From: "Michal Suchánek" <msuchanek@suse•de>
To: Nicholas Piggin <npiggin@gmail•com>
Cc: Tulio Magno Quites Machado Filho <tuliom@linux•ibm.com>,
linuxppc-dev@lists•ozlabs.org
Subject: Re: [RFC PATCH 23/27] powerpc/64: system call implement the bulk of the logic in C
Date: Wed, 2 Oct 2019 10:21:21 +0200 [thread overview]
Message-ID: <20190923124751.GC18205@kitsune.suse.cz> (raw)
In-Reply-To: <20190915012813.29317-24-npiggin@gmail.com>
On Sun, Sep 15, 2019 at 11:28:09AM +1000, Nicholas Piggin wrote:
> System call entry and particularly exit code is beyond the limit of what
> is reasonable to implement in asm.
>
> This conversion moves all conditional branches out of the asm code,
> except for the case that all GPRs should be restored at exit.
>
> Null syscall test is about 5% faster after this patch, because the exit
> work is handled under local_irq_disable, and the hard mask and pending
> interrupt replay is handled after that, which avoids games with MSR.
>
> Signed-off-by: Nicholas Piggin <npiggin@gmail•com>
>
> v3:
> - Fix !KUAP build [mpe]
> - Fix BookE build/boot [mpe]
> - Don't trace irqs with MSR[RI]=0
> - Don't allow syscall_exit_prepare to be ftraced, because function
> graph tracing which traces exits barfs after the IRQ state is
> prepared for kernel exit.
> - Fix BE syscall table to use normal function descriptors now that they
> are called from C.
> - Comment syscall_exit_prepare.
...
> -#if defined(CONFIG_VIRT_CPU_ACCOUNTING_NATIVE) && defined(CONFIG_PPC_SPLPAR)
> -BEGIN_FW_FTR_SECTION
> - /* see if there are any DTL entries to process */
> - ld r10,PACALPPACAPTR(r13) /* get ptr to VPA */
> - ld r11,PACA_DTL_RIDX(r13) /* get log read index */
> - addi r10,r10,LPPACA_DTLIDX
> - LDX_BE r10,0,r10 /* get log write index */
> - cmpd r11,r10
> - beq+ 33f
> - bl accumulate_stolen_time
> - REST_GPR(0,r1)
> - REST_4GPRS(3,r1)
> - REST_2GPRS(7,r1)
> - addi r9,r1,STACK_FRAME_OVERHEAD
> -33:
> -END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
> -#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE && CONFIG_PPC_SPLPAR */
...
> diff --git a/arch/powerpc/kernel/syscall_64.c b/arch/powerpc/kernel/syscall_64.c
> new file mode 100644
> index 000000000000..1d2529824588
> --- /dev/null
> +++ b/arch/powerpc/kernel/syscall_64.c
> @@ -0,0 +1,195 @@
> +#include <linux/err.h>
> +#include <asm/book3s/64/kup-radix.h>
> +#include <asm/cputime.h>
> +#include <asm/hw_irq.h>
> +#include <asm/kprobes.h>
> +#include <asm/paca.h>
> +#include <asm/ptrace.h>
> +#include <asm/reg.h>
> +#include <asm/signal.h>
> +#include <asm/switch_to.h>
> +#include <asm/syscall.h>
> +#include <asm/time.h>
> +
> +extern void __noreturn tabort_syscall(void);
> +
> +typedef long (*syscall_fn)(long, long, long, long, long, long);
> +
> +long system_call_exception(long r3, long r4, long r5, long r6, long r7, long r8, unsigned long r0, struct pt_regs *regs)
> +{
> + unsigned long ti_flags;
> + syscall_fn f;
> +
> + BUG_ON(!(regs->msr & MSR_PR));
> +
> + if (IS_ENABLED(CONFIG_PPC_TRANSACTIONAL_MEM) &&
> + unlikely(regs->msr & MSR_TS_T))
> + tabort_syscall();
> +
> + account_cpu_user_entry();
> +
> +#ifdef CONFIG_PPC_SPLPAR
> + if (IS_ENABLED(CONFIG_VIRT_CPU_ACCOUNTING_NATIVE) &&
> + firmware_has_feature(FW_FEATURE_SPLPAR)) {
> + struct lppaca *lp = get_lppaca();
> +
> + if (unlikely(local_paca->dtl_ridx != lp->dtl_idx))
sparse complains about this, and in time.c this it converted like this:
if (unlikely(local_paca->dtl_ridx != be64_to_cpu(lp->dtl_idx)))
The removed code has a LDX_BE there so there should be some conversion
involved, right?
Thanks
Michal
next prev parent reply other threads:[~2019-10-02 8:28 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-15 1:27 [RFC PATCH 00/27] current interrupt series plus scv syscall Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 01/27] powerpc/64s/exception: Introduce INT_DEFINE parameter block for code generation Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 02/27] powerpc/64s/exception: Add GEN_COMMON macro that uses INT_DEFINE parameters Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 03/27] powerpc/64s/exception: Add GEN_KVM " Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 04/27] powerpc/64s/exception: Expand EXC_COMMON and EXC_COMMON_ASYNC macros Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 05/27] powerpc/64s/exception: Move all interrupt handlers to new style code gen macros Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 06/27] powerpc/64s/exception: Remove old INT_ENTRY macro Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 07/27] powerpc/64s/exception: Remove old INT_COMMON macro Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 08/27] powerpc/64s/exception: Remove old INT_KVM_HANDLER Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 09/27] powerpc/64s/exception: Add ISIDE option Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 10/27] powerpc/64s/exception: move real->virt switch into the common handler Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 11/27] powerpc/64s/exception: move soft-mask test to common code Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 12/27] powerpc/64s/exception: move KVM " Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 13/27] powerpc/64s/exception: remove confusing IEARLY option Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 14/27] powerpc/64s/exception: remove the SPR saving patch code macros Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 15/27] powerpc/64s/exception: trim unused arguments from KVMTEST macro Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 16/27] powerpc/64s/exception: hdecrementer avoid touching the stack Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 17/27] powerpc/64s/exception: re-inline some handlers Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 18/27] powerpc/64s/exception: Clean up SRR specifiers Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 19/27] powerpc/64s/exception: add more comments for interrupt handlers Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 20/27] powerpc/64s/exception: only test KVM in SRR interrupts when PR KVM is supported Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 21/27] powerpc/64s/exception: soft nmi interrupt should not use ret_from_except Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 22/27] powerpc/64: system call remove non-volatile GPR save optimisation Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 23/27] powerpc/64: system call implement the bulk of the logic in C Nicholas Piggin
2019-10-02 8:21 ` Michal Suchánek [this message]
2019-10-02 3:10 ` Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 24/27] powerpc/64s: interrupt return " Nicholas Piggin
2019-10-02 8:20 ` Michal Suchánek
2019-09-15 1:28 ` [RFC PATCH 25/27] powerpc/64s/exception: remove lite interrupt return Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 26/27] powerpc/64s/exception: treat NIA below __end_interrupts as soft-masked Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 27/27] powerpc/64s: system call support for scv/rfscv instructions Nicholas Piggin
2019-10-02 8:21 ` Michal Suchánek
2019-10-02 8:20 ` [RFC PATCH 00/27] current interrupt series plus scv syscall Michal Suchánek
2019-10-02 3:13 ` Nicholas Piggin
2019-10-30 12:55 ` Michal Suchánek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190923124751.GC18205@kitsune.suse.cz \
--to=msuchanek@suse$(echo .)de \
--cc=linuxppc-dev@lists$(echo .)ozlabs.org \
--cc=npiggin@gmail$(echo .)com \
--cc=tuliom@linux$(echo .)ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox