Subject: [PATCH 01/10] PCI: dwc: designware: Move the register defines to designware header file

From: Kishon Vijay Abraham I <[email-masked]>
Date: Wed, 15 Feb 2017 18:48:10 +0530

No functional change. Move the register defines and other macros from
pcie-designware.c to pcie-designware.h. This is in preparation to
split the pcie-designware.c file into designware core file and host
specific file.

While at that also fix a checkpatch warning.

Reviewed-By: Joao Pinto <[email-masked]>
Signed-off-by: Kishon Vijay Abraham I <[email-masked]>
---
 drivers/pci/dwc/pcie-designware.c |   70 ------------------------------------
 drivers/pci/dwc/pcie-designware.h |   71 +++++++++++++++++++++++++++++++++++++
 2 files changed, 71 insertions(+), 70 deletions(-)

diff --git a/drivers/pci/dwc/pcie-designware.c b/drivers/pci/dwc/pcie-designware.c
index af8f6e9..d0e4904 100644
--- a/drivers/pci/dwc/pcie-designware.c
+++ b/drivers/pci/dwc/pcie-designware.c
@@ -25,76 +25,6 @@
 
 #include "pcie-designware.h"
 
-/* Parameters for the waiting for link up routine */
-#define LINK_WAIT_MAX_RETRIES		10
-#define LINK_WAIT_USLEEP_MIN		90000
-#define LINK_WAIT_USLEEP_MAX		100000
-
-/* Parameters for the waiting for iATU enabled routine */
-#define LINK_WAIT_MAX_IATU_RETRIES	5
-#define LINK_WAIT_IATU_MIN		9000
-#define LINK_WAIT_IATU_MAX		10000
-
-/* Synopsys-specific PCIe configuration registers */
-#define PCIE_PORT_LINK_CONTROL		0x710
-#define PORT_LINK_MODE_MASK		(0x3f << 16)
-#define PORT_LINK_MODE_1_LANES		(0x1 << 16)
-#define PORT_LINK_MODE_2_LANES		(0x3 << 16)
-#define PORT_LINK_MODE_4_LANES		(0x7 << 16)
-#define PORT_LINK_MODE_8_LANES		(0xf << 16)
-
-#define PCIE_LINK_WIDTH_SPEED_CONTROL	0x80C
-#define PORT_LOGIC_SPEED_CHANGE		(0x1 << 17)
-#define PORT_LOGIC_LINK_WIDTH_MASK	(0x1f << 8)
-#define PORT_LOGIC_LINK_WIDTH_1_LANES	(0x1 << 8)
-#define PORT_LOGIC_LINK_WIDTH_2_LANES	(0x2 << 8)
-#define PORT_LOGIC_LINK_WIDTH_4_LANES	(0x4 << 8)
-#define PORT_LOGIC_LINK_WIDTH_8_LANES	(0x8 << 8)
-
-#define PCIE_MSI_ADDR_LO		0x820
-#define PCIE_MSI_ADDR_HI		0x824
-#define PCIE_MSI_INTR0_ENABLE		0x828
-#define PCIE_MSI_INTR0_MASK		0x82C
-#define PCIE_MSI_INTR0_STATUS		0x830
-
-#define PCIE_ATU_VIEWPORT		0x900
-#define PCIE_ATU_REGION_INBOUND		(0x1 << 31)
-#define PCIE_ATU_REGION_OUTBOUND	(0x0 << 31)
-#define PCIE_ATU_REGION_INDEX2		(0x2 << 0)
-#define PCIE_ATU_REGION_INDEX1		(0x1 << 0)
-#define PCIE_ATU_REGION_INDEX0		(0x0 << 0)
-#define PCIE_ATU_CR1			0x904
-#define PCIE_ATU_TYPE_MEM		(0x0 << 0)
-#define PCIE_ATU_TYPE_IO		(0x2 << 0)
-#define PCIE_ATU_TYPE_CFG0		(0x4 << 0)
-#define PCIE_ATU_TYPE_CFG1		(0x5 << 0)
-#define PCIE_ATU_CR2			0x908
-#define PCIE_ATU_ENABLE			(0x1 << 31)
-#define PCIE_ATU_BAR_MODE_ENABLE	(0x1 << 30)
-#define PCIE_ATU_LOWER_BASE		0x90C
-#define PCIE_ATU_UPPER_BASE		0x910
-#define PCIE_ATU_LIMIT			0x914
-#define PCIE_ATU_LOWER_TARGET		0x918
-#define PCIE_ATU_BUS(x)			(((x) & 0xff) << 24)
-#define PCIE_ATU_DEV(x)			(((x) & 0x1f) << 19)
-#define PCIE_ATU_FUNC(x)		(((x) & 0x7) << 16)
-#define PCIE_ATU_UPPER_TARGET		0x91C
-
-/*
- * iATU Unroll-specific register definitions
- * From 4.80 core version the address translation will be made by unroll
- */
-#define PCIE_ATU_UNR_REGION_CTRL1	0x00
-#define PCIE_ATU_UNR_REGION_CTRL2	0x04
-#define PCIE_ATU_UNR_LOWER_BASE		0x08
-#define PCIE_ATU_UNR_UPPER_BASE		0x0C
-#define PCIE_ATU_UNR_LIMIT		0x10
-#define PCIE_ATU_UNR_LOWER_TARGET	0x14
-#define PCIE_ATU_UNR_UPPER_TARGET	0x18
-
-/* Register address builder */
-#define PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(region)  ((0x3 << 20) | (region << 9))
-
 /* PCIe Port Logic registers */
 #define PLR_OFFSET			0x700
 #define PCIE_PHY_DEBUG_R1		(PLR_OFFSET + 0x2c)
diff --git a/drivers/pci/dwc/pcie-designware.h b/drivers/pci/dwc/pcie-designware.h
index a567ea2..b5226d4 100644
--- a/drivers/pci/dwc/pcie-designware.h
+++ b/drivers/pci/dwc/pcie-designware.h
@@ -14,6 +14,77 @@
 #ifndef _PCIE_DESIGNWARE_H
 #define _PCIE_DESIGNWARE_H
 
+/* Parameters for the waiting for link up routine */
+#define LINK_WAIT_MAX_RETRIES		10
+#define LINK_WAIT_USLEEP_MIN		90000
+#define LINK_WAIT_USLEEP_MAX		100000
+
+/* Parameters for the waiting for iATU enabled routine */
+#define LINK_WAIT_MAX_IATU_RETRIES	5
+#define LINK_WAIT_IATU_MIN		9000
+#define LINK_WAIT_IATU_MAX		10000
+
+/* Synopsys-specific PCIe configuration registers */
+#define PCIE_PORT_LINK_CONTROL		0x710
+#define PORT_LINK_MODE_MASK		(0x3f << 16)
+#define PORT_LINK_MODE_1_LANES		(0x1 << 16)
+#define PORT_LINK_MODE_2_LANES		(0x3 << 16)
+#define PORT_LINK_MODE_4_LANES		(0x7 << 16)
+#define PORT_LINK_MODE_8_LANES		(0xf << 16)
+
+#define PCIE_LINK_WIDTH_SPEED_CONTROL	0x80C
+#define PORT_LOGIC_SPEED_CHANGE		(0x1 << 17)
+#define PORT_LOGIC_LINK_WIDTH_MASK	(0x1f << 8)
+#define PORT_LOGIC_LINK_WIDTH_1_LANES	(0x1 << 8)
+#define PORT_LOGIC_LINK_WIDTH_2_LANES	(0x2 << 8)
+#define PORT_LOGIC_LINK_WIDTH_4_LANES	(0x4 << 8)
+#define PORT_LOGIC_LINK_WIDTH_8_LANES	(0x8 << 8)
+
+#define PCIE_MSI_ADDR_LO		0x820
+#define PCIE_MSI_ADDR_HI		0x824
+#define PCIE_MSI_INTR0_ENABLE		0x828
+#define PCIE_MSI_INTR0_MASK		0x82C
+#define PCIE_MSI_INTR0_STATUS		0x830
+
+#define PCIE_ATU_VIEWPORT		0x900
+#define PCIE_ATU_REGION_INBOUND		(0x1 << 31)
+#define PCIE_ATU_REGION_OUTBOUND	(0x0 << 31)
+#define PCIE_ATU_REGION_INDEX2		(0x2 << 0)
+#define PCIE_ATU_REGION_INDEX1		(0x1 << 0)
+#define PCIE_ATU_REGION_INDEX0		(0x0 << 0)
+#define PCIE_ATU_CR1			0x904
+#define PCIE_ATU_TYPE_MEM		(0x0 << 0)
+#define PCIE_ATU_TYPE_IO		(0x2 << 0)
+#define PCIE_ATU_TYPE_CFG0		(0x4 << 0)
+#define PCIE_ATU_TYPE_CFG1		(0x5 << 0)
+#define PCIE_ATU_CR2			0x908
+#define PCIE_ATU_ENABLE			(0x1 << 31)
+#define PCIE_ATU_BAR_MODE_ENABLE	(0x1 << 30)
+#define PCIE_ATU_LOWER_BASE		0x90C
+#define PCIE_ATU_UPPER_BASE		0x910
+#define PCIE_ATU_LIMIT			0x914
+#define PCIE_ATU_LOWER_TARGET		0x918
+#define PCIE_ATU_BUS(x)			(((x) & 0xff) << 24)
+#define PCIE_ATU_DEV(x)			(((x) & 0x1f) << 19)
+#define PCIE_ATU_FUNC(x)		(((x) & 0x7) << 16)
+#define PCIE_ATU_UPPER_TARGET		0x91C
+
+/*
+ * iATU Unroll-specific register definitions
+ * From 4.80 core version the address translation will be made by unroll
+ */
+#define PCIE_ATU_UNR_REGION_CTRL1	0x00
+#define PCIE_ATU_UNR_REGION_CTRL2	0x04
+#define PCIE_ATU_UNR_LOWER_BASE		0x08
+#define PCIE_ATU_UNR_UPPER_BASE		0x0C
+#define PCIE_ATU_UNR_LIMIT		0x10
+#define PCIE_ATU_UNR_LOWER_TARGET	0x14
+#define PCIE_ATU_UNR_UPPER_TARGET	0x18
+
+/* Register address builder */
+#define PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(region)	\
+			((0x3 << 20) | ((region) << 9))
+
 /*
  * Maximum number of MSI IRQs can be 256 per controller. But keep
  * it 32 as of now. Probably we will never need more than 32. If needed,
-- 
1.7.9.5