From: "KylongMu" <mqy@263•net.cn>
To: <wd@denx•de>
Cc: Linuxppc-embedded@ozlabs•org
Subject: 11-11-05 2.6.14 on AMCC Yosemite board(boot error)
Date: Fri, 11 Nov 2005 10:04:14 +0800 [thread overview]
Message-ID: <20051111020420.9644C1073@smtp.263.net> (raw)
In-Reply-To: <20051102164644.6D167353A2C@atlas.denx.de>
[-- Attachment #1: Type: text/plain, Size: 204 bytes --]
Dear Denk:
With today's update, I can make the kernel by Yosemite_defconfig,
but
When boot my board with this new kernel, it halt at boot time, the
attachment
Is the boot message.
Cordially,
Kylong Mu
[-- Attachment #2: bootmessage.txt --]
[-- Type: text/plain, Size: 5911 bytes --]
U-Boot 1.1.3 (Sep 7 2005 - 09:03:02)
IBM PowerPC 440 EP Rev. B
Board: AMCC YOSEMITE
VCO: 1066 MHz
CPU: 533 MHz
PLB: 133 MHz
OPB: 66 MHz
PER: 66 MHz
PCI: 66 MHz
I2C: ready
DRAM: 256 MB
FLASH: 32 MB
PCI: Bus Dev VenId DevId Class Int
In: serial
Out: serial
Err: serial
Net: ppc_440x_eth0, ppc_440x_eth1
Hit any key to stop autoboot: 0
=> tftp 0x400000 uImage
Waiting for PHY auto negotiation to complete.. done
Using ppc_440x_eth0 device
TFTP from server 192.168.0.93; our IP address is 192.168.0.66
Filename 'uImage'.
Load address: 0x400000
Loading: #################################################################
#################################################################
#################################################################
##########################################
done
Bytes transferred = 1212626 (1280d2 hex)
=> bootm 0x400000 0xfed40000
## Booting image at 00400000 ...
Image Name: Linux-2.6.14
Created: 2005-11-11 1:51:20 UTC
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 1212562 Bytes = 1.2 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at fed40000 ...
Image Name: Yosemite Ramdisk
Created: 2005-08-30 2:13:49 UTC
Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
Data Size: 17770706 Bytes = 16.9 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Ramdisk to 0ee9b000, end 0ff8d8d2 ... OK
Linux version 2.6.14 (root@dxp) (gcc version 4.0.0) #1 Fri Nov 11 09:51:04 CST 2005
AMCC PowerPC 440EP Yosemite Platform
Built 1 zonelists
Kernel command line: ramdisk=49152 root=/dev/ram ip=192.168.1.62:::::eth0:off
PID hash table entries: 2048 (order: 11, 32768 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 239488k available (1852k kernel code, 604k data, 136k init, 0k highmem)
Mount-cache hash table entries: 512
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
softlockup thread 0 started up.
Freeing initrd memory: 17354k freed
NET: Registered protocol family 16
PCI: Probing PCI hardware
usbcore: registered new driver usbfs
usbcore: registered new driver hub
SCSI subsystem initialized
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
usbmon: debugfs is not available
ppc-soc-ohci ppc-soc-ohci.0: USB Host Controller
ppc-soc-ohci ppc-soc-ohci.0: new USB bus registered, assigned bus number 1
ppc-soc-ohci ppc-soc-ohci.0: irq 40, io mem 0xef601000
usb usb1: Product: USB Host Controller
usb usb1: Manufacturer: Linux 2.6.14 ohci_hcd
usb usb1: SerialNumber: PPC-SOC USB
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
pegasus: v0.6.12 (2005/01/13), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new driver pegasus
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at MMIO 0x0 (irq = 0) is a 16550A
serial8250: ttyS1 at MMIO 0x0 (irq = 1) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 49152K size 1024 blocksize
PPC 4xx OCP EMAC driver, version 3.53
mal0: initialized, 4 TX channels, 2 RX channels
zmii0: bridge in RMII mode
eth0: emac0, MAC 00:10:ec:00:8f:aa
eth0: found Generic MII PHY (0x01)
eth1: emac1, MAC 00:10:ec:80:8f:aa
eth1: found Generic MII PHY (0x03)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Data machine check in kernel mode.
PLB0: BEAR=0x0000000000000000 ACR= 0x00000000 BESR= 0xfdfff7ff
POB0: BEAR=0xc27e3194ffffffff BESR0=0x00000000 BESR1=0x00000000
OPB0: BEAR=0x0000000000000151 BSTAT=0x00000000
Oops: machine check, sig: 7 [#1]
NIP: 00000000 LR: C0157E9C SP: CFFA1EE0 REGS: c0270f50 TRAP: 0202 Not tainted
MSR: 00000000 EE: 0 PR: 0 FP: 0 ME: 0 IR/DR: 00
TASK = cee98b10[1] 'swapper' THREAD: cffa0000
Last syscall: 120
GPR00: 00000002 CFFA1EE0 CEE98B10 C022673C 00000000 00000000 CFFA1F18 00000000
GPR08: 00000002 00000002 00000002 00000001 000F1FFF 60000428 0FFE6E00 00000001
GPR16: FFFFFFFF 007FFF00 0FFE1AD4 00000000 00000003 007FFE70 00800000 00000001
GPR24: C01D0000 C01D0000 C0270000 00000000 C022673C CFFA1F18 00000000 C022673C
NIP [00000000] 0x0
LR [c0157e9c] mtd_do_chip_probe+0xdc/0x334
Call trace:
[c0157e9c] mtd_do_chip_probe+0xdc/0x334
[c0152214] cfi_probe+0x18/0x28
[c0152160] do_map_probe+0x40/0xdc
[c0265568] init_yosemite_flash+0xb4/0x110
[c00013ac] init+0xb4/0x254
[c00046c0] kernel_thread+0x48/0x64
Data machine check in kernel mode.
PLB0: BEAR=0x0000000000000000 ACR= 0x00000000 BESR= 0xfdfff7ff
POB0: BEAR=0xc27e3194ffffffff BESR0=0x00000000 BESR1=0x00000000
OPB0: BEAR=0x0000000000000151 BSTAT=0x00000000
Oops: machine check, sig: 7 [#2]
NIP: 00000000 LR: C000235C SP: C0270E70 REGS: c0270f50 TRAP: 0202 Not tainted
MSR: 00000000 EE: 0 PR: 0 FP: 0 ME: 0 IR/DR: 00
TASK = cee98b10[1] 'swapper' THREAD: cffa0000
Last syscall: 120
GPR00: 08000000 C0270E70 CEE98B10 C0270E80 00001529 FFFFFFFF C0270000 00004000
GPR08: C0270000 C000235C 00021002 C00039E8 CEE98CD8 60000428 0FFE6E00 00000001
GPR16: FFFFFFFF 007FFF00 0FFE1AD4 00000000 00000003 007FFE70 00800000 00000001
GPR24: C01D0000 C01D0000 C0270000 00000000 C022673C CFFA1F18 00000007 C0270F50
NIP [00000000] 0x0
LR [c000235c] ret_from_except+0x0/0x18
Kernel panic - not syncing: Attempted to kill init!
<0>Rebooting in 180 seconds..
next prev parent reply other threads:[~2005-11-11 2:04 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-07-11 13:38 Linux 2.4.25 / MPC8280 / ram config vs Linux instability? Absolut Hunter
2005-07-11 14:01 ` Michael Richardson
2005-07-11 14:03 ` Mark Chambers
2005-07-11 14:22 ` Wolfgang Denk
2005-11-02 13:49 ` About 2.6.14 on AMCC Yosemite board KylongMu
2005-11-02 16:46 ` Wolfgang Denk
2005-11-06 15:55 ` Today's 2.6.14 can't finish build with yosemite-defconfig KylongMu
2005-11-11 2:04 ` KylongMu [this message]
2005-11-11 8:39 ` 11-11-05 2.6.14 on AMCC Yosemite board(boot error) Wolfgang Denk
2005-11-12 16:47 ` KylongMu
2005-11-12 18:01 ` Problem solved: " KylongMu
2005-11-12 23:32 ` Wolfgang Denk
2005-11-12 23:30 ` Wolfgang Denk
2005-07-11 18:39 ` Linux 2.4.25 / MPC8280 / ram config vs Linux instability? Dan Malek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20051111020420.9644C1073@smtp.263.net \
--to=mqy@263$(echo .)net.cn \
--cc=Linuxppc-embedded@ozlabs$(echo .)org \
--cc=wd@denx$(echo .)de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox