public inbox for linuxppc-dev@ozlabs.org 
 help / color / mirror / Atom feed
From: Anton Vorontsov <avorontsov@ru•mvista.com>
To: linuxppc-dev@ozlabs•org
Cc: Paul Mackerras <paulus@samba•org>
Subject: [PATCH 3/8] powerpc: remove default kexec/crash_kernel ops assignments
Date: Fri, 1 Aug 2008 18:14:18 +0400	[thread overview]
Message-ID: <20080801141418.GC1161@polina.dev.rtsoft.ru> (raw)
In-Reply-To: <20080801141306.GA29127@polina.dev.rtsoft.ru>

Default ops are implicit now.

Signed-off-by: Anton Vorontsov <avorontsov@ru•mvista.com>
---
 arch/powerpc/platforms/cell/celleb_setup.c     |    9 ---------
 arch/powerpc/platforms/cell/setup.c            |    6 ------
 arch/powerpc/platforms/embedded6xx/c2k.c       |    6 ------
 arch/powerpc/platforms/embedded6xx/prpmc2800.c |    6 ------
 arch/powerpc/platforms/maple/setup.c           |    6 ------
 arch/powerpc/platforms/powermac/setup.c        |    6 ------
 arch/powerpc/platforms/ps3/setup.c             |    4 ----
 7 files changed, 0 insertions(+), 43 deletions(-)

diff --git a/arch/powerpc/platforms/cell/celleb_setup.c b/arch/powerpc/platforms/cell/celleb_setup.c
index b11cb30..07c234f 100644
--- a/arch/powerpc/platforms/cell/celleb_setup.c
+++ b/arch/powerpc/platforms/cell/celleb_setup.c
@@ -45,7 +45,6 @@
 #include <asm/mmu.h>
 #include <asm/processor.h>
 #include <asm/io.h>
-#include <asm/kexec.h>
 #include <asm/prom.h>
 #include <asm/machdep.h>
 #include <asm/cputable.h>
@@ -226,9 +225,6 @@ define_machine(celleb_beat) {
 	.pci_setup_phb		= celleb_setup_phb,
 #ifdef CONFIG_KEXEC
 	.kexec_cpu_down		= beat_kexec_cpu_down,
-	.machine_kexec		= default_machine_kexec,
-	.machine_kexec_prepare	= default_machine_kexec_prepare,
-	.machine_crash_shutdown	= default_machine_crash_shutdown,
 #endif
 };
 
@@ -248,9 +244,4 @@ define_machine(celleb_native) {
 	.pci_probe_mode 	= celleb_pci_probe_mode,
 	.pci_setup_phb		= celleb_setup_phb,
 	.init_IRQ		= celleb_init_IRQ_native,
-#ifdef CONFIG_KEXEC
-	.machine_kexec		= default_machine_kexec,
-	.machine_kexec_prepare	= default_machine_kexec_prepare,
-	.machine_crash_shutdown	= default_machine_crash_shutdown,
-#endif
 };
diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c
index ab721b5..5930536 100644
--- a/arch/powerpc/platforms/cell/setup.c
+++ b/arch/powerpc/platforms/cell/setup.c
@@ -35,7 +35,6 @@
 #include <asm/mmu.h>
 #include <asm/processor.h>
 #include <asm/io.h>
-#include <asm/kexec.h>
 #include <asm/pgtable.h>
 #include <asm/prom.h>
 #include <asm/rtas.h>
@@ -289,9 +288,4 @@ define_machine(cell) {
 	.progress		= cell_progress,
 	.init_IRQ       	= cell_init_irq,
 	.pci_setup_phb		= cell_setup_phb,
-#ifdef CONFIG_KEXEC
-	.machine_kexec		= default_machine_kexec,
-	.machine_kexec_prepare	= default_machine_kexec_prepare,
-	.machine_crash_shutdown	= default_machine_crash_shutdown,
-#endif
 };
diff --git a/arch/powerpc/platforms/embedded6xx/c2k.c b/arch/powerpc/platforms/embedded6xx/c2k.c
index d0b25b8..19d3bc4 100644
--- a/arch/powerpc/platforms/embedded6xx/c2k.c
+++ b/arch/powerpc/platforms/embedded6xx/c2k.c
@@ -20,7 +20,6 @@
 #include <linux/seq_file.h>
 #include <linux/time.h>
 #include <linux/of.h>
-#include <linux/kexec.h>
 
 #include <asm/machdep.h>
 #include <asm/prom.h>
@@ -150,9 +149,4 @@ define_machine(c2k) {
 	.get_irq		= mv64x60_get_irq,
 	.restart		= c2k_restart,
 	.calibrate_decr		= generic_calibrate_decr,
-#ifdef CONFIG_KEXEC
-	.machine_kexec		= default_machine_kexec,
-	.machine_kexec_prepare	= default_machine_kexec_prepare,
-	.machine_crash_shutdown	= default_machine_crash_shutdown,
-#endif
 };
diff --git a/arch/powerpc/platforms/embedded6xx/prpmc2800.c b/arch/powerpc/platforms/embedded6xx/prpmc2800.c
index 5a19b9a..e40b5a8 100644
--- a/arch/powerpc/platforms/embedded6xx/prpmc2800.c
+++ b/arch/powerpc/platforms/embedded6xx/prpmc2800.c
@@ -19,7 +19,6 @@
 #include <asm/prom.h>
 #include <asm/system.h>
 #include <asm/time.h>
-#include <asm/kexec.h>
 
 #include <mm/mmu_decl.h>
 
@@ -158,9 +157,4 @@ define_machine(prpmc2800){
 	.get_irq		= mv64x60_get_irq,
 	.restart		= prpmc2800_restart,
 	.calibrate_decr		= generic_calibrate_decr,
-#ifdef CONFIG_KEXEC
-	.machine_kexec		= default_machine_kexec,
-	.machine_kexec_prepare	= default_machine_kexec_prepare,
-	.machine_crash_shutdown	= default_machine_crash_shutdown,
-#endif
 };
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index 3647147..1be9b7c 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -51,7 +51,6 @@
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/io.h>
-#include <asm/kexec.h>
 #include <asm/pci-bridge.h>
 #include <asm/iommu.h>
 #include <asm/machdep.h>
@@ -336,9 +335,4 @@ define_machine(maple) {
       	.calibrate_decr		= generic_calibrate_decr,
 	.progress		= maple_progress,
 	.power_save		= power4_idle,
-#ifdef CONFIG_KEXEC
-	.machine_kexec		= default_machine_kexec,
-	.machine_kexec_prepare	= default_machine_kexec_prepare,
-	.machine_crash_shutdown	= default_machine_crash_shutdown,
-#endif
 };
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 88ccf3a..5e0999b 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -61,7 +61,6 @@
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/io.h>
-#include <asm/kexec.h>
 #include <asm/pci-bridge.h>
 #include <asm/ohare.h>
 #include <asm/mediabay.h>
@@ -741,11 +740,6 @@ define_machine(powermac) {
 	.pci_probe_mode		= pmac_pci_probe_mode,
 	.power_save		= power4_idle,
 	.enable_pmcs		= power4_enable_pmcs,
-#ifdef CONFIG_KEXEC
-	.machine_kexec		= default_machine_kexec,
-	.machine_kexec_prepare	= default_machine_kexec_prepare,
-	.machine_crash_shutdown	= default_machine_crash_shutdown,
-#endif
 #endif /* CONFIG_PPC64 */
 #ifdef CONFIG_PPC32
 	.pcibios_enable_device_hook = pmac_pci_enable_device_hook,
diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c
index a413abb..a8b99a6 100644
--- a/arch/powerpc/platforms/ps3/setup.c
+++ b/arch/powerpc/platforms/ps3/setup.c
@@ -23,7 +23,6 @@
 #include <linux/fs.h>
 #include <linux/root_dev.h>
 #include <linux/console.h>
-#include <linux/kexec.h>
 #include <linux/bootmem.h>
 
 #include <asm/machdep.h>
@@ -278,8 +277,5 @@ define_machine(ps3) {
 	.halt				= ps3_halt,
 #if defined(CONFIG_KEXEC)
 	.kexec_cpu_down			= ps3_kexec_cpu_down,
-	.machine_kexec			= default_machine_kexec,
-	.machine_kexec_prepare		= default_machine_kexec_prepare,
-	.machine_crash_shutdown		= default_machine_crash_shutdown,
 #endif
 };
-- 
1.5.5.4

  parent reply	other threads:[~2008-08-01 14:14 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-08-01 14:13 [RFC][PATCH 0/8] kexec/kdump support for ppc32 Anton Vorontsov
2008-08-01 14:14 ` [PATCH 1/8] powerpc: set up OF properties for ppc32 kexec Anton Vorontsov
2008-08-07 10:44   ` Michael Ellerman
2008-08-01 14:14 ` [PATCH 2/8] powerpc: make default kexec/crash_kernel ops implicit Anton Vorontsov
2008-08-01 14:14 ` Anton Vorontsov [this message]
2008-08-01 14:14 ` [PATCH 4/8] powerpc: add the ability for a classic ppc kernel to be loaded at 32M Anton Vorontsov
2008-08-01 18:49   ` Scott Wood
2008-08-01 20:38     ` Anton Vorontsov
2008-08-20  4:57       ` Paul Mackerras
2008-08-01 14:14 ` [PATCH 5/8] powerpc: allow to ioremap RAM addresses for kdump kernel on ppc32 Anton Vorontsov
2008-08-01 14:14 ` [PATCH 6/8] powerpc: set up OF properties for ppc32 kdump Anton Vorontsov
2008-08-07 10:47   ` Michael Ellerman
2008-08-07 11:11     ` Anton Vorontsov
2008-08-01 14:14 ` [PATCH 7/8] powerpc: implement crash_setup_regs for ppc32 Anton Vorontsov
2008-08-07 10:32   ` Michael Ellerman
2008-08-01 14:14 ` [PATCH 8/8] powerpc: last bits to support kdump on ppc32 Anton Vorontsov
2008-08-03 14:40   ` Michael Ellerman
2008-08-01 14:21 ` [RFC][PATCH 0/8] kexec/kdump support for ppc32 Kumar Gala
2008-08-01 14:46   ` Anton Vorontsov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080801141418.GC1161@polina.dev.rtsoft.ru \
    --to=avorontsov@ru$(echo .)mvista.com \
    --cc=linuxppc-dev@ozlabs$(echo .)org \
    --cc=paulus@samba$(echo .)org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox