From: Gavin Shan <gwshan@linux•vnet.ibm.com>
To: Wei Yang <weiyang@linux•vnet.ibm.com>
Cc: aik@ozlabs•ru, gwshan@linux•vnet.ibm.com,
benh@kernel•crashing.org, linuxppc-dev@ozlabs•org
Subject: Re: [PATCH V4 6/6] powerpc/powernv: allocate sparse PE# when using M64 BAR in Single PE mode
Date: Wed, 19 Aug 2015 12:21:31 +1000 [thread overview]
Message-ID: <20150819022131.GB17094@gwshan> (raw)
In-Reply-To: <1439949704-8023-7-git-send-email-weiyang@linux.vnet.ibm.com>
On Wed, Aug 19, 2015 at 10:01:44AM +0800, Wei Yang wrote:
>When M64 BAR is set to Single PE mode, the PE# assigned to VF could be
>sparse.
>
>This patch restructures the patch to allocate sparse PE# for VFs when M64
>BAR is set to Single PE mode. Also it rename the offset to pe_num_map to
>reflect the content is the PE number.
>
>Signed-off-by: Wei Yang <weiyang@linux•vnet.ibm.com>
Reviewed-by: Gavin Shan <gwshan@linux•vnet.ibm.com>
>---
> arch/powerpc/include/asm/pci-bridge.h | 2 +-
> arch/powerpc/platforms/powernv/pci-ioda.c | 79 ++++++++++++++++++++++-------
> 2 files changed, 61 insertions(+), 20 deletions(-)
>
>diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
>index 8aeba4c..b3a226b 100644
>--- a/arch/powerpc/include/asm/pci-bridge.h
>+++ b/arch/powerpc/include/asm/pci-bridge.h
>@@ -213,7 +213,7 @@ struct pci_dn {
> #ifdef CONFIG_PCI_IOV
> u16 vfs_expanded; /* number of VFs IOV BAR expanded */
> u16 num_vfs; /* number of VFs enabled*/
>- int offset; /* PE# for the first VF PE */
>+ int *pe_num_map; /* PE# for the first VF PE or array */
> bool m64_single_mode; /* Use M64 BAR in Single Mode */
> #define IODA_INVALID_M64 (-1)
> int (*m64_map)[PCI_SRIOV_NUM_BARS];
>diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
>index 4bc83b8..779f52a 100644
>--- a/arch/powerpc/platforms/powernv/pci-ioda.c
>+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
>@@ -1243,7 +1243,7 @@ static int pnv_pci_vf_assign_m64(struct pci_dev *pdev, u16 num_vfs)
>
> /* Map the M64 here */
> if (pdn->m64_single_mode) {
>- pe_num = pdn->offset + j;
>+ pe_num = pdn->pe_num_map[j];
> rc = opal_pci_map_pe_mmio_window(phb->opal_id,
> pe_num, OPAL_M64_WINDOW_TYPE,
> pdn->m64_map[j][i], 0);
>@@ -1347,7 +1347,7 @@ void pnv_pci_sriov_disable(struct pci_dev *pdev)
> struct pnv_phb *phb;
> struct pci_dn *pdn;
> struct pci_sriov *iov;
>- u16 num_vfs;
>+ u16 num_vfs, i;
>
> bus = pdev->bus;
> hose = pci_bus_to_host(bus);
>@@ -1361,14 +1361,21 @@ void pnv_pci_sriov_disable(struct pci_dev *pdev)
>
> if (phb->type == PNV_PHB_IODA2) {
> if (!pdn->m64_single_mode)
>- pnv_pci_vf_resource_shift(pdev, -pdn->offset);
>+ pnv_pci_vf_resource_shift(pdev, -*pdn->pe_num_map);
>
> /* Release M64 windows */
> pnv_pci_vf_release_m64(pdev, num_vfs);
>
> /* Release PE numbers */
>- bitmap_clear(phb->ioda.pe_alloc, pdn->offset, num_vfs);
>- pdn->offset = 0;
>+ if (pdn->m64_single_mode) {
>+ for (i = 0; i < num_vfs; i++) {
>+ if (pdn->pe_num_map[i] != IODA_INVALID_PE)
>+ pnv_ioda_free_pe(phb, pdn->pe_num_map[i]);
>+ }
>+ } else
>+ bitmap_clear(phb->ioda.pe_alloc, *pdn->pe_num_map, num_vfs);
>+ /* Releasing pe_num_map */
>+ kfree(pdn->pe_num_map);
> }
> }
>
>@@ -1394,7 +1401,10 @@ static void pnv_ioda_setup_vf_PE(struct pci_dev *pdev, u16 num_vfs)
>
> /* Reserve PE for each VF */
> for (vf_index = 0; vf_index < num_vfs; vf_index++) {
>- pe_num = pdn->offset + vf_index;
>+ if (pdn->m64_single_mode)
>+ pe_num = pdn->pe_num_map[vf_index];
>+ else
>+ pe_num = *pdn->pe_num_map + vf_index;
>
> pe = &phb->ioda.pe_array[pe_num];
> pe->pe_number = pe_num;
>@@ -1436,6 +1446,7 @@ int pnv_pci_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
> struct pnv_phb *phb;
> struct pci_dn *pdn;
> int ret;
>+ u16 i;
>
> bus = pdev->bus;
> hose = pci_bus_to_host(bus);
>@@ -1458,20 +1469,42 @@ int pnv_pci_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
> return -EBUSY;
> }
>
>+ /* Allocating pe_num_map */
>+ if (pdn->m64_single_mode)
>+ pdn->pe_num_map = kmalloc(sizeof(*pdn->pe_num_map) * num_vfs,
>+ GFP_KERNEL);
>+ else
>+ pdn->pe_num_map = kmalloc(sizeof(*pdn->pe_num_map), GFP_KERNEL);
>+
>+ if (!pdn->pe_num_map)
>+ return -ENOMEM;
>+
> /* Calculate available PE for required VFs */
>- mutex_lock(&phb->ioda.pe_alloc_mutex);
>- pdn->offset = bitmap_find_next_zero_area(
>- phb->ioda.pe_alloc, phb->ioda.total_pe,
>- 0, num_vfs, 0);
>- if (pdn->offset >= phb->ioda.total_pe) {
>+ if (pdn->m64_single_mode) {
>+ for (i = 0; i < num_vfs; i++)
>+ pdn->pe_num_map[i] = IODA_INVALID_PE;
>+ for (i = 0; i < num_vfs; i++) {
>+ pdn->pe_num_map[i] = pnv_ioda_alloc_pe(phb);
>+ if (pdn->pe_num_map[i] == IODA_INVALID_PE) {
>+ ret = -EBUSY;
>+ goto m64_failed;
>+ }
>+ }
>+ } else {
>+ mutex_lock(&phb->ioda.pe_alloc_mutex);
>+ *pdn->pe_num_map = bitmap_find_next_zero_area(
>+ phb->ioda.pe_alloc, phb->ioda.total_pe,
>+ 0, num_vfs, 0);
>+ if (*pdn->pe_num_map >= phb->ioda.total_pe) {
>+ mutex_unlock(&phb->ioda.pe_alloc_mutex);
>+ dev_info(&pdev->dev, "Failed to enable VF%d\n", num_vfs);
>+ kfree(pdn->pe_num_map);
>+ return -EBUSY;
>+ }
>+ bitmap_set(phb->ioda.pe_alloc, *pdn->pe_num_map, num_vfs);
> mutex_unlock(&phb->ioda.pe_alloc_mutex);
>- dev_info(&pdev->dev, "Failed to enable VF%d\n", num_vfs);
>- pdn->offset = 0;
>- return -EBUSY;
> }
>- bitmap_set(phb->ioda.pe_alloc, pdn->offset, num_vfs);
> pdn->num_vfs = num_vfs;
>- mutex_unlock(&phb->ioda.pe_alloc_mutex);
>
> /* Assign M64 window accordingly */
> ret = pnv_pci_vf_assign_m64(pdev, num_vfs);
>@@ -1486,7 +1519,7 @@ int pnv_pci_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
> * Otherwise, the PE# for the VF will conflict with others.
> */
> if (!pdn->m64_single_mode) {
>- ret = pnv_pci_vf_resource_shift(pdev, pdn->offset);
>+ ret = pnv_pci_vf_resource_shift(pdev, *pdn->pe_num_map);
> if (ret)
> goto m64_failed;
> }
>@@ -1498,8 +1531,16 @@ int pnv_pci_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
> return 0;
>
> m64_failed:
>- bitmap_clear(phb->ioda.pe_alloc, pdn->offset, num_vfs);
>- pdn->offset = 0;
>+ if (pdn->m64_single_mode) {
>+ for (i = 0; i < num_vfs; i++) {
>+ if (pdn->pe_num_map[i] != IODA_INVALID_PE)
>+ pnv_ioda_free_pe(phb, pdn->pe_num_map[i]);
>+ }
>+ } else
>+ bitmap_clear(phb->ioda.pe_alloc, *pdn->pe_num_map, num_vfs);
>+
>+ /* Releasing pe_num_map */
>+ kfree(pdn->pe_num_map);
>
> return ret;
> }
>--
>1.7.9.5
>
next prev parent reply other threads:[~2015-08-19 2:22 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-19 2:01 [PATCH V4 0/6] Redesign SR-IOV on PowerNV Wei Yang
2015-08-19 2:01 ` [PATCH V4 1/6] powerpc/powernv: don't enable SRIOV when VF BAR has non 64bit-prefetchable BAR Wei Yang
2015-10-02 8:55 ` Alexey Kardashevskiy
2015-10-08 6:29 ` Wei Yang
2015-08-19 2:01 ` [PATCH V4 2/6] powerpc/powernv: simplify the calculation of iov resource alignment Wei Yang
2015-10-02 8:58 ` Alexey Kardashevskiy
2015-10-08 6:39 ` Wei Yang
2015-08-19 2:01 ` [PATCH V4 3/6] powerpc/powernv: use one M64 BAR in Single PE mode for one VF BAR Wei Yang
2015-08-19 2:21 ` Gavin Shan
2015-10-02 9:29 ` Alexey Kardashevskiy
2015-10-08 7:06 ` Wei Yang
2015-08-19 2:01 ` [PATCH V4 4/6] powerpc/powernv: replace the hard coded boundary with gate Wei Yang
2015-08-19 2:01 ` [PATCH V4 5/6] powerpc/powernv: boundary the total VF BAR size instead of the individual one Wei Yang
2015-10-02 9:51 ` Alexey Kardashevskiy
2015-10-08 7:13 ` Wei Yang
2015-08-19 2:01 ` [PATCH V4 6/6] powerpc/powernv: allocate sparse PE# when using M64 BAR in Single PE mode Wei Yang
2015-08-19 2:21 ` Gavin Shan [this message]
2015-10-02 10:05 ` Alexey Kardashevskiy
2015-10-08 7:19 ` Wei Yang
2015-08-26 5:11 ` [PATCH V4 0/6] Redesign SR-IOV on PowerNV Alexey Kardashevskiy
2015-08-26 8:06 ` Alexey Kardashevskiy
2015-10-02 10:07 ` Alexey Kardashevskiy
2015-10-07 2:43 ` Michael Ellerman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150819022131.GB17094@gwshan \
--to=gwshan@linux$(echo .)vnet.ibm.com \
--cc=aik@ozlabs$(echo .)ru \
--cc=benh@kernel$(echo .)crashing.org \
--cc=linuxppc-dev@ozlabs$(echo .)org \
--cc=weiyang@linux$(echo .)vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox