve RAM buffer: 000000003f690000 - 000000003fffffff
[ 0.134148] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.134148] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.134254] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.137009] Switching to clocksource tsc
[ 0.137097] pnp: PnP ACPI init
[ 0.137130] ACPI: bus type pnp registered
[ 0.140079] pnp: PnP ACPI: found 18 devices
[ 0.140156] ACPI: ACPI bus type pnp unregistered
[ 0.140237] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.140322] system 00:07: [io 0x0290-0x0297] has been reserved
[ 0.140403] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.140483] system 00:08: [io 0x0800-0x087f] has been reserved
[ 0.140563] system 00:08: [io 0x0480-0x04bf] has been reserved
[ 0.140642] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.140723] system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.140807] system 00:0b: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.140892] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.140975] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.141058] system 00:10: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.141141] system 00:11: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.141223] system 00:11: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.141305] system 00:11: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.141387] system 00:11: [mem 0x00100000-0x3f6fffff] could not be reserved
[ 0.176294] PCI: max bus depth: 1 pci_try_num: 2
[ 0.176313] pci 0000:00:1c.0: BAR 14: assigned [mem 0x3f700000-0x3f8fffff]
[ 0.176396] pci 0000:00:1c.0: BAR 15: assigned [mem
0x3f900000-0x3fafffff 64bit pref]
[ 0.176530] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.176610] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.176689] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.176771] pci 0000:00:1c.0: bridge window [mem 0x3f700000-0x3f8fffff]
[ 0.176854] pci 0000:00:1c.0: bridge window [mem 0x3f900000-0x3fafffff
64bit pref]
[ 0.176992] pci 0000:00:1c.1: PCI bridge to [bus 01-01]
[ 0.177071] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.177153] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.177236] pci 0000:00:1c.1: bridge window [mem 0xfdf00000-0xfdffffff
64bit pref]
[ 0.177372] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.177451] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.177533] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.177615] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.177702] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.177782] alloc irq_desc for 16 on node -1
[ 0.177783] alloc kstat_irqs on node -1
[ 0.177787] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.177870] pci 0000:00:1c.0: setting latency timer to 64
[ 0.177877] alloc irq_desc for 17 on node -1
[ 0.177878] alloc kstat_irqs on node -1
[ 0.177881] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.177963] pci 0000:00:1c.1: setting latency timer to 64
[ 0.177968] pci 0000:00:1e.0: setting latency timer to 64
[ 0.177970] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.177972] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.177973] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.177974] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.177976] pci_bus 0000:00: resource 8 [mem 0x3f700000-0xffffffff]
[ 0.177977] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.177979] pci_bus 0000:02: resource 1 [mem 0x3f700000-0x3f8fffff]
[ 0.177980] pci_bus 0000:02: resource 2 [mem 0x3f900000-0x3fafffff 64bit pref]
[ 0.177982] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.177983] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.177985] pci_bus 0000:01: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.177987] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.177988] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.177990] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.177991] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.177992] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.177994] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.177995] pci_bus 0000:03: resource 8 [mem 0x3f700000-0xffffffff]
[ 0.178012] NET: Registered protocol family 2
[ 0.178124] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.178343] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.178788] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.179037] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.179118] TCP reno registered
[ 0.179193] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.179277] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.179420] pci 0000:00:02.0: Boot video device
[ 0.179508] PCI: CLS 32 bytes, default 64
[ 0.179539] Unpacking initramfs...
[ 0.387149] Freeing initrd memory: 10388k freed
[ 0.391940] highmem bounce pool size: 64 pages
[ 0.392024] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.393947] VFS: Disk quotas dquot_6.5.2
[ 0.394070] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.394221] msgmni has been set to 1748
[ 0.394419] alg: No test for stdrng (krng)
[ 0.394557] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.394696] io scheduler noop registered
[ 0.394812] io scheduler cfq registered (default)
[ 0.395001] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.395026] alloc irq_desc for 24 on node -1
[ 0.395028] alloc kstat_irqs on node -1
[ 0.395036] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.395133] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.395157] alloc irq_desc for 25 on node -1
[ 0.395158] alloc kstat_irqs on node -1
[ 0.395163] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.395291] pcieport 0000:00:1c.0: Requesting control of PCIe PME from ACPI BIOS
[ 0.395436] pcieport 0000:00:1c.0: Failed to receive control of PCIe
PME service: no _OSC support
[ 0.395577] pcie_pme: probe of 0000:00:1c.0:pcie01 failed with error -13
[ 0.395659] pcieport 0000:00:1c.1: Requesting control of PCIe PME from ACPI BIOS
[ 0.395793] pcieport 0000:00:1c.1: Failed to receive control of PCIe
PME service: no _OSC support
[ 0.395938] pcie_pme: probe of 0000:00:1c.1:pcie01 failed with error -13
[ 0.398206] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.398382] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.398829] 00:0f: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.399052] Fixed MDIO Bus: probed
[ 0.399188] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at
0x60,0x64 irq 1,12
[ 0.402247] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.402327] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.402493] mice: PS/2 mouse device common for all mice
[ 0.402603] cpuidle: using governor ladder
[ 0.402681] cpuidle: using governor menu
[ 0.402906] TCP htcp registered
[ 0.403007] Using IPI No-Shortcut mode
[ 0.403173] registered taskstats version 1
[ 0.403454] Freeing unused kernel memory: 376k freed
[ 0.421299] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 0.476412] device-mapper: uevent: version 1.0.3
[ 0.476653] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05)
initialised: [email-masked]
[ 0.485085] NET: Registered protocol family 1
[ 0.559625] usbcore: registered new interface driver usbfs
[ 0.559780] usbcore: registered new interface driver hub
[ 0.560715] usbcore: registered new device driver usb
[ 0.561500] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.561612] r8169 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.561719] r8169 0000:01:00.0: (unregistered net_device): using 64-bit DMA
[ 0.562280] r8169 0000:01:00.0: setting latency timer to 64
[ 0.562317] alloc irq_desc for 26 on node -1
[ 0.562319] alloc kstat_irqs on node -1
[ 0.562330] r8169 0000:01:00.0: irq 26 for MSI/MSI-X
[ 0.562476] r8169 0000:01:00.0: eth0: RTL8102e at 0xf834e000,
00:24:8c:19:66:60, XID 04a00000 IRQ 26
[ 0.563350] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.563453] alloc irq_desc for 23 on node -1
[ 0.563454] alloc kstat_irqs on node -1
[ 0.563458] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.563552] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.563554] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.563642] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.563798] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.563897] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.567875] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.567889] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe97bc00
[ 0.577461] SCSI subsystem initialized
[ 0.577852] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.577961] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.579678] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.579813] usb usb1: Product: EHCI Host Controller
[ 0.579891] usb usb1: Manufacturer: Linux
2.6.34-rc1-next-20100312.m-desktop+ ehci_hcd
[ 0.580025] usb usb1: SerialNumber: 0000:00:1d.7
[ 0.580221] hub 1-0:1.0: USB hub found
[ 0.580298] hub 1-0:1.0: 8 ports detected
[ 0.588334] libata version 3.00 loaded.
[ 0.589820] 3c59x 0000:03:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.589930] 3c59x: Donald Becker and others.
[ 0.590027] 0000:03:01.0: 3Com PCI 3c905B Cyclone 100baseTx at f8474c00.
[ 0.593456] ata_piix 0000:00:1f.1: version 2.13
[ 0.593466] alloc irq_desc for 18 on node -1
[ 0.593467] alloc kstat_irqs on node -1
[ 0.593472] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.593579] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.593624] scsi0 : ata_piix
[ 0.593780] scsi1 : ata_piix
[ 0.594809] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.594896] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.594991] alloc irq_desc for 19 on node -1
[ 0.594992] alloc kstat_irqs on node -1
[ 0.594995] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.595082] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.595268] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.595436] scsi2 : ata_piix
[ 0.595650] scsi3 : ata_piix
[ 0.596915] ata3: SATA max UDMA/133 cmd 0xc080 ctl 0xc000 bmdma 0xb800 irq 19
[ 0.597002] ata4: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb808 irq 19
[ 0.668868] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.668979] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.669067] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.669069] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.669152] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.669307] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c400
[ 0.669411] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.669492] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.669624] usb usb2: Product: UHCI Host Controller
[ 0.669701] usb usb2: Manufacturer: Linux
2.6.34-rc1-next-20100312.m-desktop+ uhci_hcd
[ 0.669838] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.670021] hub 2-0:1.0: USB hub found
[ 0.670098] hub 2-0:1.0: 2 ports detected
[ 0.670215] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.670299] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.670301] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.670382] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.670532] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c480
[ 0.670630] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.670711] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.670855] usb usb3: Product: UHCI Host Controller
[ 0.670932] usb usb3: Manufacturer: Linux
2.6.34-rc1-next-20100312.m-desktop+ uhci_hcd
[ 0.671066] usb usb3: SerialNumber: 0000:00:1d.1
[ 0.671234] hub 3-0:1.0: USB hub found
[ 0.671311] hub 3-0:1.0: 2 ports detected
[ 0.671421] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.671505] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.671507] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.671586] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.671740] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c800
[ 0.671842] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.671923] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.672054] usb usb4: Product: UHCI Host Controller
[ 0.672131] usb usb4: Manufacturer: Linux
2.6.34-rc1-next-20100312.m-desktop+ uhci_hcd
[ 0.672263] usb usb4: SerialNumber: 0000:00:1d.2
[ 0.672432] hub 4-0:1.0: USB hub found
[ 0.672508] hub 4-0:1.0: 2 ports detected
[ 0.672616] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.672701] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.672703] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.672782] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.672938] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c880
[ 0.673036] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.673117] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.673250] usb usb5: Product: UHCI Host Controller
[ 0.673327] usb usb5: Manufacturer: Linux
2.6.34-rc1-next-20100312.m-desktop+ uhci_hcd
[ 0.673461] usb usb5: SerialNumber: 0000:00:1d.3
[ 0.673631] hub 5-0:1.0: USB hub found
[ 0.673708] hub 5-0:1.0: 2 ports detected
[ 0.798453] ata3.00: ATA-8: ST3160813AS, CC2F, max UDMA/133
[ 0.798549] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.801876] ata4.00: ATA-7: ST380815AS, 3.AAC, max UDMA/133
[ 0.801968] ata4.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.829143] ata3.01: ATA-7: ST3200820AS, 3.AAC, max UDMA/133
[ 0.829235] ata3.01: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.876870] ata4.00: configured for UDMA/133
[ 0.878443] ata3.00: configured for UDMA/133
[ 0.912467] ata3.01: configured for UDMA/133
[ 0.912623] scsi 2:0:0:0: Direct-Access ATA ST3160813AS CC2F PQ: 0 ANSI: 5
[ 0.912936] scsi 2:0:1:0: Direct-Access ATA ST3200820AS 3.AA PQ: 0 ANSI: 5
[ 0.913167] scsi 3:0:0:0: Direct-Access ATA ST380815AS 3.AA PQ: 0 ANSI: 5
[ 0.919485] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160
GB/149 GiB)
[ 0.919524] sd 2:0:1:0: [sdb] 390721968 512-byte logical blocks: (200
GB/186 GiB)
[ 0.919559] sd 2:0:1:0: [sdb] Write Protect is off
[ 0.919560] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.919575] sd 2:0:1:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 0.919664] sdb:
[ 0.919799] sd 3:0:0:0: [sdc] 156301488 512-byte logical blocks: (80.0
GB/74.5 GiB)
[ 0.919831] sd 3:0:0:0: [sdc] Write Protect is off
[ 0.919833] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 0.919847] sd 3:0:0:0: [sdc] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 0.919928] sdc: sdc1
[ 0.941845] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 0.952127] sdb1
[ 0.952172] sd 2:0:0:0: [sda] Write Protect is off
[ 0.952175] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.952199] sd 2:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 0.952523] sda: sda1 sda2 < sda5
[ 0.990995] sd 2:0:1:0: [sdb] Attached SCSI disk
[ 0.991155] sda6 >
[ 0.991545] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.077018] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 1.241406] usb 2-2: New USB device found, idVendor=046d, idProduct=c03e
[ 1.241504] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.241589] usb 2-2: Product: USB-PS/2 Optical Mouse
[ 1.241668] usb 2-2: Manufacturer: Logitech
[ 1.250629] usbcore: registered new interface driver hiddev
[ 1.263600] input: Logitech USB-PS/2 Optical Mouse as
/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input1
[ 1.263821] generic-usb 0003:046D:C03E.0001: input,hidraw0: USB HID
v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on
usb-0000:00:1d.0-2/input0
[ 1.264032] usbcore: registered new interface driver usbhid
[ 1.264114] usbhid: USB HID core driver
[ 5.676584] PM: Starting manual resume from disk
[ 5.701045] EXT4-fs (dm-1): INFO: recovery required on readonly filesystem
[ 5.701169] EXT4-fs (dm-1): write access will be enabled during recovery
[ 5.725373] EXT4-fs (dm-1): recovery complete
[ 5.726666] EXT4-fs (dm-1): mounted filesystem with ordered data mode
[ 5.898541] Not activating Mandatory Access Control now since
/sbin/tomoyo-init doesn't exist.
[ 8.046277] udev: starting version 151
[ 8.446274] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 8.446485] ACPI: Power Button [PWRB]
[ 8.446603] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 8.446745] ACPI: Power Button [PWRF]
[ 8.460947] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 8.573850] Linux agpgart interface v0.103
[ 8.575283] rtc_cmos 00:03: RTC can wake from S4
[ 8.575524] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 8.577902] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 8.578025] parport_pc 00:06: reported by Plug and Play ACPI
[ 8.578212] parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 8.666940] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 8.669225] intel_rng: FWH not detected
[ 8.671997] agpgart-intel 0000:00:00.0: Intel G33 Chipset
[ 8.672696] agpgart-intel 0000:00:00.0: detected 7164K stolen memory
[ 8.681275] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 8.924151] leds_ss4200: no LED devices found
[ 9.391152] [drm] Initialized drm 1.1.0 20060810
[ 9.599001] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.599115] i915 0000:00:02.0: setting latency timer to 64
[ 9.609078] alloc irq_desc for 27 on node -1
[ 9.609080] alloc kstat_irqs on node -1
[ 9.609087] i915 0000:00:02.0: irq 27 for MSI/MSI-X
[ 9.609092] [drm] set up 7M of stolen space
[ 9.609499] [drm] initialized overlay support
[ 9.763604] fb0: inteldrmfb frame buffer device
[ 9.763682] registered panic notifier
[ 9.763813] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 10.084549] C-Media PCI 0000:03:00.0: PCI INT A -> GSI 19 (level,
low) -> IRQ 19
[ 11.511493] loop: module loaded
[ 24.500316] fuse init (API version 7.13)
[ 24.828324] kjournald starting. Commit interval 5 seconds
[ 24.828462] EXT3-fs (dm-4): warning: maximal mount count reached,
running e2fsck is recommended
[ 24.829020] EXT3-fs (dm-4): using internal journal
[ 24.829149] EXT3-fs (dm-4): mounted filesystem with writeback data mode
[ 24.908702] kjournald starting. Commit interval 5 seconds
[ 24.909647] EXT3-fs (sda1): using internal journal
[ 24.909775] EXT3-fs (sda1): mounted filesystem with writeback data mode
[ 24.940042] EXT4-fs (sdb1): mounted filesystem with ordered data mode
[ 24.993583] Adding 2715644k swap on /dev/mapper/ckopnuo-swap_1.
Priority:-1 extents:1 across:2715644k
[ 26.815505] IPv4 FIB: Using LC-trie version 0.409
[ 26.993789] r8169 0000:01:00.0: eth0: link up
[ 26.993872] r8169 0000:01:00.0: eth0: link up
[ 28.005011] NET: Registered protocol family 10
[ 28.005392] lo: Disabled Privacy Extensions
[ 38.195053] eth0: no IPv6 routers present
[ 42.592798] eth1: setting half-duplex.
[ 42.593032] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 56.909839] RPC: Registered udp transport module.
[ 56.909968] RPC: Registered tcp transport module.
[ 56.910048] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 56.964534] Slow work thread pool: Starting up
[ 56.964643] Slow work thread pool: Ready
[ 56.964781] FS-Cache: Loaded
[ 57.004628] FS-Cache: Netfs 'nfs' registered for caching
[ 57.046908] Installing knfsd (copyright (C) 1996 [email-masked]).
[ 66.439904] Console: switching to colour frame buffer device 160x64
[ 69.704014] ------------[ cut here ]------------
[ 69.704026] WARNING: at net/sched/sch_generic.c:255 dev_watchdog+0xc6/0x12a()
[ 69.704029] Hardware name: System Product Name
[ 69.704031] NETDEV WATCHDOG: eth0 (r8169): transmit queue 0 timed out
[ 69.704034] Modules linked in: fbcon fbdev tileblit font bitblit
fbcon_rotate fbcon_cw fbcon_ud fbcon_ccw softcursor nfsd exportfs nfs
lockd fscache nfs_acl auth_rpcgss sunrpc ipv6 ext3 jbd fuse
dm_snapshot loop snd_cmipci gameport snd_pcm_oss snd_mixer_oss snd_pcm
snd_page_alloc snd_opl3_lib snd_hwdep snd_mpu401_uart snd_seq_dummy
snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq i915
snd_timer drm_kms_helper snd_seq_device drm snd fb i2c_algo_bit
soundcore cfbcopyarea video backlight led_class output intel_agp
i2c_i801 cfbimgblt mac_hid rng_core parport_pc rtc_cmos agpgart
rtc_core cfbfillrect i2c_core rtc_lib tpm_tis tpm evdev pcspkr parport
asus_atk0110 processor button tpm_bios psmouse thermal serio_raw
thermal_sys ext4 mbcache jbd2 crc16 sha256_generic aes_i586
aes_generic cbc dm_crypt usbhid hid sd_mod crc_t10dif ata_generic
uhci_hcd pata_acpi ata_piix 3c59x libata scsi_mod ehci_hcd r8169 mii
usbcore nls_base unix dm_mirror dm_region_hash dm_log dm_mod [last
unloaded: scsi_wait_scan]
[ 69.704130] Pid: 0, comm: swapper Not tainted
2.6.34-rc1-next-20100312.m-desktop+ #6
[ 69.704132] Call Trace:
[ 69.704136] [<c0131822>] warn_slowpath_common+0x65/0x7c
[ 69.704138] [<c02af666>] ? dev_watchdog+0xc6/0x12a
[ 69.704140] [<c013186d>] warn_slowpath_fmt+0x24/0x27
[ 69.704142] [<c02af666>] dev_watchdog+0xc6/0x12a
[ 69.704145] [<c013a5bf>] ? mod_timer+0x1b/0x22
[ 69.704160] [<f82e5cff>] ? usb_hcd_poll_rh_status+0x11c/0x124 [usbcore]
[ 69.704163] [<c011463c>] ? apic_write+0xf/0x11
[ 69.704166] [<c014cf3f>] ? clockevents_program_event+0xc6/0xd8
[ 69.704168] [<c013a2d0>] run_timer_softirq+0x121/0x183
[ 69.704170] [<c02af5a0>] ? dev_watchdog+0x0/0x12a
[ 69.704173] [<c0136237>] __do_softirq+0x7b/0xf5
[ 69.704175] [<c01362e2>] do_softirq+0x31/0x3c
[ 69.704177] [<c01363e5>] irq_exit+0x29/0x5c
[ 69.704179] [<c0114f25>] smp_apic_timer_interrupt+0x67/0x75
[ 69.704182] [<c030d4b5>] apic_timer_interrupt+0x31/0x38
[ 69.704185] [<c010928b>] ? mwait_idle+0x4b/0x56
[ 69.704187] [<c0102371>] cpu_idle+0x91/0xac
[ 69.704190] [<c02fc92b>] rest_init+0x67/0x69
[ 69.704193] [<c045991f>] start_kernel+0x37c/0x381
[ 69.704195] [<c04590aa>] i386_start_kernel+0xaa/0xb1
[ 69.704196] ---[ end trace cf4fe9093736560a ]---
[ 69.708056] r8169 0000:01:00.0: eth0: link up
[ 101.321857] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 101.349221] nf_conntrack version 0.5.0 (15826 buckets, 63304 max)
[ 101.349439] CONFIG_NF_CT_ACCT is deprecated and will be removed
soon. Please use
[ 101.349440] nf_conntrack.acct=1 kernel parameter, acct=1
nf_conntrack module option or
[ 101.349442] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 111.708053] r8169 0000:01:00.0: eth0: link up
[ 171.708051] r8169 0000:01:00.0: eth0: link up
[ 207.708054] r8169 0000:01:00.0: eth0: link up
[ 268.443431] ksplashx[3110]: segfault at ff000320 ip 08057803 sp
bfa3f000 error 6 in ksplashx[8048000+19000]
[ 279.708054] r8169 0000:01:00.0: eth0: link up
[ 316.004051] r8169 0000:01:00.0: eth0: link up
[ 334.004051] r8169 0000:01:00.0: eth0: link up
[ 346.004054] r8169 0000:01:00.0: eth0: link up
[ 364.004052] r8169 0000:01:00.0: eth0: link up
[ 382.004054] r8169 0000:01:00.0: eth0: link up
[ 405.245565] eth1: setting half-duplex.
[ 405.245718] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 406.004052] r8169 0000:01:00.0: eth0: link up
[ 418.004052] r8169 0000:01:00.0: eth0: link up
[ 442.004052] r8169 0000:01:00.0: eth0: link up
[ 466.005050] r8169 0000:01:00.0: eth0: link up
[ 496.980590] r8169 0000:01:00.0: eth0: link up
[ 507.079132] eth0: no IPv6 routers present
[ 533.001056] r8169 0000:01:00.0: eth0: link up
[ 563.001055] r8169 0000:01:00.0: eth0: link up
[ 587.001058] r8169 0000:01:00.0: eth0: link up
[ 611.001056] r8169 0000:01:00.0: eth0: link up
[ 641.001056] r8169 0000:01:00.0: eth0: link up
[ 659.001056] r8169 0000:01:00.0: eth0: link up
[ 683.001056] r8169 0000:01:00.0: eth0: link up
[ 701.001178] r8169 0000:01:00.0: eth0: link up
[ 725.001177] r8169 0000:01:00.0: eth0: link up
[ 749.001055] r8169 0000:01:00.0: eth0: link up
[ 773.001056] r8169 0000:01:00.0: eth0: link up
[ 776.572426] r8169 0000:01:00.0: PCI INT A disabled
[ 790.205284] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 790.205306] r8169 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 790.205326] r8169 0000:01:00.0: (unregistered net_device): using 64-bit DMA
[ 790.205353] r8169 0000:01:00.0: setting latency timer to 64
[ 790.205400] r8169 0000:01:00.0: irq 26 for MSI/MSI-X
[ 790.206323] r8169 0000:01:00.0: eth0: RTL8102e at 0xf8796000,
00:24:8c:19:66:60, XID 04a00000 IRQ 26
[ 804.816103] r8169 0000:01:00.0: eth0: link up
[ 815.299005] eth0: no IPv6 routers present
[ 835.004054] r8169 0000:01:00.0: eth0: link up
[ 859.004053] r8169 0000:01:00.0: eth0: link up

BR,
Max Kotov