Subject: [PATCH] powerpc: dts: t1040rdb: fix ports names for Seville Ethernet switch

From: Maxim Kiselev <[email-masked]>
Date: Thu, 30 Dec 2021 13:43:28 +0300

Fix network interface names for the switch ports according to labels
that are written on the front panel of the board. They start from ETH3
and end at ETH10.

Fixes: e69eb0824d8c ("powerpc: dts: t1040rdb: add ports for Seville
Ethernet switch")
Signed-off-by: Maxim Kiselev <[email-masked]>
Reviewed-by: Maxim Kochetkov <[email-masked]>
---
 arch/powerpc/boot/dts/fsl/t1040rdb.dts | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/boot/dts/fsl/t1040rdb.dts b/arch/powerpc/boot/dts/fsl/t1040rdb.dts
index af0c8a6f56138..b6733e7e65805 100644
--- a/arch/powerpc/boot/dts/fsl/t1040rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1040rdb.dts
@@ -119,7 +119,7 @@ &seville_port0 {
 	managed = "in-band-status";
 	phy-handle = <&phy_qsgmii_0>;
 	phy-mode = "qsgmii";
-	label = "ETH5";
+	label = "ETH3";
 	status = "okay";
 };
 
@@ -135,7 +135,7 @@ &seville_port2 {
 	managed = "in-band-status";
 	phy-handle = <&phy_qsgmii_2>;
 	phy-mode = "qsgmii";
-	label = "ETH7";
+	label = "ETH5";
 	status = "okay";
 };
 
@@ -151,7 +151,7 @@ &seville_port4 {
 	managed = "in-band-status";
 	phy-handle = <&phy_qsgmii_4>;
 	phy-mode = "qsgmii";
-	label = "ETH9";
+	label = "ETH7";
 	status = "okay";
 };
 
@@ -167,7 +167,7 @@ &seville_port6 {
 	managed = "in-band-status";
 	phy-handle = <&phy_qsgmii_6>;
 	phy-mode = "qsgmii";
-	label = "ETH11";
+	label = "ETH9";
 	status = "okay";
 };
 
-- 
2.32.0