Subject: [PATCH 1/5 v2] Add the explanation and a sample of RapidIO DTS sector to the document of booting-without-of.txt file.

From: Zhang Wei <[email-masked]>
Date: Wed, 27 Jun 2007 16:35:44 +0800

Add the explanation and a sample of RapidIO DTS sector to the document of booting-without-of.txt file.

Signed-off-by: Zhang Wei <[email-masked]>
---
 Documentation/powerpc/booting-without-of.txt |   34 ++++++++++++++++++++++++++
 1 files changed, 34 insertions(+), 0 deletions(-)

diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index b49ce16..98692ca 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1727,6 +1727,40 @@ platforms are moved over to use the flattened-device-tree model.
  		partition-names = "fs\0firmware";
  	};
 
+   k) RapidIO
+
+   Required properties:
+
+    - compatible : Should be "fsl,rapidio-delta" for Freescale
+      PowerPC RapidIO controller.
+    - #address-cells : Address representation for "rapidio" devices.
+      This field represents the number of cells needed to represent
+      the RapidIO address of the registers.  For supporting more than
+      32-bits RapidIO address, this field should be <2>.
+      See 1) above for more details on defining #address-cells.
+    - reg : Offset and length of the register set for the device
+    - ranges : Should be defined as specified in 1) to describe the
+      translation of addresses for memory mapped RapidIO memory
+      space.
+    - interrupts : binding interrupts for this device sector,
+      please follow below orders:
+      <err_irq bell_outb_irq bell_inb_irq msg1_tx_irq msg1_rx_irq
+      msg2_tx_irq msg2_rx_irq ... msgN_tx_irq msgN_rx_irq>.
+
+  Example:
+
+	srio@c0000{
+		compatible = "fsl,rapidio-delta";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <c0000 20000>;
+		ranges = <0 0 c0000000 20000000>;
+		interrupt-parent = <&mpic>;
+		/* err_irq bell_outb_irq bell_inb_irq msg1_tx_irq msg1_rx_irq
+						      msg2_tx_irq msg2_rx_irq */
+		interrupts = <30 2 31 2 32 2 35 2 36 2 37 2 38 2>;
+	};
+
    More devices will be defined as this spec matures.
 
 VII - Specifying interrupt information for devices
-- 
1.5.1