From: Olof Johansson <olof@lixom•net>
To: paulus@samba•org
Cc: linuxppc-dev@ozlabs•org
Subject: [PATCH] pasemi: process i2c device tree entries at boot
Date: Sun, 14 Oct 2007 20:52:32 -0500 [thread overview]
Message-ID: <20071015015232.GA4641@lixom.net> (raw)
Setup i2c_board_info based on device tree contents. This has to be
a device_initcall since we need PCI to be probed by the time we
run it, but before the actual driver is initialized.
Signed-off-by: Olof Johansson <olof@lixom•net>
Index: k.org/arch/powerpc/platforms/pasemi/Makefile
===================================================================
--- k.org.orig/arch/powerpc/platforms/pasemi/Makefile
+++ k.org/arch/powerpc/platforms/pasemi/Makefile
@@ -1,4 +1,4 @@
-obj-y += setup.o pci.o time.o idle.o powersave.o iommu.o
+obj-y += setup.o pci.o time.o idle.o powersave.o iommu.o misc.o
obj-$(CONFIG_PPC_PASEMI_MDIO) += gpio_mdio.o
obj-$(CONFIG_ELECTRA_IDE) += electra_ide.o
obj-$(CONFIG_PPC_PASEMI_CPUFREQ) += cpufreq.o
Index: k.org/arch/powerpc/platforms/pasemi/misc.c
===================================================================
--- /dev/null
+++ k.org/arch/powerpc/platforms/pasemi/misc.c
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2007 PA Semi, Inc
+ *
+ * Parts based on arch/powerpc/sysdev/fsl_soc.c:
+ *
+ * 2006 (c) MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/of.h>
+#include <linux/i2c.h>
+
+#ifdef CONFIG_I2C_BOARDINFO
+/* The below is from fsl_soc.c. It's copied because since there are no
+ * official bus bindings at this time it doesn't make sense to share across
+ * the platforms, even though they happen to be common.
+ */
+struct i2c_driver_device {
+ char *of_device;
+ char *i2c_driver;
+ char *i2c_type;
+};
+
+static struct i2c_driver_device i2c_devices[] __initdata = {
+ {"dallas,ds1338", "rtc-ds1307", "ds1338"},
+};
+
+static int __init find_i2c_driver(struct device_node *node,
+ struct i2c_board_info *info)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(i2c_devices); i++) {
+ if (!of_device_is_compatible(node, i2c_devices[i].of_device))
+ continue;
+ if (strlcpy(info->driver_name, i2c_devices[i].i2c_driver,
+ KOBJ_NAME_LEN) >= KOBJ_NAME_LEN ||
+ strlcpy(info->type, i2c_devices[i].i2c_type,
+ I2C_NAME_SIZE) >= I2C_NAME_SIZE)
+ return -ENOMEM;
+ return 0;
+ }
+ return -ENODEV;
+}
+
+static int __init pasemi_register_i2c_devices(void)
+{
+ struct pci_dev *pdev;
+ struct device_node *adap_node;
+ struct device_node *node;
+
+ pdev = NULL;
+ while ((pdev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa003, pdev))) {
+ adap_node = pci_device_to_OF_node(pdev);
+
+ node = NULL;
+ while ((node = of_get_next_child(adap_node, node))) {
+ struct i2c_board_info info = {};
+ const u32 *addr;
+ int len;
+
+ addr = of_get_property(node, "reg", &len);
+ if (!addr || len < sizeof(int) ||
+ *addr > (1 << 10) - 1) {
+ printk(KERN_WARNING
+ "pasemi_register_i2c_devices: "
+ "invalid i2c device entry\n");
+ continue;
+ }
+
+ info.irq = irq_of_parse_and_map(node, 0);
+ if (info.irq == NO_IRQ)
+ info.irq = -1;
+
+ if (find_i2c_driver(node, &info) < 0)
+ continue;
+
+ info.addr = *addr;
+
+ i2c_register_board_info(PCI_FUNC(pdev->devfn), &info,
+ 1);
+ }
+ }
+ return 0;
+}
+device_initcall(pasemi_register_i2c_devices);
+#endif
next reply other threads:[~2007-10-15 1:46 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-15 1:52 Olof Johansson [this message]
2007-10-15 22:49 ` [PATCH v2] pasemi: process i2c device tree entries at boot Olof Johansson
2007-10-15 22:54 ` Scott Wood
2007-10-16 0:17 ` Olof Johansson
2007-10-16 16:21 ` Scott Wood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071015015232.GA4641@lixom.net \
--to=olof@lixom$(echo .)net \
--cc=linuxppc-dev@ozlabs$(echo .)org \
--cc=paulus@samba$(echo .)org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox