Subject: [PATCH] alim15x3: Remove historical hacks, re-enable init_hwif for PowerPC

From: Anton Vorontsov <[email-masked]>
Date: Mon, 27 Apr 2009 22:47:42 +0400

Some time ago we had to disable init_hwif callback for PowerPC builds.
That was because of a historical IRQ overwrite in the driver, which
was causing IDE malfunction on the MPC8610HPCD PowerPC boards.

It's unclear whether this overwrite is still useful, but it is proven
to cause a bit of harm, and today some PowerPC targets (Xilinx ML510,
as reported by Roderick Colenbrander) need the init_hwif, so we have
to re-enable it and remove the overwrite.

Reported-by: Roderick Colenbrander <[email-masked]>
Suggested-by: Bartlomiej Zolnierkiewicz <[email-masked]>
Signed-off-by: Anton Vorontsov <[email-masked]>
---

On Mon, Apr 27, 2009 at 10:46:25AM +0200, Roderick Colenbrander wrote:
> >> Seems like this should allow MPC8610HPCD to work with Roderick's patch
> >> if the IDE controller is set to native mode and ALI south-bridge SIRQ
> >> tables are correctly set (or if this is not ALI's south-bridge).  Anton?
> >
> > OK, I'll test this approach.
> >
> 
> Did this approach work for you?

I'm sorry for the delay. Yes, it seem to work.

 drivers/ide/alim15x3.c |   10 +++-------
 1 files changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c
index 537da1c..e59b6de 100644
--- a/drivers/ide/alim15x3.c
+++ b/drivers/ide/alim15x3.c
@@ -402,27 +402,23 @@ static u8 ali_cable_detect(ide_hwif_t *hwif)
 	return cbl;
 }
 
-#if !defined(CONFIG_SPARC64) && !defined(CONFIG_PPC)
+#ifndef CONFIG_SPARC64
 /**
  *	init_hwif_ali15x3	-	Initialize the ALI IDE x86 stuff
  *	@hwif: interface to configure
  *
  *	Obtain the IRQ tables for an ALi based IDE solution on the PC
  *	class platforms. This part of the code isn't applicable to the
- *	Sparc and PowerPC systems.
+ *	Sparc systems.
  */
 
 static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif)
 {
-	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	u8 ideic, inmir;
 	s8 irq_routing_table[] = { -1,  9, 3, 10, 4,  5, 7,  6,
 				      1, 11, 0, 12, 0, 14, 0, 15 };
 	int irq = -1;
 
-	if (dev->device == PCI_DEVICE_ID_AL_M5229)
-		hwif->irq = hwif->channel ? 15 : 14;
-
 	if (isa_dev) {
 		/*
 		 * read IDE interface control
@@ -455,7 +451,7 @@ static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif)
 }
 #else
 #define init_hwif_ali15x3 NULL
-#endif /* !defined(CONFIG_SPARC64) && !defined(CONFIG_PPC) */
+#endif /* CONFIG_SPARC64 */
 
 /**
  *	init_dma_ali15x3	-	set up DMA on ALi15x3
-- 
1.6.2.2