Subject: Re: [PATCH 1/4 v2] powerpc/fsl-booke: Add device tree support for T1024/T1023 SoC

From: Scott Wood <[email-masked]>
Date: Wed, 8 Apr 2015 17:52:30 -0500

On Wed, 2015-04-08 at 18:46 +0800, Shengzhou Liu wrote:
> The T1024 SoC includes the following function and features:
> - Two 64-bit Power architecture e5500 cores, up to 1.4GHz
> - private 256KB L2 cache each core and shared 256KB CoreNet platform cache (CPC)
> - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support
> - Data Path Acceleration Architecture (DPAA) incorporating acceleration
> - Four MAC for 1G/2.5G/10G network interfaces (RGMII, SGMII, QSGMII, XFI)
> - High-speed peripheral interfaces
>   - Three PCI Express 2.0 controllers
> - Additional peripheral interfaces
>   - One SATA 2.0 controller
>   - Two USB 2.0 controllers with integrated PHY
>   - Enhanced secure digital host controller (SD/eSDHC/eMMC)
>   - Enhanced serial peripheral interface (eSPI)
>   - Four I2C controllers
>   - Four 2-pin UARTs or two 4-pin UARTs
>   - Integrated Flash Controller supporting NAND and NOR flash
> - Two 8-channel DMA engines
> - Multicore programmable interrupt controller (PIC)
> - LCD interface (DIU) with 12 bit dual data rate
> - QUICC Engine block supporting TDM, HDLC, and UART
[snip]
> +&soc {
> +/include/ "qoriq-tdm1.0.dtsi"

Where is this file?  Is there some dependency you've forgotten to
mention?

If this is meant to apply after
http://patchwork.ozlabs.org/patch/457605/
is that really QUICC engine TDM as described in the comment above?

-Scott