Subject: RE: [PATCH 1/2] mtd/nand: fixup for fmr initialization of Freescale NAND controller

From: Artem Bityutskiy <[email-masked]>
Date: Thu, 22 Dec 2011 12:24:00 +0200

On Tue, 2011-12-20 at 06:40 +0000, Liu Shengzhou-B36685 wrote:
> > -----Original Message-----
> > From: Artem Bityutskiy [mailto:[email-masked]]
> > Sent: Saturday, December 17, 2011 10:45 PM
> > To: Liu Shengzhou-B36685
> > Cc: [email-masked]; Wood Scott-B07421;
> > [email-masked]; Gala Kumar-B11780; [email-masked]
> > Subject: Re: [PATCH 1/2] mtd/nand: fixup for fmr initialization of
> > Freescale NAND controller
> > 
> > On Mon, 2011-12-12 at 17:40 +0800, Shengzhou Liu wrote:
> > > There was a bug for fmr initialization, which lead to  fmr was always
> > > 0x100 in fsl_elbc_chip_init() and caused FCM command timeout before
> > > calling fsl_elbc_chip_init_tail(), now we initialize CWTO to maximum
> > > timeout value and not relying on the setting of bootloader.
> > >
> > > Signed-off-by: Shengzhou Liu <[email-masked]>
> > 
> > Pushed both to l2-mtd-2.6.git, thanks!
> > 
> > --
> > Best Regards,
> > Artem Bityutskiy
> 
> I noted it had been applied in linux-next.git tree.
> Does it still need to l2-mtd-2.6.git? 
> Thanks.

It is in linux-next because it is pulled there from l2-mtd-2.6.git.
Thanks for head up, but no, it should stay in the l2-mtd-2.6.git.
David Woodhouse then should take care of merging the l2 tree upstream.

-- 
Best Regards,
Artem Bityutskiy