From: Sylvain Munaut <tnt@246tNt•com>
To: Andrew Morton <akpm@osdl•org>
Cc: Sylvain Munaut <tnt@246tNt•com>,
ML linuxppc-embedded <linuxppc-embedded@ozlabs•org>
Subject: [PATCH 2/6] ppc32: Remove the OCP system from the Freescale MPC52xx support
Date: Sun, 27 Mar 2005 00:45:43 +0100 (CET) [thread overview]
Message-ID: <2.20050327_004704.tnt@patchsend.246tNt.com> (raw)
In-Reply-To: <0.20050327_004704.tnt@patchsend.246tNt.com>
ppc32: Remove the OCP system from the Freescale MPC52xx support
We remove all usage of the OCP system as preparation to switch
to the platform bus model / ppc_sys model.
This is only for 'generic' support, drivers are adapted separatly,
afterwards.
Signed-off-by: Sylvain Munaut <tnt@246tNt•com>
Signed-off-by: Kumar Gala <kumar.gala@freescale•com>
---
diff -Nru a/arch/ppc/Kconfig b/arch/ppc/Kconfig
--- a/arch/ppc/Kconfig 2005-03-26 19:56:03 +01:00
+++ b/arch/ppc/Kconfig 2005-03-26 19:56:03 +01:00
@@ -822,7 +822,7 @@
config FSL_OCP
bool
- depends on MPC10X_BRIDGE || PPC_MPC52xx
+ depends on MPC10X_BRIDGE
default y
config MPC10X_OPENPIC
diff -Nru a/arch/ppc/platforms/Makefile b/arch/ppc/platforms/Makefile
--- a/arch/ppc/platforms/Makefile 2005-03-26 19:56:03 +01:00
+++ b/arch/ppc/platforms/Makefile 2005-03-26 19:56:03 +01:00
@@ -45,7 +45,7 @@
obj-$(CONFIG_SANDPOINT) += sandpoint.o
obj-$(CONFIG_SBC82xx) += sbc82xx.o
obj-$(CONFIG_SPRUCE) += spruce.o
-obj-$(CONFIG_LITE5200) += lite5200.o mpc5200.o
+obj-$(CONFIG_LITE5200) += lite5200.o
ifeq ($(CONFIG_SMP),y)
obj-$(CONFIG_PPC_PMAC) += pmac_smp.o
diff -Nru a/arch/ppc/platforms/lite5200.c b/arch/ppc/platforms/lite5200.c
--- a/arch/ppc/platforms/lite5200.c 2005-03-26 19:56:03 +01:00
+++ b/arch/ppc/platforms/lite5200.c 2005-03-26 19:56:03 +01:00
@@ -13,7 +13,7 @@
* Dale Farnsworth <dale.farnsworth@mvista•com> and
* Wolfgang Denk <wd@denx•de>
*
- * Copyright 2004 Sylvain Munaut <tnt@246tNt•com>
+ * Copyright 2004-2005 Sylvain Munaut <tnt@246tNt•com>
* Copyright 2003 Motorola Inc.
* Copyright 2003 MontaVista Software Inc.
* Copyright 2003 DENX Software Engineering (wd@denx•de)
@@ -29,10 +29,10 @@
#include <linux/kdev_t.h>
#include <linux/root_dev.h>
#include <linux/console.h>
+#include <linux/module.h>
#include <asm/bootinfo.h>
#include <asm/io.h>
-#include <asm/ocp.h>
#include <asm/mpc52xx.h>
#include <syslib/mpc52xx_pci.h>
@@ -46,31 +46,6 @@
/* ======================================================================== */
-/* OCP device definition */
-/* For board/shared resources like PSCs */
-/* ======================================================================== */
-/* Be sure not to load conficting devices : e.g. loading the UART drivers for
- * PSC1 and then also loading a AC97 for this same PSC.
- * For details about how to create an entry, look in the doc of the concerned
- * driver ( eg drivers/serial/mpc52xx_uart.c for the PSC in uart mode )
- */
-
-static struct ocp_def board_ocp[] = {
- {
- .vendor = OCP_VENDOR_FREESCALE,
- .function = OCP_FUNC_PSC_UART,
- .index = 0,
- .paddr = MPC52xx_PSC1,
- .irq = MPC52xx_PSC1_IRQ,
- .pm = OCP_CPM_NA,
- },
- { /* Terminating entry */
- .vendor = OCP_VENDOR_INVALID
- }
-};
-
-
-/* ======================================================================== */
/* Platform specific code */
/* ======================================================================== */
@@ -131,9 +106,6 @@
static void __init
lite5200_setup_arch(void)
{
- /* Add board OCP definitions */
- mpc52xx_add_board_devices(board_ocp);
-
/* CPU & Port mux setup */
lite5200_setup_cpu();
diff -Nru a/arch/ppc/syslib/mpc52xx_setup.c b/arch/ppc/syslib/mpc52xx_setup.c
--- a/arch/ppc/syslib/mpc52xx_setup.c 2005-03-26 19:56:03 +01:00
+++ b/arch/ppc/syslib/mpc52xx_setup.c 2005-03-26 19:56:03 +01:00
@@ -23,7 +23,6 @@
#include <asm/time.h>
#include <asm/mpc52xx.h>
#include <asm/mpc52xx_psc.h>
-#include <asm/ocp.h>
#include <asm/pgtable.h>
#include <asm/ppcboot.h>
@@ -218,12 +217,3 @@
tb_ticks_per_jiffy = xlbfreq / HZ / divisor;
tb_to_us = mulhwu_scale_factor(xlbfreq / divisor, 1000000);
}
-
-
-void __init
-mpc52xx_add_board_devices(struct ocp_def board_ocp[]) {
- while (board_ocp->vendor != OCP_VENDOR_INVALID)
- if(ocp_add_one_device(board_ocp++))
- printk("mpc5200-ocp: Failed to add board device !\n");
-}
-
diff -Nru a/include/asm-ppc/mpc52xx.h b/include/asm-ppc/mpc52xx.h
--- a/include/asm-ppc/mpc52xx.h 2005-03-26 19:56:03 +01:00
+++ b/include/asm-ppc/mpc52xx.h 2005-03-26 19:56:03 +01:00
@@ -26,7 +26,6 @@
#include <asm/types.h>
struct pt_regs;
-struct ocp_def;
#endif /* __ASSEMBLY__ */
@@ -391,7 +390,6 @@
extern void mpc52xx_power_off(void);
extern void mpc52xx_progress(char *s, unsigned short hex);
extern void mpc52xx_calibrate_decr(void);
-extern void mpc52xx_add_board_devices(struct ocp_def board_ocp[]);
extern void mpc52xx_find_bridges(void);
next prev parent reply other threads:[~2005-03-26 23:48 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-26 23:44 [PATCH 0/6] Change MPC52xx to platform bus / ppc_sys model Sylvain Munaut
2005-03-26 23:45 ` [PATCH 1/6] ppc32: Remove unnecessary test in MPC52xx reset code Sylvain Munaut
2005-03-26 23:45 ` Sylvain Munaut [this message]
2005-03-26 23:46 ` [PATCH 3/6] ppc32: Change constants style in Freescale MPC52xx related code Sylvain Munaut
2005-03-26 23:46 ` [PATCH 4/6] ppc32: Use platform bus / ppc_sys model for Freescale MPC52xx Sylvain Munaut
2005-03-26 23:47 ` [PATCH 5/6] serial: Update mpc52xx_uart.c to use platform bus Sylvain Munaut
2005-03-26 23:47 ` [PATCH 6/6] ppc32: Adds necessary cpu init to use USB on LITE5200 Platform Sylvain Munaut
2005-03-27 13:45 ` [PATCH 0/6] Change MPC52xx to platform bus / ppc_sys model Andrey Volkov
2005-03-28 8:58 ` tnt
2005-04-01 20:02 ` [PATCH 1/1] Change MPC52xx-fec " Andrey Volkov
-- strict thread matches above, loose matches on Subject: below --
2005-03-21 23:06 [PATCH 0/6] [RFC] Change MPC52xx to " Sylvain Munaut
2005-03-21 23:07 ` [PATCH 2/6] ppc32: Remove the OCP system from the Freescale MPC52xx support Sylvain Munaut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2.20050327_004704.tnt@patchsend.246tNt.com \
--to=tnt@246tnt$(echo .)com \
--cc=akpm@osdl$(echo .)org \
--cc=linuxppc-embedded@ozlabs$(echo .)org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox