Subject: [PATCH] cpm_uart: Route SCC2 pins for the STx GP3 board

From: Matt Porter <[email-masked]>
Date: Wed, 1 Jun 2005 10:51:45 -0700

Adds SCC2 pin routing specific to the GP3 board.

Signed-off-by: Matt Porter <[email-masked]>
Signed-off-by: Kumar Gala <[email-masked]>

Index: drivers/serial/cpm_uart/cpm_uart_cpm2.c
===================================================================
--- b4bedd69e60ae8cc7d89f3c97c617a444eb43292/drivers/serial/cpm_uart/cpm_uart_cpm2.c  (mode:100644)
+++ uncommitted/drivers/serial/cpm_uart/cpm_uart_cpm2.c  (mode:100644)
@@ -134,12 +134,21 @@
 
 void scc2_lineif(struct uart_cpm_port *pinfo)
 {
+	/*
+	 * STx GP3 uses the SCC2 secondary option pin assignment
+	 * which this driver doesn't account for in the static
+	 * pin assignments. This kind of board specific info
+	 * really has to get out of the driver so boards can
+	 * be supported in a sane fashion.
+	 */
+#ifndef CONFIG_STX_GP3
 	volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
 	io->iop_pparb |= 0x008b0000;
 	io->iop_pdirb |= 0x00880000;
 	io->iop_psorb |= 0x00880000;
 	io->iop_pdirb &= ~0x00030000;
 	io->iop_psorb &= ~0x00030000;
+#endif
 	cpm2_immr->im_cpmux.cmx_scr &= 0xff00ffff;
 	cpm2_immr->im_cpmux.cmx_scr |= 0x00090000;
 	pinfo->brg = 2;