From: Anton Vorontsov <avorontsov@ru•mvista.com>
To: Kumar Gala <galak@kernel•crashing.org>
Cc: Huang Changming <Chang-Ming.Huang@freescale•com>,
Liu Dave <DaveLiu@freescale•com>,
linuxppc-dev@ozlabs•org
Subject: [PATCH v5 0/2] MPC83xx PCI-E support
Date: Thu, 8 Jan 2009 04:30:06 +0300 [thread overview]
Message-ID: <20090108013006.GA31653@oksana.dev.rtsoft.ru> (raw)
Hi all,
Here comes another revision...
Changes since v4:
- Corrected PCI-E ranges for MPC837x boards;
- On MPC837XE-MDS boards PCIE2 can be disabled in favour of PCIE1 x2 mode,
in that case U-Boot disables PCIE2 via status property.
So, of_device_is_available() check is placed into mpc83xx_add_bridge();
- Rebased on top of galak/powerpc.git next.
Changes since v3:
- TAL register programming changed per new reference manual for 83xx
processors;
- dts files no longer specify config window in regs = <>. Instead, PCI-E
code reads cfg window BAR to determine config space area;
- dts files no longer disable pcie nodes, now Linux detects unconfigured
PCI-E controllers at run-time.
--
Anton Vorontsov
email: cbouatmailru@gmail•com
irc://irc.freenode.net/bd2
next reply other threads:[~2009-01-08 1:30 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-08 1:30 Anton Vorontsov [this message]
2009-01-08 1:31 ` [PATCH 1/2] powerpc/fsl_pci: Add MPC83xx PCI-E controller RC mode support Anton Vorontsov
2009-01-08 6:50 ` Kumar Gala
2009-01-08 19:10 ` Anton Vorontsov
2009-01-08 19:24 ` Kumar Gala
2009-01-08 21:55 ` [PATCH v6 " Anton Vorontsov
2009-01-09 0:17 ` Kumar Gala
2009-01-08 7:27 ` [PATCH 1/2] powerpc/fsl_pci: Add MPC83xx PCI-E controller RC modesupport Liu Dave
2009-01-08 20:59 ` Anton Vorontsov
2009-01-08 1:31 ` [PATCH 2/2] powerpc/83xx: Add PCI-E support for all MPC83xx boards with PCI-E Anton Vorontsov
2009-01-09 0:17 ` Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090108013006.GA31653@oksana.dev.rtsoft.ru \
--to=avorontsov@ru$(echo .)mvista.com \
--cc=Chang-Ming.Huang@freescale$(echo .)com \
--cc=DaveLiu@freescale$(echo .)com \
--cc=galak@kernel$(echo .)crashing.org \
--cc=linuxppc-dev@ozlabs$(echo .)org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox