Subject: [PATCH] 85xx PHY Platform Update

From: "info" <[email-masked]>
Date: Mon, 24 Oct 2005 22:49:42 +0800

Andy, Kumar

I try this patch for RMC-G8500 from GDAtech, error message below:
---------------------------------------------------------------------------------
 [root@ppclinux linux-2.6.13]# make uImage
  CHK     include/linux/version.h
  CHK     include/linux/compile.h
  CHK     usr/initramfs_list
  CC      drivers/net/gianfar.o
drivers/net/gianfar.c: In function `gfar_probe':
drivers/net/gianfar.c:217: error: structure has no member named `phy_reg_addr'
drivers/net/gianfar.c: In function `init_phy':
drivers/net/gianfar.c:452: error: structure has no member named `phyid'
drivers/net/gianfar.c: In function `stop_gfar':
drivers/net/gianfar.c:636: error: structure has no member named `interruptPHY'
drivers/net/gianfar.c: In function `gfar_phy_startup_timer':
drivers/net/gianfar.c:1818: error: structure has no member named `interruptPHY'
drivers/net/gianfar.c:1826: error: structure has no member named `interruptPHY'
make[2]: *** [drivers/net/gianfar.o] Error 1
make[1]: *** [drivers/net] Error 2
make: *** [drivers] Error 2

---------------------------------------------------------------------------------
because???
 
 /* Internal interrupts are all Level Sensitive, and Positive Polarity */
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -47,14 +47,19 @@
 struct gianfar_platform_data {
 	/* device specific information */
 	u32 device_flags;
-	u32 phy_reg_addr;
 
 	/* board specific information */
 	u32 board_flags;
-	u32 phy_flags;
-	u32 phyid;
-	u32 interruptPHY;
+	const char *bus_id;
 	u8 mac_addr[6];
+};
+

-------------------------------------------------------------------------------------------
<This patch updates the 85xx platform code to support the new PHY Layer.
<
<Signed-off-by: Andy Fleming <afleming at freescale.com>
<Signed-off-by: Kumar Gala <Kumar.gala at freescale.com>
<
<
<diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.c b/arch/ppc/platforms/85xx/mpc8540_ads.c
<--- a/arch/ppc/platforms/85xx/mpc8540_ads.c
<+++ b/arch/ppc/platforms/85xx/mpc8540_ads.c
<@@ -53,6 +53,10 @@
< 
< #include <syslib/ppc85xx_setup.h>
< 
<+static const char *GFAR_PHY_0 = "phy0:0";
<+static const char *GFAR_PHY_1 = "phy0:1";
<+static const char *GFAR_PHY_3 = "phy0:3";
<+
< /* ************************************************************************
<  *
<  * Setup the architecture
<@@ -64,6 +68,7 @@ mpc8540ads_setup_arch(void)