Subject: RE: [PATCH] [UPDATED] tsec: Allow Ten Bit Interface to be configurable

From: "Joe Hamman" <[email-masked]>
Date: Mon, 13 Aug 2007 22:29:44 -0500

> -----Original Message-----
> From: Kumar Gala [mailto:[email-masked]]
> Sent: Monday, August 13, 2007 10:10 PM
> To: [email-masked]
> Cc: [email-masked]
> Subject: Re: [PATCH] [UPDATED] tsec: Allow Ten Bit Interface to be
> configurable
> 
> 
> On Aug 13, 2007, at 5:37 PM, Joe Hamman wrote:
> 
> > Allow the address of the Ten Bit Interface (TBI) to be changed in the
> > event of a conflict with another device.
> >
> > Signed-off by: Joe Hamman <[email-masked]>
> > ---
> >
> > Please ignore the last patch - I missed a cut & paste error on the
> > range
> > that my testing didn't catch.
> 
> I think we'd rather this came from the device tree.
> 
Duh, that makes sense ;-)

Has there been any discussion yet?  Maybe something like this:

		mdio@24520 {
			#address-cells = <1>;
			#size-cells = <0>;
			device_type = "mdio";
			compatible = "gianfar";
			reg = <24520 20>;
			phy0: ethernet-phy@0 {
				interrupt-parent = <&mpic>;
				interrupts = <a 1>;
				reg = <0>;
				device_type = "ethernet-phy";
			};
			phy1: ethernet-phy@1 {
				interrupt-parent = <&mpic>;
				interrupts = <a 1>;
				reg = <1>;
				device_type = "ethernet-phy";
			};
			phy2: ethernet-phy@2 {
				interrupt-parent = <&mpic>;
				interrupts = <a 1>;
				reg = <2>;
				device_type = "ethernet-phy";
			};
			phy3: ethernet-phy@3 {
				interrupt-parent = <&mpic>;
				interrupts = <a 1>;
				reg = <3>;
				device_type = "ethernet-phy";
			};
			tbi:  ethernet-tbi@1f {
				reg = <1f>;
				device_type = "ethernet-tbi";
			};
		};

Thanks,
Joe