From: Anton Vorontsov <avorontsov@ru•mvista.com>
To: Kumar Gala <galak@kernel•crashing.org>
Cc: linuxppc-dev@ozlabs•org
Subject: Re: [PATCH] powerpc: add FHCI USB, FSL MCU, FSL UPM and GPIO LEDs bindings
Date: Thu, 3 Jul 2008 22:24:41 +0400 [thread overview]
Message-ID: <20080703182440.GA2576@polina.dev.rtsoft.ru> (raw)
In-Reply-To: <EC062FA3-9CF8-4A94-95C7-2AAF22754A9C@kernel.crashing.org>
On Thu, Jul 03, 2008 at 12:50:01PM -0500, Kumar Gala wrote:
>
> On Jul 3, 2008, at 12:48 PM, Anton Vorontsov wrote:
>
>> This patch adds few bindings for the new drivers to be submitted
>> through
>> the appropriate maintainers.
>>
>> Signed-off-by: Anton Vorontsov <avorontsov@ru•mvista.com>
>> ---
>>
>> Segher, thanks for the comments on the previous version. Do you see
>> any
>> issues with this one or anything I could improve further?
>>
>> And if there are no issues... Kumar, could you apply this for
>> powerpc-next?
>>
>> Thanks.
>>
>> Documentation/powerpc/booting-without-of.txt | 111 +++++++++++++++++
>> +++++++++
>> 1 files changed, 111 insertions(+), 0 deletions(-)
>>
>> diff --git a/Documentation/powerpc/booting-without-of.txt b/
>> Documentation/powerpc/booting-without-of.txt
>> index b68684d..a7ea549 100644
>> --- a/Documentation/powerpc/booting-without-of.txt
>> +++ b/Documentation/powerpc/booting-without-of.txt
>> @@ -62,6 +62,10 @@ Table of Contents
>> s) Freescale on board FPGA
>> t) Freescael MSI interrupt controller
>> u) Freescale General-purpose Timers Module
>> + v) Freescale QUICC Engine USB Controller
>> + w) Freescale MCU with MPC8349E-mITX compatible firmware
>
> MCU doesn't mean much to me. Its good to expand out the acronym at
> least once.
MCU stands for MicroController Unit, and even expanded this doesn't
mean much to anybody. :-) Freescale documentation names it as boards'
"MCU Subsystem", that is, the chip provides fan control, GPIOs,
software halt, etc. Basically, it is boards' power management companion
chip. I don't know how to name it more correctly, so I adhered to
documentation's naming (they simply call it MCU).
^^ I'll add some of these words to the node description though.
Thanks,
--
Anton Vorontsov
email: cbouatmailru@gmail•com
irc://irc.freenode.net/bd2
next prev parent reply other threads:[~2008-07-03 18:24 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-03 17:48 [PATCH] powerpc: add FHCI USB, FSL MCU, FSL UPM and GPIO LEDs bindings Anton Vorontsov
2008-07-03 17:50 ` Kumar Gala
2008-07-03 18:24 ` Anton Vorontsov [this message]
2008-07-03 18:39 ` Kumar Gala
2008-07-04 16:53 ` [PATCH v2] " Anton Vorontsov
2008-07-15 13:21 ` Kumar Gala
2008-07-15 16:10 ` Anton Vorontsov
2008-07-15 16:17 ` Kumar Gala
2008-07-15 16:23 ` Kumar Gala
2008-07-15 17:48 ` Anton Vorontsov
2008-07-04 7:53 ` [PATCH] " Wolfgang Grandegger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080703182440.GA2576@polina.dev.rtsoft.ru \
--to=avorontsov@ru$(echo .)mvista.com \
--cc=galak@kernel$(echo .)crashing.org \
--cc=linuxppc-dev@ozlabs$(echo .)org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox