Subject: Re: [PATCH] powerpc/mpc52xx: setup port_config and CDM settings through DT

From: Anatolij Gustschin <[email-masked]>
Date: Tue, 20 Mar 2012 17:28:43 +0100

On Mon, 19 Mar 2012 09:51:22 +0100
Anatolij Gustschin <[email-masked]> wrote:

> From: Heiko Schocher <[email-masked]>
> 
> If firmware does not setup the "GPS Port Configuration Register"
> and the "CDM 48MHz Fractional Divider Configuration Register",
> it can be corrected by additional properties in the device tree.
> Add appropriate code to utility functions and document used
> bindings.
> 
> Signed-off-by: Heiko Schocher <[email-masked]>
> cc: [email-masked]
> cc: [email-masked]
> cc: Grant Likely <[email-masked]>
> cc: Wolfgang Denk <[email-masked]>
> Signed-off-by: Anatolij Gustschin <[email-masked]>
> ---
>  .../devicetree/bindings/powerpc/fsl/mpc5200.txt    |   17 ++++++++++++
>  arch/powerpc/platforms/52xx/mpc52xx_common.c       |   27 ++++++++++++++++++++
>  2 files changed, 44 insertions(+), 0 deletions(-)

Applied for mpc5xxx next, thanks.

Anatolij