* Re: ATM driver for 8260
2001-02-06 17:32 ` Dave Pegler
@ 2001-02-04 13:59 ` Mark Clayton
0 siblings, 0 replies; 3+ messages in thread
From: Mark Clayton @ 2001-02-04 13:59 UTC (permalink / raw)
To: Dave Pegler; +Cc: linuxppc-embedded, dwp
I was under the impression that the 8260 and the 860 were very different.
After looking at the example code from Motorola. I'm not so sure that I
would be much help in working on it.
Much thanks,
Mark
On Tue, 06 Feb 2001, Dave Pegler wrote:
> Mark,
>
> I've been working on a driver for the MPC860SAR (855T / 857 /
> 862SAR). It supports AAL0, AAL5, CBR and UBR and is integrated into
> linux ATM version 0.59 (so you get Q.2931, RFC1577, ILMI etc). I use
> a FADS 860 with a SAR-PHY daughter card (STM-1/STS-3c, E1/T1 and
> ATM25) as the development platform.
>
> Unfortunately its not finished yet and has quite a low throughput. I've not
> worked on it for about 3 months but hope to do so in the next few weeks.
>
> Dave.
>
> Mark Clayton writes:
> >
> > Is anyone aware of a linux driver for the ADS8260. Or any 8260?
> >
> > Thanks,
> > Mark
> >
> >
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
* ATM driver for 8260
@ 2001-02-06 15:11 Mark Clayton
2001-02-06 17:32 ` Dave Pegler
0 siblings, 1 reply; 3+ messages in thread
From: Mark Clayton @ 2001-02-06 15:11 UTC (permalink / raw)
To: linuxppc-embedded
Is anyone aware of a linux driver for the ADS8260. Or any 8260?
Thanks,
Mark
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
* ATM driver for 8260
2001-02-06 15:11 ATM driver for 8260 Mark Clayton
@ 2001-02-06 17:32 ` Dave Pegler
2001-02-04 13:59 ` Mark Clayton
0 siblings, 1 reply; 3+ messages in thread
From: Dave Pegler @ 2001-02-06 17:32 UTC (permalink / raw)
To: Mark Clayton; +Cc: linuxppc-embedded, dwp
Mark,
I've been working on a driver for the MPC860SAR (855T / 857 /
862SAR). It supports AAL0, AAL5, CBR and UBR and is integrated into
linux ATM version 0.59 (so you get Q.2931, RFC1577, ILMI etc). I use
a FADS 860 with a SAR-PHY daughter card (STM-1/STS-3c, E1/T1 and
ATM25) as the development platform.
Unfortunately its not finished yet and has quite a low throughput. I've not
worked on it for about 3 months but hope to do so in the next few weeks.
Dave.
Mark Clayton writes:
>
> Is anyone aware of a linux driver for the ADS8260. Or any 8260?
>
> Thanks,
> Mark
>
>
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2001-02-06 17:32 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-02-06 15:11 ATM driver for 8260 Mark Clayton
2001-02-06 17:32 ` Dave Pegler
2001-02-04 13:59 ` Mark Clayton
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox