Subject: Re: [PATCH v5 2/4] PCI: layerscape: Add suspend/resume for ls1021a

From: Manivannan Sadhasivam <[email-masked]>
Date: Mon, 4 Dec 2023 16:29:31 +0530

On Fri, Dec 01, 2023 at 11:17:10AM -0500, Frank Li wrote:
> Add suspend/resume support for Layerscape LS1021a.
> 
> In the suspend path, PME_Turn_Off message is sent to the endpoint to
> transition the link to L2/L3_Ready state. In this SoC, there is no way to
> check if the controller has received the PME_To_Ack from the endpoint or
> not. So to be on the safer side, the driver just waits for
> PCIE_PME_TO_L2_TIMEOUT_US before asserting the SoC specific PMXMTTURNOFF
> bit to complete the PME_Turn_Off handshake. Then the link would enter L2/L3
> state depending on the VAUX supply.
> 
> In the resume path, the link is brought back from L2 to L0 by doing a
> software reset.
> 
> Signed-off-by: Frank Li <[email-masked]>

One comment below. With that addressed,

Reviewed-by: Manivannan Sadhasivam <[email-masked]>

> ---
> 
> Notes:
>     Change from v4 to v5
>     - update comit message
>     - remove a empty line
>     - use comments
>     /* Reset the PEX wrapper to bring the link out of L2 */
>     - pci->pp.ops = pcie->drvdata->ops,
>     ls_pcie_host_ops to the "ops" member of layerscape_drvdata.
>     - don't set pcie->scfg = NULL at error path
>     
>     Change from v3 to v4
>     - update commit message.
>     - it is reset a glue logic part for PCI controller.
>     - use regmap_write_bits() to reduce code change.
>     
>     Change from v2 to v3
>     - update according to mani's feedback
>     change from v1 to v2
>     - change subject 'a' to 'A'
> 
>  drivers/pci/controller/dwc/pci-layerscape.c | 81 ++++++++++++++++++++-
>  1 file changed, 80 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
> index aea89926bcc4f..8bdaae9be7d56 100644
> --- a/drivers/pci/controller/dwc/pci-layerscape.c
> +++ b/drivers/pci/controller/dwc/pci-layerscape.c
> @@ -35,11 +35,19 @@
>  #define PF_MCR_PTOMR		BIT(0)
>  #define PF_MCR_EXL2S		BIT(1)
>  
> +/* LS1021A PEXn PM Write Control Register */
> +#define SCFG_PEXPMWRCR(idx)	(0x5c + (idx) * 0x64)
> +#define PMXMTTURNOFF		BIT(31)
> +#define SCFG_PEXSFTRSTCR	0x190
> +#define PEXSR(idx)		BIT(idx)
> +
>  #define PCIE_IATU_NUM		6
>  
>  struct ls_pcie_drvdata {
>  	const u32 pf_off;
> +	const struct dw_pcie_host_ops *ops;
>  	int (*exit_from_l2)(struct dw_pcie_rp *pp);
> +	bool scfg_support;
>  	bool pm_support;
>  };
>  
> @@ -47,6 +55,8 @@ struct ls_pcie {
>  	struct dw_pcie *pci;
>  	const struct ls_pcie_drvdata *drvdata;
>  	void __iomem *pf_base;
> +	struct regmap *scfg;
> +	int index;
>  	bool big_endian;
>  };
>  
> @@ -171,18 +181,70 @@ static int ls_pcie_host_init(struct dw_pcie_rp *pp)
>  	return 0;
>  }
>  
> +static void scfg_pcie_send_turnoff_msg(struct regmap *scfg, u32 reg, u32 mask)
> +{
> +	/* Send PME_Turn_Off message */
> +	regmap_write_bits(scfg, reg, mask, mask);
> +
> +	/*
> +	 * There is no specific register to check for PME_To_Ack from endpoint.
> +	 * So on the safe side, wait for PCIE_PME_TO_L2_TIMEOUT_US.
> +	 */
> +	mdelay(PCIE_PME_TO_L2_TIMEOUT_US/1000);
> +
> +	/*
> +	 * Layerscape hardware reference manual recommends clearing the PMXMTTURNOFF bit
> +	 * to complete the PME_Turn_Off handshake.
> +	 */
> +	regmap_write_bits(scfg, reg, mask, 0);
> +}
> +
> +static void ls1021a_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	struct ls_pcie *pcie = to_ls_pcie(pci);
> +
> +	scfg_pcie_send_turnoff_msg(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), PMXMTTURNOFF);
> +}
> +
> +static int scfg_pcie_exit_from_l2(struct regmap *scfg, u32 reg, u32 mask)
> +{
> +	/* Reset the PEX wrapper to bring the link out of L2 */
> +	regmap_write_bits(scfg, reg, mask, mask);
> +	regmap_write_bits(scfg, reg, mask, 0);
> +
> +	return 0;
> +}
> +
> +static int ls1021a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	struct ls_pcie *pcie = to_ls_pcie(pci);
> +
> +	return scfg_pcie_exit_from_l2(pcie->scfg, SCFG_PEXSFTRSTCR, PEXSR(pcie->index));
> +}
> +
>  static const struct dw_pcie_host_ops ls_pcie_host_ops = {
>  	.host_init = ls_pcie_host_init,
>  	.pme_turn_off = ls_pcie_send_turnoff_msg,
>  };
>  
> +static const struct dw_pcie_host_ops ls1021a_pcie_host_ops = {
> +	.host_init = ls_pcie_host_init,
> +	.pme_turn_off = ls1021a_pcie_send_turnoff_msg,
> +};
> +
>  static const struct ls_pcie_drvdata ls1021a_drvdata = {
> -	.pm_support = false,
> +	.pm_support = true,
> +	.scfg_support = true,
> +	.ops = &ls1021a_pcie_host_ops,
> +	.exit_from_l2 = ls1021a_pcie_exit_from_l2,
>  };
>  
>  static const struct ls_pcie_drvdata layerscape_drvdata = {
>  	.pf_off = 0xc0000,
>  	.pm_support = true,
> +	.ops = &ls_pcie_host_ops;
>  	.exit_from_l2 = ls_pcie_exit_from_l2,
>  };
>  
> @@ -205,6 +267,8 @@ static int ls_pcie_probe(struct platform_device *pdev)
>  	struct dw_pcie *pci;
>  	struct ls_pcie *pcie;
>  	struct resource *dbi_base;
> +	u32 index[2];
> +	int ret;
>  
>  	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
>  	if (!pcie)
> @@ -220,6 +284,7 @@ static int ls_pcie_probe(struct platform_device *pdev)
>  	pci->pp.ops = &ls_pcie_host_ops;

This should be removed now.

- Mani

>  
>  	pcie->pci = pci;
> +	pci->pp.ops = pcie->drvdata->ops;
>  
>  	dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
>  	pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
> @@ -230,6 +295,20 @@ static int ls_pcie_probe(struct platform_device *pdev)
>  
>  	pcie->pf_base = pci->dbi_base + pcie->drvdata->pf_off;
>  
> +	if (pcie->drvdata->scfg_support) {
> +		pcie->scfg = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,pcie-scfg");
> +		if (IS_ERR(pcie->scfg)) {
> +			dev_err(dev, "No syscfg phandle specified\n");
> +			return PTR_ERR(pcie->scfg);
> +		}
> +
> +		ret = of_property_read_u32_array(dev->of_node, "fsl,pcie-scfg", index, 2);
> +		if (ret)
> +			return ret;
> +
> +		pcie->index = index[1];
> +	}
> +
>  	if (!ls_pcie_is_bridge(pcie))
>  		return -ENODEV;
>  
> -- 
> 2.34.1
> 

-- 
மணிவண்ணன் சதாசிவம்