From: "Mark A. Greer" <mgreer@mvista•com>
To: Paul Mackerras <paulus@samba•org>
Cc: linuxppc-dev <Linuxppc-dev@ozlabs•org>
Subject: [PATCH 4/13] powerpc: Add bootwrapper support for Marvell/mv64x60 I2C
Date: Fri, 11 May 2007 17:54:53 -0700 [thread overview]
Message-ID: <20070512005453.GD3365@mag.az.mvista.com> (raw)
In-Reply-To: <20070512004605.GA2808@mag.az.mvista.com>
Some platforms support a variety processor modules with no method of
determining which exact processor module is being used except by
examining Vital Product Data (VPD). The modules may have different
amounts of memory, clock frequencies, etc. so reading the VPD becomes
necessary to correctly set properties in the device tree before its
passed to the kernel.
Often the VPD is stored in I2C EEPROMs so an I2C driver becomes necessary.
This I2C driver is for the I2C controller that's embedded on the Marvel
mv64x60 line of host bridges.
Signed-off-by: Mark A. Greer <mgreer@mvista•com>
---
arch/powerpc/boot/Makefile | 2
arch/powerpc/boot/mv64x60_i2c.c | 206 ++++++++++++++++++++++++++++++
2 files changed, 207 insertions(+), 1 deletion(-)
Index: powerpc/arch/powerpc/boot/mv64x60_i2c.c
===================================================================
--- /dev/null
+++ powerpc/arch/powerpc/boot/mv64x60_i2c.c
@@ -0,0 +1,206 @@
+/*
+ * Bootloader version of the i2c driver for the MV64x60.
+ *
+ * Author: Dale Farnsworth <dfarnsworth@mvista•com>
+ * Maintained by: Mark A. Greer <mgreer@mvista•com>
+ *
+ * 2003, 2007 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express or
+ * implied.
+ */
+
+#include <stdarg.h>
+#include <stddef.h>
+#include "types.h"
+#include "elf.h"
+#include "page.h"
+#include "string.h"
+#include "stdio.h"
+#include "io.h"
+#include "ops.h"
+#include "mv64x60.h"
+
+extern void udelay(long);
+
+/* Register defines */
+#define MV64x60_I2C_REG_SLAVE_ADDR 0x00
+#define MV64x60_I2C_REG_DATA 0x04
+#define MV64x60_I2C_REG_CONTROL 0x08
+#define MV64x60_I2C_REG_STATUS 0x0c
+#define MV64x60_I2C_REG_BAUD 0x0c
+#define MV64x60_I2C_REG_EXT_SLAVE_ADDR 0x10
+#define MV64x60_I2C_REG_SOFT_RESET 0x1c
+
+#define MV64x60_I2C_CONTROL_ACK 0x04
+#define MV64x60_I2C_CONTROL_IFLG 0x08
+#define MV64x60_I2C_CONTROL_STOP 0x10
+#define MV64x60_I2C_CONTROL_START 0x20
+#define MV64x60_I2C_CONTROL_TWSIEN 0x40
+#define MV64x60_I2C_CONTROL_INTEN 0x80
+
+#define MV64x60_I2C_STATUS_BUS_ERR 0x00
+#define MV64x60_I2C_STATUS_MAST_START 0x08
+#define MV64x60_I2C_STATUS_MAST_REPEAT_START 0x10
+#define MV64x60_I2C_STATUS_MAST_WR_ADDR_ACK 0x18
+#define MV64x60_I2C_STATUS_MAST_WR_ADDR_NO_ACK 0x20
+#define MV64x60_I2C_STATUS_MAST_WR_ACK 0x28
+#define MV64x60_I2C_STATUS_MAST_WR_NO_ACK 0x30
+#define MV64x60_I2C_STATUS_MAST_LOST_ARB 0x38
+#define MV64x60_I2C_STATUS_MAST_RD_ADDR_ACK 0x40
+#define MV64x60_I2C_STATUS_MAST_RD_ADDR_NO_ACK 0x48
+#define MV64x60_I2C_STATUS_MAST_RD_DATA_ACK 0x50
+#define MV64x60_I2C_STATUS_MAST_RD_DATA_NO_ACK 0x58
+#define MV64x60_I2C_STATUS_MAST_WR_ADDR_2_ACK 0xd0
+#define MV64x60_I2C_STATUS_MAST_WR_ADDR_2_NO_ACK 0xd8
+#define MV64x60_I2C_STATUS_MAST_RD_ADDR_2_ACK 0xe0
+#define MV64x60_I2C_STATUS_MAST_RD_ADDR_2_NO_ACK 0xe8
+#define MV64x60_I2C_STATUS_NO_STATUS 0xf8
+
+static u8 *ctlr_base;
+
+static int mv64x60_i2c_wait_for_status(int wanted)
+{
+ int i;
+ int status;
+
+ for (i=0; i<1000; i++) {
+ udelay(10);
+ status = in_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_STATUS))
+ & 0xff;
+ if (status == wanted)
+ return status;
+ }
+ return -status;
+}
+
+static int mv64x60_i2c_control(int control, int status)
+{
+ out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_CONTROL), control & 0xff);
+ return mv64x60_i2c_wait_for_status(status);
+}
+
+static int mv64x60_i2c_read_byte(int control, int status)
+{
+ out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_CONTROL), control & 0xff);
+ if (mv64x60_i2c_wait_for_status(status) < 0)
+ return -1;
+ return in_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_DATA)) & 0xff;
+}
+
+static int mv64x60_i2c_write_byte(int data, int control, int status)
+{
+ out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_DATA), data & 0xff);
+ out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_CONTROL), control & 0xff);
+ return mv64x60_i2c_wait_for_status(status);
+}
+
+int mv64x60_i2c_read(u32 devaddr, u8 *buf, u32 offset, u32 offset_size,
+ u32 count)
+{
+ int i;
+ int data;
+ int control;
+ int status;
+
+ if (ctlr_base == NULL)
+ return -1;
+
+ /* send reset */
+ out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_SOFT_RESET), 0);
+ out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_SLAVE_ADDR), 0);
+ out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_EXT_SLAVE_ADDR), 0);
+ out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_BAUD), (4 << 3) | 0x4);
+
+ if (mv64x60_i2c_control(MV64x60_I2C_CONTROL_TWSIEN,
+ MV64x60_I2C_STATUS_NO_STATUS) < 0)
+ return -1;
+
+ /* send start */
+ control = MV64x60_I2C_CONTROL_START | MV64x60_I2C_CONTROL_TWSIEN;
+ status = MV64x60_I2C_STATUS_MAST_START;
+ if (mv64x60_i2c_control(control, status) < 0)
+ return -1;
+
+ /* select device for writing */
+ data = devaddr & ~0x1;
+ control = MV64x60_I2C_CONTROL_TWSIEN;
+ status = MV64x60_I2C_STATUS_MAST_WR_ADDR_ACK;
+ if (mv64x60_i2c_write_byte(data, control, status) < 0)
+ return -1;
+
+ /* send offset of data */
+ control = MV64x60_I2C_CONTROL_TWSIEN;
+ status = MV64x60_I2C_STATUS_MAST_WR_ACK;
+ if (offset_size > 1) {
+ if (mv64x60_i2c_write_byte(offset >> 8, control, status) < 0)
+ return -1;
+ }
+ if (mv64x60_i2c_write_byte(offset, control, status) < 0)
+ return -1;
+
+ /* resend start */
+ control = MV64x60_I2C_CONTROL_START | MV64x60_I2C_CONTROL_TWSIEN;
+ status = MV64x60_I2C_STATUS_MAST_REPEAT_START;
+ if (mv64x60_i2c_control(control, status) < 0)
+ return -1;
+
+ /* select device for reading */
+ data = devaddr | 0x1;
+ control = MV64x60_I2C_CONTROL_TWSIEN;
+ status = MV64x60_I2C_STATUS_MAST_RD_ADDR_ACK;
+ if (mv64x60_i2c_write_byte(data, control, status) < 0)
+ return -1;
+
+ /* read all but last byte of data */
+ control = MV64x60_I2C_CONTROL_ACK | MV64x60_I2C_CONTROL_TWSIEN;
+ status = MV64x60_I2C_STATUS_MAST_RD_DATA_ACK;
+
+ for (i=1; i<count; i++) {
+ data = mv64x60_i2c_read_byte(control, status);
+ if (data < 0) {
+ printf("errors on iteration %d\n", i);
+ return -1;
+ }
+ *buf++ = data;
+ }
+
+ /* read last byte of data */
+ control = MV64x60_I2C_CONTROL_TWSIEN;
+ status = MV64x60_I2C_STATUS_MAST_RD_DATA_NO_ACK;
+ data = mv64x60_i2c_read_byte(control, status);
+ if (data < 0)
+ return -1;
+ *buf++ = data;
+
+ /* send stop */
+ control = MV64x60_I2C_CONTROL_STOP | MV64x60_I2C_CONTROL_TWSIEN;
+ status = MV64x60_I2C_STATUS_NO_STATUS;
+ if (mv64x60_i2c_control(control, status) < 0)
+ return -1;
+
+ return count;
+}
+
+int mv64x60_i2c_open(void)
+{
+ u32 v;
+ void *devp;
+
+ devp = finddevice("/mv64x60/i2c");
+ if (devp == NULL)
+ goto err_out;
+ if (getprop(devp, "virtual-reg", &v, sizeof(v)) != sizeof(v))
+ goto err_out;
+
+ ctlr_base = (u8 *)v;
+ return 0;
+
+err_out:
+ return -1;
+}
+
+void mv64x60_i2c_close(void)
+{
+ ctlr_base = NULL;
+}
Index: powerpc/arch/powerpc/boot/Makefile
===================================================================
--- powerpc.orig/arch/powerpc/boot/Makefile
+++ powerpc/arch/powerpc/boot/Makefile
@@ -43,7 +43,7 @@ $(addprefix $(obj)/,$(zlib) gunzip_util.
src-wlib := string.S crt0.S stdio.c main.c flatdevtree.c flatdevtree_misc.c \
ns16550.c serial.c simple_alloc.c div64.S util.S \
gunzip_util.c elf_util.c $(zlib) devtree.c \
- 44x.c ebony.c mv64x60.c mpsc.c
+ 44x.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c
src-plat := of.c cuboot-83xx.c cuboot-85xx.c holly.c \
cuboot-ebony.c treeboot-ebony.c
src-boot := $(src-wlib) $(src-plat) empty.c
next prev parent reply other threads:[~2007-05-12 0:54 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-12 0:46 [PATCH 0/13] powerpc: Add support for Marvell/mv64x60 and prpmc2800 Mark A. Greer
2007-05-12 0:53 ` [PATCH 1/13] powerpc: Add Makefile rules to wrap dts file in zImage Mark A. Greer
2007-05-14 0:33 ` David Gibson
2007-05-14 3:46 ` Mark A. Greer
2007-05-14 3:49 ` David Gibson
2007-05-21 18:10 ` Mark A. Greer
2007-05-22 0:23 ` David Gibson
2007-05-24 21:28 ` Mark A. Greer
2007-05-25 1:32 ` David Gibson
2007-05-25 1:33 ` David Gibson
2007-05-25 20:50 ` Mark A. Greer
2007-05-28 4:43 ` David Gibson
2007-05-12 0:54 ` [PATCH 2/13] powerpc: Add bootwrapper support for Marvell/mv64x60 hostbridge Mark A. Greer
2007-05-12 0:54 ` [PATCH 3/13] powerpc: Add bootwrapper support for Marvell MPSC Mark A. Greer
2007-05-12 0:54 ` Mark A. Greer [this message]
2007-05-12 0:55 ` [PATCH 5/13] powerpc: Add interrupt support for Marvell mv64x60 chips Mark A. Greer
2007-05-12 0:55 ` [PATCH 6/13] powerpc: Create Marvell mv64x60 MPSC (serial) platform_data Mark A. Greer
2007-05-12 0:56 ` [PATCH 7/13] powerpc: Create Marvell mv64x60 ethernet platform_data Mark A. Greer
2007-05-12 0:56 ` [PATCH 8/13] powerpc: Create Marvell mv64x60 I2C platform_data Mark A. Greer
2007-05-12 0:57 ` [PATCH 9/13] powerpc: Add Marvell mv64x60 PCI bridge support Mark A. Greer
2007-05-12 0:57 ` [PATCH 10/13] powerpc: check cache coherency of kernel vs firmware Mark A. Greer
2007-05-14 0:40 ` David Gibson
2007-05-14 12:34 ` Segher Boessenkool
2007-05-14 14:44 ` Dale Farnsworth
2007-05-14 20:27 ` Mark A. Greer
2007-05-12 0:57 ` [PATCH 11/13] powerpc: Add DTS file for the Motorola PrPMC2800 platform Mark A. Greer
2007-05-12 0:58 ` [PATCH 12/13] powerpc: Add bootwrapper support for " Mark A. Greer
2007-05-12 0:58 ` [PATCH 13/13] powerpc: Add arch/powerpc support for the Motorola PrPMC2800 Mark A. Greer
-- strict thread matches above, loose matches on Subject: below --
2007-05-10 20:02 [PATCH 0/13] powerpc: Add support for Marvell/mv64x60 and prpmc2800 Mark A. Greer
2007-05-10 20:06 ` [PATCH 4/13] powerpc: Add bootwrapper support for Marvell/mv64x60 I2C Mark A. Greer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070512005453.GD3365@mag.az.mvista.com \
--to=mgreer@mvista$(echo .)com \
--cc=Linuxppc-dev@ozlabs$(echo .)org \
--cc=paulus@samba$(echo .)org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox