From: Benedikt Wildenhain <benedikt@benedikt-wildenhain•de>
To: linuxppc-embedded@ozlabs•org
Subject: Running Linux on Avnet's FX12 Evaluation Board
Date: Thu, 28 Sep 2006 18:06:26 +0200 [thread overview]
Message-ID: <20060928160624.GA13955@horos> (raw)
[-- Attachment #1: Type: text/plain, Size: 3200 bytes --]
Hello,
I am trying to run a Linuxppc 2.4 kernel (20051021) on an IBM Powerpc
405, I have compiled it according to the instructions on
http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux/uclinux_powerpc/#linuxppc-2,
I load it into the ram using the Xilinx Microprocessor Debug (XMD)
Engine and try to run it, but it seems to have some trouble with the
memory:
Linux/PPC load:
Uncompressing Linux...done.
Now booting the kernel
Linux version 2.4.30-pre1 (benedikt@horos) (gcc version 3.4.1) #41 ĵa�- Sep 28 01:03:33 CEST 2006
Xilinx Virtex-II Pro port (C) 2002 MontaVista Software, Inc. (source@mvista•com)
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line:
Xilinx INTC #0 at 0x41200000 mapped to 0xFDFFF000
Calibrating delay loop... 598.01 BogoMIPS
Memory: 30968k <4>Oops: kernel access of bad area, sig: 11
NIP: FFFFFFFC XER: 20000010 LR: FFFFFFFE SP: C0126580 REGS: c01264d0 TRAP: 0400 Not tainted
MSR: 00001030 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c01248d0[0] 'swapper' Last syscall: 0
last math 00000000 last altivec 00000000
GPR00: FFFFFFFE C0126580 C01248D0 C01248D0 00000000 00000001 C01249D0 00000048
GPR08: 00000048 00000000 00000000 00000017 C0140000 FFFFFFFF FFFFFFFF FFFFFFFF
GPR16: FFFFFFFF FFFFFFFF FFFFFFFF C012770C 00001032 00126600 C0000000 C013E1D0
GPR24: C013E8CC C0140000 C012770C C0140000 000001E6 00000001 00000000 C01248D0
Call backtrace:
FFFFFFFE C001D664 C00044F4 C0002C80 00000000 C009582C C00958B4
C00138F0 C0013B94 C0013DDC C0136374 C0134374 C0002328
Kernel panic: Aiee, killing interrupt handler!
In interrupt handler - not syncing
<0>Rebooting in 180 seconds..
loaded at: 00400000 004F01E0
board data at: 004ED138 004ED150
relocated to: 00405310 00405328
zimage at: 004058D5 004EC21E
avail ram: 004F1000 02000000
Do I have to set any memory positions or something like that manually?
I also tried to compile the Kernel with XMON support, but this also
failed:
/space/benedikt/crosstool/gcc-3.4.1-glibc-2.3.3/powerpc-405-linux-gnu/bin/powerpc-405-linux-gnu-ld -T arch/ppc/vmlinux.lds -Ttext 0xc0000000 -Bstatic arch/ppc/kernel/head_4xx.o init/main.o init/version.o init/do_mounts.o \
--start-group \
arch/ppc/kernel/kernel.o arch/ppc/platforms/platform.o arch/ppc/mm/mm.o arch/ppc/lib/lib.o kernel/kernel.o mm/mm.o fs/fs.o ipc/ipc.o arch/ppc/math-emu/math-emu.o arch/ppc/xmon/x.o \
drivers/char/char.o drivers/block/block.o drivers/misc/misc.o drivers/net/net.o drivers/mtd/mtdlink.o drivers/macintosh/macintosh.o drivers/media/media.o \
net/network.o \
/space/benedikt/tfc/uclinux/linuxppc-2.4/lib/lib.a \
--end-group \
-o vmlinux
arch/ppc/xmon/x.o(.text+0x64): In function `xmon_map_scc':
/space/benedikt/tfc/uclinux/linuxppc-2.4/arch/ppc/xmon/start.c:218: undefined reference to `__sysrq_put_key_op'
make: *** [vmlinux] Error 1
--
GPG-Key 1024D/E32C4F4B | www.gnupg.org | http://enigmail.mozdev.org
Fingerprint = 9C03 86B5 CA59 F7A3 D976 AD2C 02D6 ED21 E32C 4F4B
Mit freundlichen Gruessen | Kun afablaj salutoj (www.esperanto.org)
May the tux be with you. :wq 73
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
next reply other threads:[~2006-09-28 16:49 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-09-28 16:06 Benedikt Wildenhain [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-09-29 8:17 Running Linux on Avnet's FX12 Evaluation Board Jaap de Jong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060928160624.GA13955@horos \
--to=benedikt@benedikt-wildenhain$(echo .)de \
--cc=linuxppc-embedded@ozlabs$(echo .)org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox