Subject: [PATCH] * mpc8313erdb.dts: Fixed eTSEC interrupt assignment.

From: Roland Lezuo <[email-masked]>
Date: Fri, 4 Sep 2009 12:31:25 +0200

The following patch is needed to correctly assign the IRQs for the gianfar driver on the MPC8313ERDB-revc boards. ERR and TX are swapped as well as the interrupt lines for the two devices.

Signed-off-by: Roland Lezuo <[email-masked]>

---
 arch/powerpc/boot/dts/mpc8313erdb.dts |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts
index 761faa7..907a445 100644
--- a/arch/powerpc/boot/dts/mpc8313erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8313erdb.dts
@@ -188,7 +188,7 @@
 			compatible = "gianfar";
 			reg = <0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <37 0x8 36 0x8 35 0x8>;
+			interrupts = <32 0x8 33 0x8 34 0x8>;
 			interrupt-parent = <&ipic>;
 			tbi-handle = < &tbi0 >;
 			/* Vitesse 7385 isn't on the MDIO bus */
@@ -223,7 +223,7 @@
 			reg = <0x25000 0x1000>;
 			ranges = <0x0 0x25000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <34 0x8 33 0x8 32 0x8>;
+			interrupts = <35 0x8 36 0x8 37 0x8>;
 			interrupt-parent = <&ipic>;
 			tbi-handle = < &tbi1 >;
 			phy-handle = < &phy4 >;
-- 
1.6.0.4

Regards
Roland Lezuo
please CC personally as I'm not subscribed.