Subject: [PATCH 6/7] ide-pmac: add ->init_dev method

From: Bartlomiej Zolnierkiewicz <[email-masked]>
Date: Fri, 13 Jun 2008 01:13:09 +0200

There should be no functional changes caused by this patch.

Cc: Benjamin Herrenschmidt <[email-masked]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email-masked]>
---
 drivers/ide/ppc/pmac.c |   27 ++++++++++++++++++---------
 1 file changed, 18 insertions(+), 9 deletions(-)

Index: b/drivers/ide/ppc/pmac.c
===================================================================
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -941,7 +941,23 @@ static u8 pmac_ide_cable_detect(ide_hwif
 	return ATA_CBL_PATA40;
 }
 
+static void pmac_ide_init_dev(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	pmac_ide_hwif_t *pmif =
+		(pmac_ide_hwif_t *)drv_get_drvdata(hwif->gendev.parent);
+
+	if (pmif->mediabay) {
+#ifdef CONFIG_PMAC_MEDIABAY
+		if (check_media_bay(np->parent, MB_CD) == -ENODEV)
+			return;
+#endif
+		drive->noprobe = 1;
+	}
+}
+
 static const struct ide_port_ops pmac_ide_ata6_port_ops = {
+	.init_dev		= pmac_ide_init_dev,
 	.set_pio_mode		= pmac_ide_set_pio_mode,
 	.set_dma_mode		= pmac_ide_set_dma_mode,
 	.selectproc		= pmac_ide_kauai_selectproc,
@@ -949,6 +965,7 @@ static const struct ide_port_ops pmac_id
 };
 
 static const struct ide_port_ops pmac_ide_ata4_port_ops = {
+	.init_dev		= pmac_ide_init_dev,
 	.set_pio_mode		= pmac_ide_set_pio_mode,
 	.set_dma_mode		= pmac_ide_set_dma_mode,
 	.selectproc		= pmac_ide_selectproc,
@@ -956,6 +973,7 @@ static const struct ide_port_ops pmac_id
 };
 
 static const struct ide_port_ops pmac_ide_port_ops = {
+	.init_dev		= pmac_ide_init_dev,
 	.set_pio_mode		= pmac_ide_set_pio_mode,
 	.set_dma_mode		= pmac_ide_set_dma_mode,
 	.selectproc		= pmac_ide_selectproc,
@@ -1065,15 +1083,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *p
 	       hwif->index, model_name[pmif->kind], pmif->aapl_bus_id,
 	       pmif->mediabay ? " (mediabay)" : "", hwif->irq);
 
-	if (pmif->mediabay) {
-#ifdef CONFIG_PMAC_MEDIABAY
-		if (check_media_bay(np->parent, MB_CD) == -ENODEV)
-			break;
-#endif
-		hwif->drives[0].noprobe = 1;
-		hwif->drives[1].noprobe = 1;
-	}
-
 	idx[0] = hwif->index;
 
 	ide_device_add(idx, &d);