Subject: Re: [PATCHv2] i2c: adds support for i2c bus on Freescale CPM1/CPM2 controllers

From: Jean Delvare <[email-masked]>
Date: Thu, 29 May 2008 17:52:26 +0200

On Wed, 21 May 2008 18:39:42 +0200, Jochen Friedrich wrote:
> This driver uses the port of 2.4 code from Vitaly Bordug
> <[email-masked]> and the actual algorithm used by the i2c
> driver of the DBox code on cvs.tuxboc.org from Felix Domke
> ([email-masked]) and Gillem ([email-masked]) converted to an
> of_platform_driver. Tested on CPM1 (MPC823 on dbox2 hardware) and
> CPM2 (MPC8272).
> 
> Signed-off-by: Jochen Friedrich <[email-masked]>
> ---
>  drivers/i2c/busses/Kconfig   |   10 +
>  drivers/i2c/busses/Makefile  |    1 +
>  drivers/i2c/busses/i2c-cpm.c |  745 ++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 756 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/i2c/busses/i2c-cpm.c
> 
> Changes since last version:
> - change bus-frequency -> clock-frequency to comply to OF standard.
> 

Applied, thanks. And thanks a lot to Wolfram for the review :)

-- 
Jean Delvare