Subject: Re: Using DMA interrupt on MPC8313

From: jumpingProgrammer <[email-masked]>
Date: Mon, 23 Jun 2008 22:54:28 -0700 (PDT)

I use this in 8313erdb.dts, but can not find DMA info in
/proc/interrupts.why?

dma@8030 { 
			#address-cells = <1>; 
			#size-cells = <1>; 
			compatible = "fsl,elo-dma"; 
			cell-index = <0>; 
			reg = <8030 2d0>; /* DMA general status register */ 
			ranges = <0 8100 200>; 

			dma-channel@0 { 
				compatible = "fsl,elo-dma-channel"; 
				cell-index = <0>; 
				reg = <0 80>; 
				interrupt-parent = <700>; 
				interrupts = <47 8>; 
			}; 
			dma-channel@1 { 
				compatible = "fsl,elo-dma-channel"; 
				cell-index = <1>; 
				reg = <80 80>; 
				interrupt-parent = <700>; 
				interrupts = <47 8>; 
			}; 
			dma-channel@2 { 
				compatible = "fsl,elo-dma-channel"; 
				cell-index = <2>; 
				reg = <100 80>; 
				interrupt-parent = <700>; 
				interrupts = <47 8>; 
			}; 
			dma-channel@3 { 
				compatible = "fsl,elo-dma-channel"; 
				cell-index = <3>; 
				reg = <180 80>; 
				interrupt-parent = <700>; 
				interrupts = <47 8>; 
			};
		}

_______________________________________________
Linuxppc-dev mailing list
[email-masked]
https://ozlabs.org/mailman/listinfo/linuxppc-dev

-- 
View this message in context: http://www.nabble.com/Using-DMA-interrupt-on-MPC8313-tp17808164p18084260.html
Sent from the linuxppc-dev mailing list archive at Nabble.com.