Subject: Re: Load Kernel 2.6 using U-boot on ML403

From: Robert Woodworth <[email-masked]>
Date: Mon, 28 Jan 2008 08:51:09 -0700

If you're starting a new design, I *highly* recommend using EDK9.2 with
MPMC3 and LL_TEMAC.

Using the Wizard in EDK9.2 and using the kernel from git.xilinx.com
everything will work fine out-of-the-box.  Including the ethernet.

I've had troubles with the older (EDK9.1) TEMAC and GigE switches not
syncing correctly.   The LL_TEMAC in EDK9.2 solved this issue.

RJW.

On Sun, 2008-01-27 at 20:25 -0800, Yedu Jathavedan wrote:
> >
> > Looking at your bootlog, it doesn't look like you've got the systemace
> > driver built into the kernel.
> >
> >
> Grant,
> 
> Yes, the systemace was not built into the kernel. It is successfully  
> booting the kernel now.
> Trying to bring up the Ethernet interface. Any pointers?
> 
> Thank you,
> Yedu
> _______________________________________________
> Linuxppc-embedded mailing list
> [email-masked]
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded