Subject: Re: [PATCH v3 06/11] dma: Add MPC512x DMA driver

From: Anatolij Gustschin <[email-masked]>
Date: Mon, 1 Mar 2010 14:46:19 +0100

Hi Dan,

any chance this patch could be merged for 2.6.34 ?

Thanks,
Anatolij

On Fri,  5 Feb 2010 14:42:52 +0100
Anatolij Gustschin <[email-masked]> wrote:

> From: Piotr Ziecik <[email-masked]>
> 
> Adds initial version of MPC512x DMA driver.
> Only memory to memory transfers are currenly supported.
> 
> Signed-off-by: Piotr Ziecik <[email-masked]>
> Signed-off-by: Wolfgang Denk <[email-masked]>
> Signed-off-by: Anatolij Gustschin <[email-masked]>
> Cc: Dan Williams <[email-masked]>
> Cc: Grant Likely <[email-masked]>
> Cc: John Rigby <[email-masked]>
> ---
> No changes since v2
> 
> Changes since v1:
>  - move content of the mpc512x.h into the drivers .c file as
>    it is only used by this DMA driver
>  - use __devinit/__devexit/__devexit_p as requested
>  - add unregistration of the dma device
>  - remove meaningless comment
> 
> Changes since patch version submitted in May 2009:
>  - don't use wildcards in compatible property, use "fsl,mpc5121-dma"
>  - don't add "fsl,mpc5121-dma" compatible to of_bus_ids[] as the
>    dma device is part of IMMR
> 
>  drivers/dma/Kconfig       |    7 +
>  drivers/dma/Makefile      |    1 +
>  drivers/dma/mpc512x_dma.c |  800 +++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 808 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/dma/mpc512x_dma.c