Subject: [PATCH 3/3] serial/8250: delete WR SBC850 UART quirk handling

From: Paul Gortmaker <[email-masked]>
Date: Tue, 26 Jun 2012 15:54:29 -0400

We've are dropping the support for the EOL SBC8560, so we can
also delete this variant of the Alpha quirk support.

Cc: Alan Cox <[email-masked]>
Cc: Greg Kroah-Hartman <[email-masked]>
Cc: [email-masked]
Signed-off-by: Paul Gortmaker <[email-masked]>
---
 drivers/tty/serial/8250/8250.h |    7 -------
 1 files changed, 0 insertions(+), 7 deletions(-)

diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index f9719d1..ffd1e6e 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -119,13 +119,6 @@ static inline void serial_dl_write(struct uart_8250_port *up, int value)
  * is cleared, the machine locks up with endless interrupts.
  */
 #define ALPHA_KLUDGE_MCR  (UART_MCR_OUT2 | UART_MCR_OUT1)
-#elif defined(CONFIG_SBC8560)
-/*
- * WindRiver did something similarly broken on their SBC8560 board. The
- * UART tristates its IRQ output while OUT2 is clear, but they pulled
- * the interrupt line _up_ instead of down, so if we register the IRQ
- * while the UART is in that state, we die in an IRQ storm. */
-#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2)
 #else
 #define ALPHA_KLUDGE_MCR 0
 #endif
-- 
1.7.9.1