From: Cyril Bur <cyrilbur@gmail•com>
To: linuxppc-dev@lists•ozlabs.org, wei.guo.simon@gmail•com
Cc: mikey@neuling•org, anton@samba•org
Subject: [PATCH v3 21/21] powerpc: Remove do_load_up_transact_{fpu,altivec}
Date: Wed, 17 Aug 2016 13:43:23 +1000 [thread overview]
Message-ID: <20160817034323.23053-22-cyrilbur@gmail.com> (raw)
In-Reply-To: <20160817034323.23053-1-cyrilbur@gmail.com>
Previous rework of TM code leaves these functions unused
Signed-off-by: Cyril Bur <cyrilbur@gmail•com>
---
arch/powerpc/include/asm/tm.h | 5 -----
arch/powerpc/kernel/fpu.S | 26 --------------------------
arch/powerpc/kernel/vector.S | 25 -------------------------
3 files changed, 56 deletions(-)
diff --git a/arch/powerpc/include/asm/tm.h b/arch/powerpc/include/asm/tm.h
index c22d704..82e06ca 100644
--- a/arch/powerpc/include/asm/tm.h
+++ b/arch/powerpc/include/asm/tm.h
@@ -9,11 +9,6 @@
#ifndef __ASSEMBLY__
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-extern void do_load_up_transact_fpu(struct thread_struct *thread);
-extern void do_load_up_transact_altivec(struct thread_struct *thread);
-#endif
-
extern void tm_enable(void);
extern void tm_reclaim(struct thread_struct *thread,
unsigned long orig_msr, uint8_t cause);
diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S
index 181c187..08d14b0 100644
--- a/arch/powerpc/kernel/fpu.S
+++ b/arch/powerpc/kernel/fpu.S
@@ -50,32 +50,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX); \
#define REST_32FPVSRS(n,c,base) __REST_32FPVSRS(n,__REG_##c,__REG_##base)
#define SAVE_32FPVSRS(n,c,base) __SAVE_32FPVSRS(n,__REG_##c,__REG_##base)
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-/* void do_load_up_transact_fpu(struct thread_struct *thread)
- *
- * This is similar to load_up_fpu but for the transactional version of the FP
- * register set. It doesn't mess with the task MSR or valid flags.
- * Furthermore, we don't do lazy FP with TM currently.
- */
-_GLOBAL(do_load_up_transact_fpu)
- mfmsr r6
- ori r5,r6,MSR_FP
-#ifdef CONFIG_VSX
-BEGIN_FTR_SECTION
- oris r5,r5,MSR_VSX@h
-END_FTR_SECTION_IFSET(CPU_FTR_VSX)
-#endif
- SYNC
- MTMSRD(r5)
-
- addi r7,r3,THREAD_CKFPSTATE
- lfd fr0,FPSTATE_FPSCR(r7)
- MTFSF_L(fr0)
- REST_32FPVSRS(0, R4, R7)
-
- blr
-#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
-
/*
* Load state from memory into FP registers including FPSCR.
* Assumes the caller has enabled FP in the MSR.
diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S
index 7dc4021..bc85bdf 100644
--- a/arch/powerpc/kernel/vector.S
+++ b/arch/powerpc/kernel/vector.S
@@ -7,31 +7,6 @@
#include <asm/page.h>
#include <asm/ptrace.h>
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-/* void do_load_up_transact_altivec(struct thread_struct *thread)
- *
- * This is similar to load_up_altivec but for the transactional version of the
- * vector regs. It doesn't mess with the task MSR or valid flags.
- * Furthermore, VEC laziness is not supported with TM currently.
- */
-_GLOBAL(do_load_up_transact_altivec)
- mfmsr r6
- oris r5,r6,MSR_VEC@h
- MTMSRD(r5)
- isync
-
- li r4,1
- stw r4,THREAD_USED_VR(r3)
-
- li r10,THREAD_CKVRSTATE+VRSTATE_VSCR
- lvx v0,r10,r3
- mtvscr v0
- addi r10,r3,THREAD_CKVRSTATE
- REST_32VRS(0,r4,r10)
-
- blr
-#endif
-
/*
* Load state from memory into VMX registers including VSCR.
* Assumes the caller has enabled VMX in the MSR.
--
2.9.3
prev parent reply other threads:[~2016-08-17 3:44 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-17 3:43 [PATCH v3 00/21] Consistent TM structures Cyril Bur
2016-08-17 3:43 ` [PATCH v3 01/21] selftests/powerpc: Compile selftests against headers without AT_HWCAP2 Cyril Bur
2016-08-17 3:43 ` [PATCH v3 02/21] powerpc: Always restore FPU/VEC/VSX if hardware transactional memory in use Cyril Bur
2016-08-19 6:33 ` Michael Neuling
2016-08-23 0:57 ` Cyril Bur
2016-08-17 3:43 ` [PATCH v3 03/21] powerpc: Add check_if_tm_restore_required() to giveup_all() Cyril Bur
2016-08-19 6:40 ` Michael Neuling
2016-08-17 3:43 ` [PATCH v3 04/21] powerpc: Return the new MSR from msr_check_and_set() Cyril Bur
2016-08-17 3:53 ` Cyril Bur
2016-08-19 6:47 ` Michael Neuling
2016-08-17 3:43 ` [PATCH v3 05/21] powerpc: Never giveup a reclaimed thread when enabling kernel {fp, altivec, vsx} Cyril Bur
2016-08-17 3:43 ` [PATCH v3 06/21] powerpc: signals: Stop using current in signal code Cyril Bur
2016-08-17 4:31 ` kbuild test robot
2016-08-17 3:43 ` [PATCH v3 07/21] selftests/powerpc: Check for VSX preservation across userspace preemption Cyril Bur
2016-08-17 3:43 ` [PATCH v3 08/21] selftests/powerpc: Rework FPU stack placement macros and move to header file Cyril Bur
2016-08-17 3:43 ` [PATCH v3 09/21] selftests/powerpc: Move VMX stack frame macros " Cyril Bur
2016-08-17 3:43 ` [PATCH v3 10/21] selftests/powerpc: Introduce GPR asm helper " Cyril Bur
2016-08-17 3:43 ` [PATCH v3 11/21] selftests/powerpc: Add transactional memory defines Cyril Bur
2016-08-17 3:43 ` [PATCH v3 12/21] selftests/powerpc: Allow tests to extend their kill timeout Cyril Bur
2016-08-17 3:43 ` [PATCH v3 13/21] selftests/powerpc: Add TM tcheck helpers in C Cyril Bur
2016-08-17 3:43 ` [PATCH v3 14/21] selftests/powerpc: Check that signals always get delivered Cyril Bur
2016-08-17 3:43 ` [PATCH v3 15/21] selftests/powerpc: Add checks for transactional GPRs in signal contexts Cyril Bur
2016-08-17 3:43 ` [PATCH v3 16/21] selftests/powerpc: Add checks for transactional FPUs " Cyril Bur
2016-08-17 3:43 ` [PATCH v3 17/21] selftests/powerpc: Add checks for transactional VMXs " Cyril Bur
2016-08-17 3:43 ` [PATCH v3 18/21] selftests/powerpc: Add checks for transactional VSXs " Cyril Bur
2016-08-17 3:43 ` [PATCH v3 19/21] powerpc: tm: Always use fp_state and vr_state to store live registers Cyril Bur
2016-08-19 4:04 ` Simon Guo
2016-08-17 3:43 ` [PATCH v3 20/21] powerpc: tm: Rename transct_(*) to ck(\1)_state Cyril Bur
2016-08-17 3:43 ` Cyril Bur [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160817034323.23053-22-cyrilbur@gmail.com \
--to=cyrilbur@gmail$(echo .)com \
--cc=anton@samba$(echo .)org \
--cc=linuxppc-dev@lists$(echo .)ozlabs.org \
--cc=mikey@neuling$(echo .)org \
--cc=wei.guo.simon@gmail$(echo .)com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox