Subject: Re: [PATCH v12 17/21] powerpc/powernv: Shift VF resource with an offset

From: Wei Yang <[email-masked]>
Date: Mon, 2 Mar 2015 15:58:52 +0800

On Tue, Feb 24, 2015 at 11:10:33AM -0600, Bjorn Helgaas wrote:
>On Tue, Feb 24, 2015 at 3:00 AM, Bjorn Helgaas <[email-masked]> wrote:
>> On Tue, Feb 24, 2015 at 02:34:57AM -0600, Bjorn Helgaas wrote:
>>> From: Wei Yang <[email-masked]>
>>>
>>> On PowerNV platform, resource position in M64 implies the PE# the resource
>>> belongs to.  In some cases, adjustment of a resource is necessary to locate
>>> it to a correct position in M64.
>>>
>>> Add pnv_pci_vf_resource_shift() to shift the 'real' PF IOV BAR address
>>> according to an offset.
>>>
>>> [bhelgaas: rework loops, rework overlap check, index resource[]
>>> conventionally, remove pci_regs.h include, squashed with next patch]
>>> Signed-off-by: Wei Yang <[email-masked]>
>>> Signed-off-by: Bjorn Helgaas <[email-masked]>
>>
>> ...
>>
>>> +#ifdef CONFIG_PCI_IOV
>>> +static int pnv_pci_vf_resource_shift(struct pci_dev *dev, int offset)
>>> +{
>>> +     struct pci_dn *pdn = pci_get_pdn(dev);
>>> +     int i;
>>> +     struct resource *res, res2;
>>> +     resource_size_t size;
>>> +     u16 vf_num;
>>> +
>>> +     if (!dev->is_physfn)
>>> +             return -EINVAL;
>>> +
>>> +     /*
>>> +      * "offset" is in VFs.  The M64 windows are sized so that when they
>>> +      * are segmented, each segment is the same size as the IOV BAR.
>>> +      * Each segment is in a separate PE, and the high order bits of the
>>> +      * address are the PE number.  Therefore, each VF's BAR is in a
>>> +      * separate PE, and changing the IOV BAR start address changes the
>>> +      * range of PEs the VFs are in.
>>> +      */
>>> +     vf_num = pdn->vf_pes;
>>> +     for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
>>> +             res = &dev->resource[i + PCI_IOV_RESOURCES];
>>> +             if (!res->flags || !res->parent)
>>> +                     continue;
>>> +
>>> +             if (!pnv_pci_is_mem_pref_64(res->flags))
>>> +                     continue;
>>> +
>>> +             /*
>>> +              * The actual IOV BAR range is determined by the start address
>>> +              * and the actual size for vf_num VFs BAR.  This check is to
>>> +              * make sure that after shifting, the range will not overlap
>>> +              * with another device.
>>> +              */
>>> +             size = pci_iov_resource_size(dev, i + PCI_IOV_RESOURCES);
>>> +             res2.flags = res->flags;
>>> +             res2.start = res->start + (size * offset);
>>> +             res2.end = res2.start + (size * vf_num) - 1;
>>> +
>>> +             if (res2.end > res->end) {
>>> +                     dev_err(&dev->dev, "VF BAR%d: %pR would extend past %pR (trying to enable %d VFs shifted by %d)\n",
>>> +                             i, &res2, res, vf_num, offset);
>>> +                     return -EBUSY;
>>> +             }
>>> +     }
>>> +
>>> +     for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
>>> +             res = &dev->resource[i + PCI_IOV_RESOURCES];
>>> +             if (!res->flags || !res->parent)
>>> +                     continue;
>>> +
>>> +             if (!pnv_pci_is_mem_pref_64(res->flags))
>>> +                     continue;
>>> +
>>> +             size = pci_iov_resource_size(dev, i + PCI_IOV_RESOURCES);
>>> +             res2 = *res;
>>> +             res->start += size * offset;
>>
>> I'm still not happy about this fiddling with res->start.
>>
>> Increasing res->start means that in principle, the "size * offset" bytes
>> that we just removed from res are now available for allocation to somebody
>> else.  I don't think we *will* give that space to anything else because of
>> the alignment restrictions you're enforcing, but "res" now doesn't
>> correctly describe the real resource map.
>>
>> Would you be able to just update the BAR here while leaving the struct
>> resource alone?  In that case, it would look a little funny that lspci
>> would show a BAR value in the middle of the region in /proc/iomem, but
>> the /proc/iomem region would be more correct.
>
>I guess this would also require a tweak where we compute the addresses
>of each of the VF resources.  Today it's probably just "base + VF_num
>* size", where "base" is res->start.  We'd have to account for the
>offset there if we don't adjust it here.
>

Oh, this is really an interesting idea.

I will do some tests to see the result.

>>> +
>>> +             dev_info(&dev->dev, "VF BAR%d: %pR shifted to %pR (enabling %d VFs shifted by %d)\n",
>>> +                      i, &res2, res, vf_num, offset);
>>> +             pci_update_resource(dev, i + PCI_IOV_RESOURCES);
>>> +     }
>>> +     pdn->max_vfs -= offset;
>>> +     return 0;
>>> +}
>>> +#endif /* CONFIG_PCI_IOV */

-- 
Richard Yang
Help you, Help me