^_^=>bootm 300000

 

## Booting image at 00300000 ...
   Image Name:   Linux-2.6.20.14
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    839246 Bytes = 819.6 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
## Current stack ends at 0x01D5DB10 => set upper limit to 0x00800000
No initrd
## Transferring control to Linux (at address 00000000) ...
bootm1
Linux version 2.6.20.14 (root@localhost.localdomain) (gcc version 4.0.0 (DENX ELDK 4.0 4.0.0)) #2 Thu Aug 9 23:26:51 CST 2007
I2C/SPI/SMC1 microcode patch installed.
Zone PFN ranges:
  DMA             0 ->     2048
  Normal       2048 ->     2048
early_node_map[1] active PFN ranges
    0:        0 ->     2048
Built 1 zonelists.  Total pages: 2032
Kernel command line:
PID hash table entries: 32 (order: 5, 128 bytes)
Decrementer Frequency = 187500000/60
Warning: real time clock seems stuck!
cpm_uart: console: compat mode
Dentry cache hash table entries: 1024 (order: 0, 4096 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Memory: 6164k available (1252k kernel code, 604k data, 84k init, 0k highmem)
Mount-cache hash table entries: 512
Zq001: start_kernel
------------[ cut here ]------------
Badness at arch/ppc/kernel/dma-mapping.c:345
Call Trace:
[00213E60] [00008BA0]  (unreliable)
[00213E90] [000A1370]
[00213EA0] [0000388C]
[00213ED0] [0000304C]
[00213F90] [001A29B4]
[00213FA0] [000022B0]
[00213FF0] [00004A80]
NET: Registered protocol family 16
Generic PHY: Registered new driver
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 256 (order: 0, 4096 bytes)
TCP bind hash table entries: 128 (order: -1, 2560 bytes)
TCP: Hash tables configured (established 256 bind 128)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(4294836223.218:1): initialized
audit: cannot initialize inotify handle
io scheduler noop registered (default)
Serial: CPM driver $Revision: 0.02 $
cpm_uart: WARNING: no UART devices found on platform bus!
cpm_uart: the driver will guess configuration, but this mode is no longer supported.
ttyCPM0 at MMIO 0xff000a80 (irq = 20) is a CPM UART
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
LXT970: Registered new driver
LXT971: Registered new driver
fs_enet.c:v1.0 (Aug 8, 2005)
------------[ cut here ]------------
kernel BUG at arch/ppc/kernel/dma-mapping.c:233!
Oops: Exception in kernel mode, sig: 5 [#1]
NIP: 00005584 LR: 00005538 CTR: 00000000
REGS: 00213e90 TRAP: 0700   Not tainted  (2.6.20.14)
MSR: 00029032 <EE,ME,IR,DR>  CR: 55222253  XER: A000247F
TASK = 00210ba0[1] 'swapper' THREAD: 00212000
GPR00: 00400165 00213F40 00210BA0 001EDD64 00000000 00000BDA 00269FFC 00000000
GPR08: 00160648 00000001 00401000 00400164 00000000 41082001 02000000 00000001
GPR16: 00000000 01FFFA54 FFFFFFFF 00000000 00800000 007FFF00 01FFAA14 00213F78
GPR24: 005FF000 00160000 00000000 001EDD40 00001000 001E6000 00231220 001EDD20
Call Trace:
[00213F40] [00005508]  (unreliable)
[00213F70] [001A3578]
[00213FA0] [000022B0]
[00213FF0] [00004A80]
Instruction dump:
38630658 4813226d 7fc3f378 48050eb5 7fe3fb78 7f44d378 48041b35 48000078
801d0000 5400066e 3160ffff 7d2b0110 <0f090000> 38000400 7d20f828 7d290378
Kernel panic - not syncing: Attempted to kill init!
 <0>Rebooting in 180 seconds..