Subject: [RFC PATCH 4/6] ARM: dts: OMAP: Add phandle to bind PHY with USB controller

From: Kishon Vijay Abraham I <[email-masked]>
Date: Wed, 16 Jan 2013 20:31:00 +0530

Added a phandle in the dt node for usb_otg to bind the PHY with the USB
controller and also updated the documentation with the binding information.

Signed-off-by: Kishon Vijay Abraham I <[email-masked]>
---
I'll add this patch in this series "usb: musb: add driver for control module"
which contains the dt data to get MUSB working in dt boot in OMAP platforms.
 Documentation/devicetree/bindings/usb/omap-usb.txt |    2 ++
 arch/arm/boot/dts/omap3.dtsi                       |    1 +
 arch/arm/boot/dts/omap4.dtsi                       |    3 ++-
 arch/arm/boot/dts/twl4030.dtsi                     |    2 +-
 4 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt
index 3f0152b..591c4fc 100644
--- a/Documentation/devicetree/bindings/usb/omap-usb.txt
+++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
@@ -18,6 +18,7 @@ OMAP MUSB GLUE
    represents PERIPHERAL.
  - power : Should be "50". This signifies the controller can supply upto
    100mA when operating in host mode.
+ - usb_phy : the phandle for the PHY device
 
 SOC specific device node entry
 usb_otg_hs: usb_otg_hs@4a0ab000 {
@@ -27,6 +28,7 @@ usb_otg_hs: usb_otg_hs@4a0ab000 {
 	multipoint = <1>;
 	num_eps = <16>;
 	ram_bits = <12>;
+	usb_phy = <&phy>;
 };
 
 Board specific device node entry
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 8d03736..ebbf596 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -404,6 +404,7 @@
 			interrupts = <0 92 0x4>, <0 93 0x4>;
 			interrupt-names = "mc", "dma";
 			ti,hwmods = "usb_otg_hs";
+			usb_phy = <&phy>;
 			multipoint = <1>;
 			num_eps = <16>;
 			ram_bits = <12>;
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 5d770be..531cb2d 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -438,7 +438,7 @@
 			#size-cells = <1>;
 			ranges;
 			ti,hwmods = "ocp2scp_usb_phy";
-			usb2phy@4a0ad080 {
+			phy: usb2phy@4a0ad080 {
 				compatible = "ti,omap-usb2";
 				reg = <0x4a0ad080 0x58>;
 			};
@@ -540,6 +540,7 @@
 			interrupts = <0 92 0x4>, <0 93 0x4>;
 			interrupt-names = "mc", "dma";
 			ti,hwmods = "usb_otg_hs";
+			usb_phy = <&phy>;
 			multipoint = <1>;
 			num_eps = <16>;
 			ram_bits = <12>;
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
index ed0bc95..80f7c2b 100644
--- a/arch/arm/boot/dts/twl4030.dtsi
+++ b/arch/arm/boot/dts/twl4030.dtsi
@@ -67,7 +67,7 @@
 		#interrupt-cells = <1>;
 	};
 
-	twl4030-usb {
+	phy: twl4030-usb {
 		compatible = "ti,twl4030-usb";
 		interrupts = <10>, <4>;
 		usb1v5-supply = <&vusb1v5>;
-- 
1.7.9.5