From: Roger Quadros <rogerq@ti•com>
To: Tony Lindgren <tony@atomide•com>,
Naresh Kamboju <naresh.kamboju@linaro•org>,
Samuel Morris <samorris@lexmark•com>, Tejun Heo <tj@kernel•org>
Cc: linux-omap@vger•kernel.org,
Linux-Next Mailing List <linux-next@vger•kernel.org>,
open list <linux-kernel@vger•kernel.org>,
Arnd Bergmann <arnd@arndb•de>,
ssantosh@kernel•org, Olof Johansson <olof@lixom•net>,
Tero Kristo <t-kristo@ti•com>
Subject: Re: 4.18.0-rc1-next-20180619 boot failed on beagle board x15
Date: Wed, 20 Jun 2018 15:58:14 +0300 [thread overview]
Message-ID: <d5d57b10-facb-d5f7-ad7f-34afae726756@ti.com> (raw)
In-Reply-To: <20180620102904.GC112168@atomide.com>
Tony,
On 20/06/18 13:29, Tony Lindgren wrote:
> Hi,
>
> * Naresh Kamboju <naresh.kamboju@linaro•org> [180620 05:55]:
>> Linux next (4.18.0-rc1-next-20180619) boot failed on beagle board x15.
>
> Bisect points to commit aece27a2f01b ("ata: ahci_platform: allow disabling of
> hotplug to save power").
>
> Reverting the patch makes things work again. Any ideas what
> might be going wrong here? Things clearly idle but then there
> seems to be some register access with clocks disabled.
The commit is doing this in probe.
+ pm_runtime_set_active(dev);
pm_runtime_enable(dev);
- pm_runtime_get_sync(dev);
+ pm_runtime_forbid(dev);
On OMAP, the device is not guaranteed to be active at probe and so we can't
say pm_runtime_set_active() and get rid of pm_runtime_get_sync().
>
>> Full log of trace please refer this link,
>> https://lkft.validation.linaro.org/scheduler/job/291535#L946
>>
>> Here is back trace,
>> [ 3.561640] omap_rng 48090000.rng: Random Number Generator ver. 20
>> [ 3.611949] brd: module loaded
>> [ 3.641298] loop: module loaded
>> [ 3.646435] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write
>> [ 3.658481] ------------[ cut here ]------------
>> [ 3.663196] WARNING: CPU: 0 PID: 1 at
>> /srv/oe/build/tmp-rpb-glibc/work-shared/am57xx-evm/kernel-source/drivers/bus/omap_l3_noc.c:147
>> l3_interrupt_handler+0x27c/0x39c
>> [ 3.678052] 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4_CFG
>> (Read): Data Access in User mode during Functional access
>> [ 3.689330] Modules linked in:
>> [ 3.692426] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
>> 4.18.0-rc1-next-20180619 #1
>> [ 3.699952] Hardware name: Generic DRA74X (Flattened Device Tree)
>> [ 3.706099] [<c04156f0>] (unwind_backtrace) from [<c040eec4>]
>> (show_stack+0x20/0x24)
>> [ 3.713897] [<c040eec4>] (show_stack) from [<c116a668>]
>> (dump_stack+0xb0/0xdc)
>> [ 3.721171] [<c116a668>] (dump_stack) from [<c0450a14>] (__warn+0x118/0x130)
>> [ 3.728270] [<c0450a14>] (__warn) from [<c0450a84>]
>> (warn_slowpath_fmt+0x58/0x74)
>> [ 3.735808] [<c0450a84>] (warn_slowpath_fmt) from [<c08be648>]
>> (l3_interrupt_handler+0x27c/0x39c)
>> [ 3.744742] [<c08be648>] (l3_interrupt_handler) from [<c04cd270>]
>> (__handle_irq_event_percpu+0x90/0x45c)
>> [ 3.754286] [<c04cd270>] (__handle_irq_event_percpu) from
>> [<c04cd678>] (handle_irq_event_percpu+0x3c/0x8c)
>> [ 3.764001] [<c04cd678>] (handle_irq_event_percpu) from
>> [<c04cd710>] (handle_irq_event+0x48/0x6c)
>> [ 3.772933] [<c04cd710>] (handle_irq_event) from [<c04d170c>]
>> (handle_fasteoi_irq+0xb0/0x164)
>> [ 3.781513] [<c04d170c>] (handle_fasteoi_irq) from [<c04cc344>]
>> (generic_handle_irq+0x34/0x44)
>> [ 3.790183] [<c04cc344>] (generic_handle_irq) from [<c04cca48>]
>> (__handle_domain_irq+0x6c/0xc4)
>> [ 3.798941] [<c04cca48>] (__handle_domain_irq) from [<c0402528>]
>> (gic_handle_irq+0x68/0xac)
>> [ 3.807347] [<c0402528>] (gic_handle_irq) from [<c04019bc>]
>> (__irq_svc+0x5c/0x7c)
>> [ 3.814874] Exception stack(0xee179c70 to 0xee179cb8)
>> [ 3.819963] 9c60: fc140000
>> ee3e2f10 ee3a9810 00000000
>> [ 3.828189] 9c80: 00000000 ee3e2f10 fc140004 fc140000 ee3a9800
>> ee3a9810 00000000 ee179cdc
>> [ 3.836414] 9ca0: ee179ce0 ee179cc0 c0c3b364 c0c3b2ec 60000013 ffffffff
>> [ 3.843079] [<c04019bc>] (__irq_svc) from [<c0c3b2ec>]
>> (ahci_enable_ahci+0x24/0x70)
>> [ 3.850789] [<c0c3b2ec>] (ahci_enable_ahci) from [<c0c3b364>]
>> (ahci_save_initial_config+0x2c/0x388)
>> [ 3.859894] [<c0c3b364>] (ahci_save_initial_config) from
>> [<c0c3cbdc>] (ahci_platform_init_host+0x9c/0x4f4)
>> [ 3.869609] [<c0c3cbdc>] (ahci_platform_init_host) from
>> [<c0c3c33c>] (ahci_probe+0xa0/0xc0)
>> [ 3.878018] [<c0c3c33c>] (ahci_probe) from [<c0ba40f0>]
>> (platform_drv_probe+0x58/0xac)
>> [ 3.885989] [<c0ba40f0>] (platform_drv_probe) from [<c0ba1aec>]
>> (driver_probe_device+0x25c/0x338)
>> [ 3.894915] [<c0ba1aec>] (driver_probe_device) from [<c0ba1cbc>]
>> (__driver_attach+0xf4/0xf8)
>> [ 3.903411] [<c0ba1cbc>] (__driver_attach) from [<c0b9f9ac>]
>> (bus_for_each_dev+0x78/0xc4)
>> [ 3.911643] [<c0b9f9ac>] (bus_for_each_dev) from [<c0ba13b8>]
>> (driver_attach+0x2c/0x30)
>> [ 3.919696] [<c0ba13b8>] (driver_attach) from [<c0ba0cfc>]
>> (bus_add_driver+0x114/0x220)
>> [ 3.927752] [<c0ba0cfc>] (bus_add_driver) from [<c0ba2e2c>]
>> (driver_register+0x88/0x11c)
>> [ 3.935896] [<c0ba2e2c>] (driver_register) from [<c0ba4044>]
>> (__platform_driver_register+0x50/0x58)
>> [ 3.945003] [<c0ba4044>] (__platform_driver_register) from
>> [<c1aa9cf0>] (ahci_driver_init+0x24/0x28)
>> [ 3.954195] [<c1aa9cf0>] (ahci_driver_init) from [<c0403a8c>]
>> (do_one_initcall+0x9c/0x434)
>> [ 3.962517] [<c0403a8c>] (do_one_initcall) from [<c1a01410>]
>> (kernel_init_freeable+0x3b8/0x53c)
>> [ 3.971276] [<c1a01410>] (kernel_init_freeable) from [<c118551c>]
>> (kernel_init+0x18/0x128)
>> [ 3.979597] [<c118551c>] (kernel_init) from [<c04010ac>]
>> (ret_from_fork+0x14/0x28)
>> [ 3.987210] Exception stack(0xee179fb0 to 0xee179ff8)
>> [ 3.992298] 9fa0: 00000000
>> 00000000 00000000 00000000
>> [ 4.000524] 9fc0: 00000000 00000000 00000000 00000000 00000000
>> 00000000 00000000 00000000
>> [ 4.008750] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000
>> [ 4.015405] irq event stamp: 663130
>> [ 4.018926] hardirqs last enabled at (663129): [<c118d9d4>]
>> _raw_spin_unlock_irqrestore+0x40/0x6c
>> [ 4.027939] hardirqs last disabled at (663130): [<c04019ac>]
>> __irq_svc+0x4c/0x7c
>> [ 4.035384] softirqs last enabled at (661486): [<c0402c98>]
>> __do_softirq+0x2a8/0x5e8
>> [ 4.043262] softirqs last disabled at (661449): [<c04594a4>]
>> irq_exit+0x178/0x1a4
>> [ 4.050826] ---[ end trace 095abac70926448f ]---
>>
>> Best regards
>> Naresh Kamboju
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
>> the body of a message to majordomo@vger•kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
cheers,
-roger
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
next prev parent reply other threads:[~2018-06-20 12:58 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-20 5:52 4.18.0-rc1-next-20180619 boot failed on beagle board x15 Naresh Kamboju
2018-06-20 10:29 ` Tony Lindgren
2018-06-20 12:57 ` Samuel Morris
2018-06-20 12:58 ` Roger Quadros [this message]
2018-06-20 15:30 ` Samuel Morris
2018-06-21 7:58 ` Roger Quadros
2018-06-21 12:02 ` Rafael J. Wysocki
2018-06-21 14:31 ` Samuel Morris
2018-06-21 14:53 ` Roger Quadros
2018-07-02 9:32 ` Tony Lindgren
2018-07-02 13:31 ` Samuel Morris
2018-07-17 6:08 ` Tony Lindgren
2018-07-17 8:00 ` Stephen Rothwell
2018-07-17 8:03 ` Tony Lindgren
2018-07-18 5:05 ` Keerthy
2018-08-05 23:30 ` Stephen Rothwell
2018-08-06 17:24 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d5d57b10-facb-d5f7-ad7f-34afae726756@ti.com \
--to=rogerq@ti$(echo .)com \
--cc=arnd@arndb$(echo .)de \
--cc=linux-kernel@vger$(echo .)kernel.org \
--cc=linux-next@vger$(echo .)kernel.org \
--cc=linux-omap@vger$(echo .)kernel.org \
--cc=naresh.kamboju@linaro$(echo .)org \
--cc=olof@lixom$(echo .)net \
--cc=samorris@lexmark$(echo .)com \
--cc=ssantosh@kernel$(echo .)org \
--cc=t-kristo@ti$(echo .)com \
--cc=tj@kernel$(echo .)org \
--cc=tony@atomide$(echo .)com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox