Subject: [PATCH v2] lite5200: fix ethernet phy address

From: Dmitry Eremin-Solenikov <[email-masked]>
Date: Thu, 10 Jun 2010 11:16:20 +0400

According to my schematics, on Lite5200 board ethernet phy uses address
0 (all ADDR lines are pulled down). With this change I can talk to
onboard phy (LXT971) and correctly use autonegotiation.

Signed-off-by: Dmitry Eremin-Solenikov <[email-masked]>
Cc: René Bürgel <[email-masked]>
Cc: Paul Mackerras <[email-masked]>
Cc: Grant Likely <[email-masked]>
Cc: Yogesh Chaudhari <[email-masked]>
Signed-off-by: Dmitry Eremin-Solenikov <[email-masked]>
---
 arch/powerpc/boot/dts/lite5200.dts |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
index 82ff2b1..2b64d8e 100644
--- a/arch/powerpc/boot/dts/lite5200.dts
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -230,8 +230,8 @@
 			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
 			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
 
-			phy0: ethernet-phy@1 {
-				reg = <1>;
+			phy0: ethernet-phy@0 {
+				reg = <0>;
 			};
 		};
 
-- 
1.7.1