Subject: [PATCH] Fix wrong register read address and add interrupt acknowledge.

From: Benjamin Krill <[email-masked]>
Date: Tue, 5 May 2009 21:11:16 +0200

The receive interrupt routine checks the wrong register if the
receive fifo is empty. Further an explicit interrupt acknowledge
write is introduced. In some circumstances another interrupt was
issued.

Signed-off-by: Benjamin Krill <[email-masked]>
---
 drivers/serial/nwpserial.c |    4 +++-
 1 files changed, 3 insertions(+), 1 deletions(-)

diff --git a/drivers/serial/nwpserial.c b/drivers/serial/nwpserial.c
index 32f3eaf..9e150b1 100644
--- a/drivers/serial/nwpserial.c
+++ b/drivers/serial/nwpserial.c
@@ -145,11 +145,13 @@ static irqreturn_t nwpserial_interrupt(int irq, void *dev_id)
 		ch = dcr_read(up->dcr_host, UART_RX);
 		if (up->port.ignore_status_mask != NWPSERIAL_STATUS_RXVALID)
 			tty_insert_flip_char(tty, ch, TTY_NORMAL);
-	} while (dcr_read(up->dcr_host, UART_RX) & UART_LSR_DR);
+	} while (dcr_read(up->dcr_host, UART_LSR) & UART_LSR_DR);

 	tty_flip_buffer_push(tty);
 	ret = IRQ_HANDLED;

+	/* clear interrupt */
+	dcr_write(up->dcr_host, UART_IIR, 1);
 out:
 	spin_unlock(&up->port.lock);
 	return ret;
--
1.5.4.5