From: Scott Wood <scottwood@freescale•com>
To: galak@kernel•crashing.org
Cc: linuxppc-dev@ozlabs•org
Subject: [PATCH 4/6] Add fsl,magic-packet to, and clean up, the gianfar binding.
Date: Fri, 11 Jul 2008 18:04:43 -0500 [thread overview]
Message-ID: <20080711230443.GC3854@loki.buserror.net> (raw)
In-Reply-To: <20080711230328.GA3835@loki.buserror.net>
Signed-off-by: Scott Wood <scottwood@freescale•com>
---
Documentation/powerpc/dts-bindings/fsl/tsec.txt | 31 +++++++++--------------
1 files changed, 12 insertions(+), 19 deletions(-)
diff --git a/Documentation/powerpc/dts-bindings/fsl/tsec.txt b/Documentation/powerpc/dts-bindings/fsl/tsec.txt
index 583ef6b..cf55fa4 100644
--- a/Documentation/powerpc/dts-bindings/fsl/tsec.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/tsec.txt
@@ -24,46 +24,39 @@ Example:
* Gianfar-compatible ethernet nodes
-Required properties:
+Properties:
- device_type : Should be "network"
- model : Model of the device. Can be "TSEC", "eTSEC", or "FEC"
- compatible : Should be "gianfar"
- reg : Offset and length of the register set for the device
- - mac-address : List of bytes representing the ethernet address of
+ - local-mac-address : List of bytes representing the ethernet address of
this controller
- - interrupts : <a b> where a is the interrupt number and b is a
- field that represents an encoding of the sense and level
- information for the interrupt. This should be encoded based on
- the information in section 2) depending on the type of interrupt
- controller you have.
- - interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
+ - interrupts : For FEC devices, the first interrupt is the device's
+ interrupt. For TSEC and eTSEC devices, the first interrupt is
+ transmit, the second is receive, and the third is error.
- phy-handle : The phandle for the PHY connected to this ethernet
controller.
- fixed-link : <a b c d e> where a is emulated phy id - choose any,
but unique to the all specified fixed-links, b is duplex - 0 half,
1 full, c is link speed - d#10/d#100/d#1000, d is pause - 0 no
pause, 1 pause, e is asym_pause - 0 no asym_pause, 1 asym_pause.
-
-Recommended properties:
-
- phy-connection-type : a string naming the controller/PHY interface type,
i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id", "sgmii",
"tbi", or "rtbi". This property is only really needed if the connection
is of type "rgmii-id", as all other connection types are detected by
hardware.
-
+ - fsl,magic-packet : If present, indicates that the hardware supports
+ waking up via magic packet.
Example:
ethernet@24000 {
- #size-cells = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <24000 1000>;
- mac-address = [ 00 E0 0C 00 73 00 ];
- interrupts = <d 3 e 3 12 3>;
- interrupt-parent = <40000>;
- phy-handle = <2452000>
+ reg = <0x24000 0x1000>;
+ local-mac-address = [ 00 E0 0C 00 73 00 ];
+ interrupts = <29 2 30 2 34 2>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy0>
};
--
1.5.6.rc1.6.gc53ad.dirty
next prev parent reply other threads:[~2008-07-11 23:13 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-11 23:03 [PATCH 1/6] Document Freescale power management nodes, and the sleep property Scott Wood
2008-07-11 23:04 ` [PATCH 3/6] mpc83xx: Power Management support Scott Wood
2008-07-15 13:14 ` Kumar Gala
2008-07-11 23:04 ` Scott Wood [this message]
2008-07-15 13:14 ` [PATCH 4/6] Add fsl, magic-packet to, and clean up, the gianfar binding Kumar Gala
2008-07-16 13:59 ` Kumar Gala
2008-07-11 23:04 ` [PATCH 5/6] gianfar: Add magic packet and suspend/resume support Scott Wood
2008-07-16 14:00 ` Kumar Gala
2008-07-11 23:04 ` [PATCH 6/6] mpc8313erdb: Add power management to the device tree Scott Wood
2008-07-15 13:14 ` Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080711230443.GC3854@loki.buserror.net \
--to=scottwood@freescale$(echo .)com \
--cc=galak@kernel$(echo .)crashing.org \
--cc=linuxppc-dev@ozlabs$(echo .)org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox