RE: Linux boot on a ppc 405

From: "Stephen Neuendorffer" <stephen.neuendorffer@xilinx•com>
To: "Ricardo Ayres Severo" <severo.ricardo@gmail•com>
Cc: linuxppc-embedded@ozlabs•org
Subject: RE: Linux boot on a ppc 405
Date: Mon, 28 Jan 2008 15:02:25 -0800	[thread overview]
Message-ID: <20080128230225.C06015A805B@mail217-sin.bigfish.com> (raw)
In-Reply-To: <5ee408090801281500q467fe03anf00a5a31a5473846@mail.gmail.com>

I've you've reset the processor, then the MMU has been reset too, in
which case your
log_buf will most likely be at 1e0cc4.  The 'trick' is that resetting
the processor
leaves the memory intact.

Steve

> -----Original Message-----
> From: Ricardo Ayres Severo [mailto:severo.ricardo@gmail•com]
> Sent: Monday, January 28, 2008 3:00 PM
> To: Stephen Neuendorffer
> Cc: linuxppc-embedded@ozlabs•org
> Subject: Re: Linux boot on a ppc 405
>=20
> Steve,
>=20
> I tried that, but the System.map is not the real memory address, it's
> processed by the mmu isn't it?
>=20
> This is my System.map: c01e0cc4 b __log_buf
> when I try to look at the position 0xc01e0cc4 the debugger returns:
> Error: Cannot access memory at address 0xc01e0cc4
>=20
> Am I doing something wrong?
>=20
> Thanks,
>=20
> On Jan 28, 2008 8:55 PM, Stephen Neuendorffer
> <stephen.neuendorffer@xilinx•com> wrote:
> >
> > You have to look at the System.map file, find the __log_buf symbol,
and
> > then look at the address manually.
> >
> > Steve
> >
> >
> > > -----Original Message-----
> > > From:
linuxppc-embedded-bounces+stephen=3Dneuendorffer.name@ozlabs•org
> > [mailto:linuxppc-embedded-
> > > bounces+stephen=3Dneuendorffer.name@ozlabs•org] On Behalf Of =
Ricardo
> > Ayres Severo
> > > Sent: Monday, January 28, 2008 2:53 PM
> > > Cc: linuxppc-embedded@ozlabs•org
> > > Subject: Re: Linux boot on a ppc 405
> > >
> > > Grant,
> > >
> > > my output is the following:
> > >
> > > loaded at:     00400000 004E919C
> > >
> > > board data at: 00000000 0000007C
> > >
> > > relocated to:  00404040 004040BC
> > >
> > > zimage at:     00404E2C 004E620A
> > >
> > > avail ram:     004EA000 8DA05119
> > >
> > >
> > > Linux/PPC load: console=3DttyUL0,9600
> > >
> > > Uncompressing Linux...done.
> > >
> > > Now booting the kernel
> > >
> > >
> > >
> > > nothing shows up next.
> > > I tried to look at __log_buf but the debugger doesn't recognize
it.
> > > The debugger only knows the code of the part that boots the
kernel.
> > > I also tried setting ttyUL0 and ttyS0 for the linux console.
> > > Any ideas of how I can get the real position of __log_buf?
> > >
> > > Thanks,
> > >
> > > On Jan 27, 2008 7:15 PM, Grant Likely <grant.likely@secretlab•ca>
> > wrote:
> > > > On 1/27/08, Ricardo Severo <severo.ricardo@gmail•com> wrote:
> > > > > Hi all,
> > > > >
> > > > > I am working with a Xilinx Virtex II Pro  evaluation board,
wich
> > has two
> > > > > PowerPC 405 and I'm trying to boot a vanilla linux kernel
> > 2.6.23.14.
> > > > > Until now I've manged to make it uncompress the kernel, but it
> > doesn't boot.
> > > > > My question is how the initial execution (the one who
uncompresses
> > the
> > > > > kernel image) transfers the processor to the kernel itself.
I've
> > looked
> > > > > in the arch/ppc/boot/simple/relocate.S code and it jumps to
the
> > position
> > > > > 0x0 after uncompressing, is it right? The kernel is
uncompressed
> > at that
> > > > > position?
> > > >
> > > > Post your output log please.
> > > >
> > > > If your getting a message that the kernel is uncompressing, but
you
> > > > don't have any output beyond that then most likely your console
is
> > not
> > > > setup correctly.  If you've got a debugger, look at memory at
the
> > > > __log_buf location to see if there are any boot logs there.
> > > >
> > > > Cheers,
> > > > g.
> > > >
> > > >
> > > > --
> > > > Grant Likely, B.Sc., P.Eng.
> > > > Secret Lab Technologies Ltd.
> > > >
> > >
> > >
> > >
> > > --
> > > Ricardo Ayres Severo <severo.ricardo@gmail•com>
> >
> > > _______________________________________________
> > > Linuxppc-embedded mailing list
> > > Linuxppc-embedded@ozlabs•org
> > > https://ozlabs.org/mailman/listinfo/linuxppc-embedded
> >
> >
> >
>=20
>=20
>=20
> --
> Ricardo Ayres Severo <severo.ricardo@gmail•com>