Subject: [PATCH 2/3] powerpc/pci: Add missing hookup to pci_slot

From: Benjamin Herrenschmidt <[email-masked]>
Date: Wed, 27 Jan 2010 14:10:05 +1100

Add missing hookup to existing pci_slot when building the pci_dev from
scratch off the Open Firmware device-tree

Signed-off-by: Benjamin Herrenschmidt <[email-masked]>
---
 arch/powerpc/kernel/pci_of_scan.c |    5 +++++
 1 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
index 693eb9a..b6b2e86 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -123,6 +123,7 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
 {
 	struct pci_dev *dev;
 	const char *type;
+	struct pci_slot *slot;
 
 	dev = alloc_pci_dev();
 	if (!dev)
@@ -142,6 +143,10 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
 	dev->needs_freset = 0;		/* pcie fundamental reset required */
 	set_pcie_port_type(dev);
 
+	list_for_each_entry(slot, &dev->bus->slots, list)
+		if (PCI_SLOT(dev->devfn) == slot->number)
+			dev->slot = slot;
+
 	dev->vendor = get_int_prop(node, "vendor-id", 0xffff);
 	dev->device = get_int_prop(node, "device-id", 0xffff);
 	dev->subsystem_vendor = get_int_prop(node, "subsystem-vendor-id", 0);